Effect of alloying and microstructure on formability of advanced high-strength steels processed via quenching and partitioning

The article focuses on the effect of alloying and microstructure on formability of advanced high strength steels (AHSSs) processed via quenching and partitioning (Q&P). Three different Q&P steels with different combination of alloying elements and volume fraction of retained austenite are subjected to uniaxial tensile and Nakajima...

Temperature dependence of the static and dynamic behaviour in a quenching and partitioning processed low-si steel

Because of their excellent combination of strength and ductility, quenching and partitioning (Q & P) steels have a great chance of being added to the third generation of advanced high strength steels. The large ductility of Q & P steels arises from the presence of 10% to 15% of retained austenite which postpones necking due to the...

The role of the austenite grain size in the martensitic transformation in low carbon steels

There is sufficient experimental evidence to propose that the formation kinetics of athermal martensite directly depends on the austenite grain structure from which the martensite forms. Yet, this dependence is frequently ignored. The present study investigates the role of the prior austenite grain size (PAGS) in the martensitic...

Microstructure evolution during high-temperature partitioning of a Medium-Mn Quenching and Partitioning steel

Medium-Mn Quenching & Partitioning (Q&P) steels have been recently considered as potential candidates for the 3rd generation advanced high-strength steels. The processing of these steels aims to induce the partitioning of substitutional alloying elements from martensite to austenite during an isothermal treatment at high temperature,...

Fracture mechanisms and microstructure in a medium Mn quenching and partitioning steel exhibiting macrosegregation

A medium-Mn steel, exhibiting manganese macrosegregation, was investigated. In order to study how the microstructure development influences the fracture mechanisms, the steel was quenching and partitioning processed using two different partitioning temperatures. At 400 °C partitioning temperature, the microstructure exhibits intergranular...

Microstructural mechanisms controlling the mechanical behaviour of ultrafine grained martensite/austenite microstructures in a metastable stainless steel

This study unravels the microstructural mechanisms controlling the mechanical behaviour and austenite mechanical stability in ultrafine grained austenite/martensite (α′/γ) microstructures, created varying the austenitisation heating rate (0.1–10 °C/s) and temperature within the start-finish austenite formation temperatures (A_S − A...

The effect of heating rate and soaking time on microstructure of an advanced high strength steel

This work focuses on the effect of soaking time on the microstructure during ultrafast heat treatment of a 50% cold rolled low carbon steel with initial ferritic-pearlitic microstructure. Dilatometry analysis was used to estimate the effect of heating rate on the phase transformation temperatures and to select an appropriate inter-critical...

In-situ investigation of strain-induced martensitic transformation kinetics in an austenitic stainless steel by inductive measurements

An inductive sensor developed by Philips ATC has been used to study in-situ the austenite (γ) to martensite (α′) phase transformation kinetics during tensile testing in an AISI 301 austenitic stainless steel. A correlation between the sensor output signal and the volume fraction of α′-martensite has been found by comparing the results to the...