A New High Step-Up SC-Based Grid-Tied Inverter With Limited Charging Spike for RES Applications

Switched capacitor multilevel inverter topologies are attractive among industrial power electronics researchers due to their applicability in sustainable energy systems such as renewable energy source (RES) applications. In this paper, a new switched capacitor (SC)-based grid-tied seven-level inverter is proposed for renewable energy sources ...

The Advances in Conversion Techniques in Triboelectric Energy Harvesting: A Review

A triboelectric nanogenerator (TENG) is a new transducer utilizing contact electrification and electrostatic induction to transform mechanical energy into electric energy. Due to its high energy density and flexibility, it can be employed to make electronic devices self-powered by harvesting ambient mechanical energy in many application...

Performance Optimization of SSHC Rectifiers for Piezoelectric Energy Harvesting

In the past decades, inductor-based synchronized switch harvesting on inductor (SSHI) rectifiers have been widely employed in many active rectification systems for piezoelectric energy harvesting. Although SSHI rectifiers achieve high energy extraction performance compared to passive full-bridge rectifier (FBR), the performance greatly...

A Dynamically Reconfigurable Recursive Switched-Capacitor DC-DC Converter with Adaptive Load Ability Enhancement

Multiple voltage conversion ratio (VCR) recursive switched-capacitor (SC) dc-dc converters, based on several basic 2:1 converters, are widely used for on-chip power supplies due to their flexible VCRs for higher energy efficiency. However, conventional multiple VCR SC converters usually have one or more 2:1 converters unused for some VCRs,...

X-type step-up multi-level inverter with reduced component count based on switched-capacitor concept

This paper aims to present a novel switched-capacitor multi-level inverter. The presented structure generates a staircase near sinusoidal AC voltage by using a single DC source and a few capacitors to step-up the input voltage. The nearest level control (NLC) strategy is used to control the operation of the converter. These switching states...

A Switched-Capacitor DC-DC Converter Powering an LC Oscillator to Achieve 85% System Peak Power Efficiency and -65 dBc Spurious Tones

In this paper, we propose a new scheme to directly power a 4.9-5.6GHz LC oscillator from a recursive switched-capacitor DC-DC converter. A finite-state machine is integrated to automatically adjust the conversion ratio and switching frequency of the converter such that its DC output voltage is within ±5% of the desired 1V across input voltage...

Analysis and Design of Power Supply Circuits for RF Oscillators

This article presents guidelines for designing the power supply blocks of RF oscillators. To preserve their spectral purity, the requirements on the noise and ripple of the supply voltage are firstly evaluated based on the oscillator supply pushing factor and the oscillator Figure-of-Merit (FOM). Those specifications are then employed to design...

A New Modular Multilevel Inverter Based on Step-Up Switched-Capacitor Modules

A new structure of switched capacitor multilevel inverter (SCMLI) capable of voltage boosting and with self-balancing ability is introduced in this article. This advantage is the result of a step by step rise of capacitor voltages in each module, supplied by just one DC voltage source. The proposed topology generates a sinusoidal output...

A 0.5-V 1.6-mW 2.4-GHz Fractional-N All-Digital PLL for Bluetooth LE With PVT-Insensitive TDC Using Switched-Capacitor Doubler in 28-nm CMOS

This paper proposes an ultra-low-voltage (ULV) fractional-N all-digital PLL (ADPLL) powered from a single 0.5-V supply. While its digitally controlled oscillator (DCO) runs directly at 0.5 V, an internal switched-capacitor dc-dc converter ``doubles'' the supply voltage to all the digital circuitry and particularly regulates the time-to...

A Fully Integrated Discrete-Time Superheterodyne Receiver

The zero/low intermediate frequency (IF) receiver (RX) architecture has enabled full CMOS integration. As the technology scales and wireless standards become ever more challenging, the issues related to time-varying dc offsets, the second-order nonlinearity, and flicker noise become more critical. In this paper, we propose a new architecture of...

A Low-Power Microcontroller in a 40-nm CMOS Using Charge Recycling

A 40-nm microcontroller featuring voltage stacked memory and logic is presented. This involved connecting the power domains of the memory and logic in series, such that the ground of one power domain is connected to the positive supply rail of the other. In this paper, an ARM Cortex-M0+ and its peripherals are powered from 0 V to V<sub>DD<...

Analysis and Design of I/Q Charge-Sharing Band-Pass-Filter for Superheterodyne Receivers

A complex quadrature charge-sharing (CS) technique is proposed to implement a discrete-time band-pass filter (BPF) with a programmable bandwidth of 20–100 MHz. The BPF is part of a cellular superheterodyne receiver and completely determines the receiver frequency selectivity. It operates at the full sampling rate of up to 5.2 GHz corresponding...

Analysis and Design of a High-Order Discrete-Time Passive IIR Low-Pass Filter

In this paper, we propose a discrete-time IIR low-pass filter that achieves a high-order of filtering through a charge-sharing rotation. Its sampling rate is then multiplied through pipelining. The first stage of the filter can operate in either a voltage-sampling or charge-sampling mode. It uses switches, capacitors and a simple gm-cell, rather...

Features and Design Constraints for an Optimized SC Front-End Circuit for Capacitive Sensors With a Wide Dynamic Range