With an increase in the demand for heat energy, and the growing conscience of the world to reduce CO2 emissions, the transition to cleaner energy alternatives has gained momentum. In the Netherlands, the potential for cost-effective geothermal heat extraction from sedimentary aquifers has led to the exploration of siliciclastic Triassic reservoirs in the West Netherlands Basin and Roer Valley Graben for their suitability. This thesis primarily focuses on two geothermal target wells namely NDW-01 and NLW-GT-01. These wells lie in the Nederweert and Westland areas respectively.NDW-01 comprises of 292m thick sandstone package which is scarcely studied. While the NLW-GT-01 well was drilled tapping depths of over 4000 meters and encountering temperatures of about 100°C. In contradiction to the pre-drill expectations of having appreciable porosity and permeability values between 10-500mD, the Upper Volpriehausen sandstones in NLW-GT-01 exhibited porosity and permeabilities ranging between 1.4% to 3.9% and ≤0.02mD respectively. The sandstones were highly compacted and severely cemented by dolomite and quartz. These cements blocked all the macropores leaving no visible porosity in the thin sections. Although, the cored interval was extensively fractured the measured permeability values were negligible. This thesis presents the results of an assessment of the factors leading to the deterioration of intrinsic porosity and permeability of Triassic aquifers lying in the Westland and Nederweert regions. In this project, grain-size analysis using core plugs, thin-section study, petrophysical data analysis, and FMI log interpretation were conducted to understand the depositional environment of the Lower Germanic Trias Group precisely the cored sections of the Nederweert Sandstone Member in NDW-01 well and the Volpriehausen sandstones in NLW-GT-01 borehole. Due to the complex tectonic history coupled with locally different paleoenvironments, the current depths of the Triassic deposits in the investigated area did not correlate with the reservoir quality of the adjacent shallower wells. In addition to the local depositional conditions in the basin, the variable precipitation in the source area, and the distance of sediment transport have defined the rock characteristics. The primary grain-textures, such as roundness, sorting, packing, as well as the detrital framework and authigenic minerals, were found to influence the sandstone porosity. The tightness of the reservoir was due to significant mechanical compaction and cementation described by a diagenetic reconstruction explaining the evolution of porosity with depth with a negligible generation of secondary porosity. The deterioration of the reservoir quality is correlatable to the burial history and its resulting consequences, namely mechanical and chemical compaction endured by the rock during periods of basin subsidence and uplift. These analyses have put the deviation of pre-drill results from those that were obtained through post-drill evaluations into perspective.