Lath martensite is important in industry because it is the key strengthening component in many advanced high strength steels. The study of crystallography and chemistry of lath martensite is extensive in the literature, however, mostly based on fully martensitic steels. In this work, lath martensite in dual phase steels is investigated with a focus on the substructure identification of the martensite islands and microstructural bands using electron backscattered diffraction, and on the influence of the accompanied tempering process during industrial coating process on the distribution of alloying elements using atom probe tomography. Unlike findings for the fully martensitic steels, no martensite islands with all 24 Kurdjumov-Sachs variants have been observed. Almost all martensite islands contain only one main packet with all six variants and minor variants from the remaining three packets of the same prior austenite grain. Similarly, the martensite bands are typically composed of connected domains originating from prior austenite grains, each containing one main packets (mostly with all variants) and few separate variants. The effect of tempering at ~450 °C (due to the industrial zinc coating process) has also been investigated. The results show a strong carbon partitioning to lath boundaries and Cottrell atmospheres at dislocation core regions due to the thermal process of coating. In contrast, auto-tempering contributes to the carbon redistribution only in a limited manner. The substitutional elements are all homogenously distributed. The phase transformation process has two effects on the material: mechanically, the earlier-formed laths are larger and softer and therefore more ductile (as revealed by nanoindentation); chemically, due to the higher dislocation density inside the later-formed laths, which are generally smaller, carbon Cottrell atmospheres are predominantly observed. ... Read more

Group IV materials with the hexagonal diamond crystal structure have been predicted to exhibit promising optical and electronic properties. In particular, hexagonal silicon–germanium (Si1–xGex) should be characterized by a tunable direct band gap with implications ranging from Si-based light-emitting diodes to lasers and quantum dots for single photon emitters. Here we demonstrate the feasibility of high-quality defect-free and wafer-scale hexagonal Si1–xGex growth with precise control of the alloy composition and layer thickness. This is achieved by transferring the hexagonal phase from a GaP/Si core/shell nanowire template, the same method successfully employed by us to realize hexagonal Si. We determine the optimal growth conditions in order to achieve single-crystalline layer-by-layer Si1–xGex growth in the preferred stoichiometry region. Our results pave the way for exploiting the novel properties of hexagonal Si1–xGex alloys in technological applications. ... Read more