Mechanical properties of 3D printed CMT-WAAM 316 LSi stainless steel walls

The use of 3D printed stainless steel requires a deep knowledge of its mechanical properties. This paper presents material characterisation of 316LSi austenitic stainless-steel coupons manufactured by CMT-WAAM, considering different deposition directions. The specimens were tested according to ISO 6892-1, the fractures surfaces were examined...

Thermal effects on the performance of ultrasonically welded CF/PPS joints and its correlation to the degree of crystallinity at the weldline

The effect of temperature on the lap shear strength (LSS) and failure mechanisms of ultrasonically welded carbon fibre reinforced polyphenylene sulphide (CF/PPS) joints was investigated, correlating the weld performance to the crystallinity degree of PPS at the weldline. The single-lap shear tests were carried out at temperatures ranging from...

The influence of carbon nanotube buckypaper/poly (ether imide) mats on the thermal properties of poly (ether imide) and poly (aryl ether ketone)/carbon fiber laminates

The use of carbon nanotube buckypapers (BP) has boosted their use in polymeric composites. However, their low permeability makes processing difficult and limits their use. This work's essential contribution is to define the best parameters to process the buckypapers through vacuum filtration technique and the use of electrospun poly (ether...

Characterization of epoxy-asphalt binders by differential scanning calorimetry

Asphalt binders incorporating different modifiers is a common practice but empirically driven in most of the cases. Therefore, the fundamental understanding of modification mechanisms in asphalt binders is needed to design polymer modified binders in a controllable manner, especially today in which new modification technologies are proposed....

Physical Integration of a Photovoltaic-Battery System: A Thermal Analysis

Solar-battery systems are still expensive, bulky, and space consuming. To tackle these issues, we propose a novel device that combines all the components of a solar-battery system in one device. This device might help reduce installation cost compared to the current solar-battery systems as well as provide a plug-and-play solution. However, this...

Thermal inductance in GaN devices

Using the analogue of the electric inductance, we reveal the properties of the thermal inductance in GaN-based light-emitting diode devices by testing their transient thermal behaviors. We find that the devices exhibit a transient thermal response under step-down or step-up currents and observe notable inductive phenomena of the temperature...

Revisiting the melting temperature of NpO2 and the challenges associated with high temperature actinide compound measurements

This work revisits the melting behaviour of neptunium dioxide, an actinide compound which can be produced in the nuclear fuel during operation, and which has an important impact on the nuclear fuel and waste radioactivity especially on the very long term. The present experimental approach employs remote laser heating under controlled atmosphere...