Searched for: subject%3A%22stress%22
(1 - 20 of 72)

Pages

List view
Grid view
document
Liang, M. (author)
Since the introduction of cementitious materials, shrinkage-induced earlyage cracking (EAC) has emerged as a significant issue that negatively influences the function, durability, and aesthetics of concrete structures like dams, tunnels, and underground garages. This thesis aims to develop new experimental and modelling techniques that help...
doctoral thesis 2024
document
Golchin, A. (author)
In the serviceability lifespan of thermo-active geo-structures such as energy-piles, soils surrounding these structures are exposed to a combination of mechanical and thermal loads. These loads are often complex (including cycles) and, depending on the state of the soils, the response of the surrounding soil to these loads may differ. Since the...
doctoral thesis 2023
document
Yan, R. (author)
High-strength steel (HSS) has higher strength but lower ductility than mild steel. The cross-section of the structural members may be reduced using HSS instead of mild steel, provided the buckling of elements does not govern the failure. The reduced member size benefits the environment and economy by means of less energy consumption, less carbon...
doctoral thesis 2023
document
Verma, N. (author)
Hydrogen has been contemplated as a desirable energy source of the future with enormous possibilities to create a carbon-neutral society. Since palladium (Pd) readily absorbs hydrogen even at low pressure and room temperature, Pd and its alloys are suitable for hydrogen production, purification, storage, gas sensors, and fuel cell catalyst....
doctoral thesis 2022
document
Zander, F. (author)
Organic matter plays a major role in global ecosystems and has several functions in terrestrial and marine environments. As organic matter impacts, among others, the rheological behaviour and settling rates of mineral sediment particles, it is of great relevance to the definition and maintenance of the nautical depth in ports and waterways. The...
doctoral thesis 2022
document
Shakeel, A. (author)
The nautical bottom (the level at which contact with a ship’s keel causes either damage or unacceptable effects on controllability and manoeuvrability of a ship) should be associated to a measurable physical characteristic. Bulk density is typically used as a criterion for nautical bottom by many ports worldwide. However, the rheological...
doctoral thesis 2022
document
Zhang, J. (author)
Cracks, which could nucleate and propagate in engineering structures, could have an adverse effect on mechanical performance and even lead to catastrophic failure. Thus, it is critical to investigate structural behavior under fracture, which requires an appropriate modeling methodology for fracture analysis. Furthermore, designing structures...
doctoral thesis 2022
document
Cui, Z. (author)
This dissertation presents a comprehensive and integrated study, including theory development, numerical simulation and experiment, for multi-physics driven electromigration in microelectronics. Multi-scale methodologies from atomistic modeling to continuum theory-based simulation have been developed. Moreover, extensive experimental testing,...
doctoral thesis 2021
document
Prisacaru, Alexandru (author)
This thesis describes a series of experiments, algorithms, and methodology development for implementing Prognostics and Health Management (PHM) in the field of automotive electronics. Furthermore, a new PHM framework is proposed explicitly tailored for the harsh environment electronics. In addition, the entire apparatus is built, such as the...
doctoral thesis 2021
document
Gonzalez Acosta, J.L. (author)
The material point method (MPM) is a numerical technique which has been demonstrated to be suitable for simulating numerous mechanical problems, particularly large deformation problems, while conserving mass,momentum and energy. MPM discretises material into points and solves the governing equations on a background mesh which discretises the...
doctoral thesis 2020
document
Hong, Z. (author)
Reducing weight and improving strength of structures have always been major design goals in the aerospace industry since its inception. In particular, strength directly affects the safety and serviceability of an airplane and is therefore of great importance in structural design. Improving the strength of an airframe can effectively increase its...
doctoral thesis 2020
document
Henriquez, M. (author)
This thesis is about the hydrodynamic processes that occur when a nearshore sandbar migrates towards the shore driven by the waves. These processes are relevant because process-based morphological models have difficulty simulating coastal accretion events in contrast to erosion events. Simulating accretion events is important for engineering...
doctoral thesis 2019
document
Eftekharimilani, P. (author)
The potential for weight reduction, ease of manufacturing and improved crashworthiness makes advanced and ultra high strength steels attractive for automotive applications. Resistance spot welding is by far the most widely used joining method in the automotive industry due to the high operating speeds, the reliability of the process and the...
doctoral thesis 2019
document
Landman, H.M. (author)
After several recent flight safety events, such as the accident of Air France flight 447 in 2009, investigators determined that surprise and startle can severely disrupt pilot responses. They concluded that pilots need to be better prepared for unexpected and potentially startling situations. In response, aviation safety authorities have...
doctoral thesis 2019
document
Bouquet, G.C. (author)
For the dimensioning of concrete structures it is customary to determine the forces and stresses occurring in construction elements on the basis of the prescribed loads. In an iterative process, the final dimensions of the elements and reinforcement are then determined. This process becomes less simple if not only the external loads, but also...
doctoral thesis 2019
document
Quiros Solano, W.F. (author)
Drug development is a complex, time-consuming (10 - 15 years) and expensive process. For a new medicine to reach the market, the net expenses covered by the pharmaceutical industry have been estimated to be around $2.6 billion. Nevertheless, the risk of finding adverse effects or toxicity cases once the drug is already on the market is still...
doctoral thesis 2019
document
Zhang, H. (author)
High power electronics with wide band gap semiconductors are becoming the most promising devices in new energy power suppliers and converters. Highly reliable die attach materials, serving as one of interconnections, play critical roles in power electronic packages and modules. Among which, the nanosilver paste/film has become a promising die...
doctoral thesis 2019
document
Muraro, S. (author)
The geotechnical description of peats represents one of the main challenges in the Netherlands to assure the required safety standard and performance of the flood defence infrastructure. Almost a third of the country is situated below the sea and the rivers level with about 60% to 70% of the population and economic assets concentrated in low...
doctoral thesis 2019
document
Ma, X. (author)
Chemical degradation of cementitious materials is a serious threat to the durability and performance of concrete structures. External sulfate attack is one of the situations that may cause gradual but severe damage. Sulfate ions present in seawater, rivers, groundwater and industrial effluent can penetrate into the hardened concrete, and react...
doctoral thesis 2018
document
Solcerova, A. (author)
Since more than half of the world population already lives in cities, it is important to understand the urban climate and its particularities. One of the typical aspects of urban areas is that cities are generally warmer than their rural surrounding. This phenomenon was first time described 200 years ago in the case of London and is commonly...
doctoral thesis 2018
Searched for: subject%3A%22stress%22
(1 - 20 of 72)

Pages

List view
Grid view