Pages
- 1
- 2
- document
- van de Ven, E.A. (author), Langelaar, Matthijs (author), Ayas, C. (author), Maas, Robert (author), van Keulen, A. (author) abstract 2018
- document
- van de Ven, Emiel (author), Driessen, Anton (author), van Keulen, A. (author), Langelaar, Matthijs (author) abstract 2015
- document
- Munro, D.P. (author), Ayas, C. (author), Langelaar, Matthijs (author), van Keulen, A. (author) abstract 2017
- document
- van de Ven, E.A. (author), Verboom, J.M. (author), Ayas, C. (author), Langelaar, Matthijs (author), Maas, Robert (author), van Keulen, A. (author) abstract 2017
- document
- Yang, Y. (author), Ayas, C. (author), van Keulen, A. (author) abstract 2017
- document
- Yang, Y. (author), Ayas, C. (author), van Keulen, A. (author) abstract 2017
- document
-
van de Ven, E.A. (author), Hooijkamp, E.C. (author), Langelaar, Matthijs (author), van Keulen, A. (author)Designing transient thermal mechanical systems is a challenging task. Material can have many different functions: it can provide heat capacity, heat conduction, mechanical stiffness or even function as an actuator. Topology optimization can provide the engineer with valuable insight on such a problem. One of the most popular topology...conference paper 2015
- document
-
Picelli, R. (author), Vicente, W.M. (author), Pavanello, R. (author), van Keulen, A. (author)This article presents an evolutionary topology optimization method for mean compliance minimization of structures under design-dependent viscous fluid flow loads. The structural domain is governed by the elasticity equation and the fluid by the incompressible Stokes flow equations. When the modelling of a system consists in the interaction of...conference paper 2015
- document
-
Delissen, A.A.T.M. (author), Laro, Dick (author), Kleijnen, Harry (author), van Keulen, A. (author), Langelaar, Matthijs (author)In the design process of high-precision motion stages, the dynamic behavior is of paramount importance. Manual design of such a stage is a time-consuming process, involving many iterations between engineers responsible for mechanics, dynamics and control. By using topology optimization in combination with additive manufacturing, post...conference paper 2020
- document
-
Bakker, Coen (author), Zhang, L. (author), Higginson, Kristie (author), van Keulen, A. (author)Stiffened shells and plates are widely used in engineering. Their performance is highly influenced by the arrangement, or layout, of stiffeners on the base shell or plate and the geometric features, or topology, of these stiffeners. Moreover, modular design is beneficial, since it allows for increased quality control and mass production. In...journal article 2021
- document
-
Verbart, A. (author), Langelaar, Matthijs (author), van Keulen, A. (author)In this paper, we propose a unified aggregation and relaxation approach for topology optimization with stress constraints. Following this approach, we first reformulate the original optimization problem with a design-dependent set of constraints into an equivalent optimization problem with a fixed design-independent set of constraints. The next...journal article 2017
- document
-
van den Boom, S.J. (author), Abedi, Reza (author), van Keulen, A. (author), Aragon, A.M. (author)Phononic crystals can be designed to show band gaps—ranges of frequencies whose propagation is strongly attenuated in the material. In essence, their working principle is based on destructive interference of waves reflecting from the periodic arrangement of material interfaces (i.e., Bragg scattering). Consequently, capturing accurately the...journal article 2023
- document
-
van den Boom, S.J. (author), Zhang, J. (author), van Keulen, A. (author), Aragon, A.M. (author)During design optimization, a smooth description of the geometry is important, especially for problems that are sensitive to the way interfaces are resolved, e.g., wave propagation or fluid-structure interaction. A level set description of the boundary, when combined with an enriched finite element formulation, offers a smoother description...journal article 2020
- document
-
van de Ven, E.A. (author), Maas, Robert (author), Ayas, C. (author), Langelaar, Matthijs (author), van Keulen, A. (author)Although additive manufacturing (AM) allows for a large design freedom, there are some manufacturing limitations that have to be taken into consideration. One of the most restricting design rules is the minimum allowable overhang angle. To make topology optimization suitable for AM, several algorithms have been published to enforce a minimum...journal article 2021
- document
-
Zhang, J. (author), van Keulen, A. (author), Aragon, A.M. (author)We propose a fully immersed topology optimization procedure to design structures with tailored fracture resistance under linear elastic fracture mechanics assumptions for brittle materials. We use a level set function discretized by radial basis functions to represent the topology and the Interface-enriched Generalized Finite Element Method ...journal article 2022
- document
-
Misiun, Grzegorz (author), van de Ven, E.A. (author), Langelaar, Matthijs (author), Geijselaers, Hubert (author), van Keulen, A. (author), van den Boogaard, Ton (author), Ayas, C. (author)An important cause of failure in powder bed additive manufacturing is the distortion of the part due to thermal shrinkage during printing and the relaxation of residual stresses after its release from the base plate. In this paper, Additive Manufacturing simulations are coupled with Topology Optimization in order to generate designs that are...journal article 2021
- document
-
Mishra, V. (author), Ayas, C. (author), Langelaar, Matthijs (author), van Keulen, A. (author)A remarkable elastic anisotropy in plates of austenitic stainless steel produced by the Wire and Arc Additive Manufacturing process is recently reported. The Young's modulus depends on the angle of orientation with respect to the material deposition direction. Here, for the first time, this anisotropy is exploited to maximize structural...journal article 2022
- document
-
Koppen, S. (author), Langelaar, Matthijs (author), van Keulen, A. (author)High-tech equipment critically relies on flexures for precise manipulation and measurement. Through elastic deformation, flexures offer extreme position repeatability within a limited range of motion in their degrees of freedom, while constraining motion in the degrees of constraint. Topology optimization proves a prospective tool for the...journal article 2022
- document
-
Koppen, S. (author), Langelaar, Matthijs (author), van Keulen, A. (author)In topology optimization, the state of structures is typically obtained by numerically evaluating a discretized PDE-based model. The degrees of freedom of such a model can be partitioned in free and prescribed sets to define the boundary conditions. A multi-partition problem involves multiple partitions of the same discretization, typically...journal article 2022
- document
-
Ranjan, R. (author), Ayas, C. (author), Langelaar, Matthijs (author), van Keulen, A. (author)A novel constraint to prevent local overheating is presented for use in topology optimization (TO). The very basis for the constraint is the Additive Manufacturing (AM) process physics. AM enables fabrication of highly complex topologically optimized designs. However, local overheating is a major concern especially in metal AM processes...journal article 2022
Pages
- 1
- 2