Microstructure Study of Pulsed Laser Beam Welded Oxide Dispersion-Strengthened (ODS) Eurofer Steel

Oxide dispersion-strengthened (ODS) Eurofer steel was laser welded using a short pulse duration and a designed pattern to minimise local heat accumulation. With a laser power of 2500 W and a duration of more than 3 ms, a full penetration can be obtained in a 1 mm thick plate. Material loss was observed in the fusion zone due to metal...

Influence of microstructure on mechanical properties of bainitic steels in railway applications

Wheel–rail contact creates high stresses in both rails and wheels, which can lead to different damage, such as plastic deformation, wear and rolling contact fatigue (RCF). It is important to use high-quality steels that are resistant to these damages. Mechanical properties and failure of steels are determined by various microstructural...

Microstructure and mechanical properties of medium carbon steel deposits obtained via Wire and Arc Additive Manufacturing using metal-cored wire

Wire and arc additive manufacturing (WAAM) is a 3D metal printing technique based on the arc welding process. WAAM is considered to be suitable to produce large-scale metallic components by combining high deposition rate and low cost. WAAM uses conventional welding consumable wires as feedstock. In some applications of steel components, one-off...

On the Relationship between the Chromium Concentration, the Z-Phase Formation and the Creep Strength of Ferritic-Martensitic Steels

In this study, the long term creep strength behavior of commercial heat resistant martensitic/ferritic steels with Cr levels ranging from 1 to 15 wt% is analyzed by linking their computed equilibrium compositions to their creep properties. At lower Cr levels, the calculated strength due to precipitation hardening agrees well with the...

Elemental segregation during resistance spot welding of boron containing advanced high strength steels

The partitioning behaviour of carbon, phosphorous and boron during the solidification of a resistance spot weld pool was studied using experimental simulations and a phase field model. Steels with varying carbon, phosphorous and boron contents were designed and subjected to a range of resistant spot welding thermal cycles. Mechanical properties...