Wind farms experience significant efficiency losses due to the aerodynamic interaction between turbines. A possible control technique to minimize these losses is yaw-based wake steering. This paper investigates the potential for improved performance of the Lillgrund wind farm through a detailed calibration of a low-fidelity engineering model aimed specifically at yaw-based wake steering. The importance of each model parameter is assessed through a sensitivity analysis. This work shows that the model is overparameterized as at least one model parameter can be excluded from the calibration. The performance of the calibrated model is tested through an uncertainty analysis, which showed that the model has a significant bias but low uncertainty when comparing the predicted wake losses with measured wake losses. The model is used to optimize the annual energy production of the Lillgrund wind farm by determining yaw angles for specific inflow conditions. A significant energy gain is found when the optimal yaw angles are calculated deterministically. However, the energy gain decreases drastically when uncertainty in input conditions is included. More robust yaw angles can be obtained when the input uncertainty is taken into account during the optimization, which yields an energy gain of approximately 3.4%.@en

Careful validation of the modelling and control actions is of vital importance to build confidence in the value of coordinated wind farm control (WFC). The efficiency of flow models applied to WFC should be evaluated to provide reliable assessment of the performance of WFC. In order to achieve that, FarmConners launches a common benchmark for code comparison to demonstrate the potential benefits of WFC, such as increased power production and mitigation of loads. The benchmark builds on available data sets from previous and ongoing campaigns: synthetic data from high-fidelity simulations, measurements from wind tunnel experiments, and field data from a real wind farm. The participating WFC models are first to be calibrated or trained using normal operation periods. For the blind test, both the axial induction and wake steering control approaches are included in the dataset and to be evaluated through the designed test cases. Three main test cases are specified, addressing the impact of WFC on single full wake, single partial wake, and multiple wake. The WFC model outcomes will be compared during the blind test phase, through power gain and wake loss reduction as well as alleviation of wake-added turbulence intensity and structural loads. The probabilistic validation will be based on the median and quartiles of the observations and WFC model predictions. Every benchmark participant will be involved in the final publication, where the comparison of different tools will be performed using the defined test cases. Instructions on how to participate are also provided on farmconners.readthedocs.io.@en