RV
R.P. Verlinde
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
2 records found
1
Master thesis
(2019)
-
Ronald Verlinde, Andrei Metrikine, Karel van Dalen, Pim Versteijlen, Apostolos Tsouvalas, Wouter van der Linde
Offshore wind energy is considered a necessary energy resource, that may stimulate the transition from fossil fuels. Following the successful development in Western Europe, offshore wind is quickly gaining momentum in the Asia-Pacific region. At variance with North-Sea based offshore wind turbines (OWTs), structures installed in the Asia-Pacific region are exposed to a high risk of strong earthquakes. To reasonably manage these risks a solid understanding of the physical process of seismic loading is required. Moreover, accurate and effective design procedures to account for this complicated type of loading, need to be developed. Considering that the response of OWTs to earthquakes is affected by the the interaction with the soil, the current thesis is aimed at providing a modelling method to accurately account for the effects of soil-structure interaction in the seismic design of offshore wind turbines. More specifically, the complicated load transferring mechanisms between the soil continuum and the most often applied monopile foundation are addressed. The accuracy of the currently applied design methods is questioned. The uncoupled lateral springs as used in these methods cannot capture the non-local reaction of the soil towards the rigid monopile. Moreover, these methods do not account for the effects of seismic wave diffraction as they use free-field ground motion to introduce the seismic action. For these reasons, the currently applied methods may provide inaccurate estimations of the seismic loads. Hence, more accurate modelling approaches are required. In establishing the modelling method, it is suggested to benefit from the accuracy of a 3D model as it automatically captures the complicated 3D soil-structure interaction mechanisms during earthquake loading. For this reason, a 3D finite element model is provided that simulates the seismic loading of a monopile-supported wind turbine. The 3D modelling approach is however computationally too expensive to replace the simple, 1D models used in the design of offshore wind turbine structures. Therefore, to combine the speed and simplicity of a 1D model with the accuracy of the 3D model, the current thesis presents a method to obtain a 1D effective model that mimics the 3D modelled response. In establishing the effective modelling approach, the 3D model is not only used as a target solution. The 3D model is directly employed to capture the 3D soil continuum reaction and the seismic excitation loads acting on the monopile. These components are incorporated into an effective model by making use of the substructuring method of analysis. To extract the 3D reactions of the soil, the non-local method of Versteijlen \cite{Versteijlen17} is used. The soil stiffness matrices obtained by this method are integrated into a 1D beam model. The ground motion required to introduce the seismic action into this 1D model is determined in a separate step; the ground response analysis. This analysis is performed using a 3D model of the soil subsystem, that incorporates an excavation at the location of the embedded pile. This cavity is included to account for the effects of wave diffraction.\\ To assess, the performance of the provided modelling approach, a comparative study is performed between the 3D soil-structure model and the 1D effective model. This study showed that the 1D pile response closely matches the response of the 3D model - for both horizontal and vertical earthquake motion. Hence, it is proven that the developed design method effectively combines the accuracy of a 3D model with the simplicity of a 1D model.\\ Furthermore, the effective modelling approach is applied to assess the influence of 3D continuum soil-structure interaction effects on the structural response to earthquakes. These analyses indicate that the diffracted component of the seismic wave field does not significantly affect the earthquake excitation load acting on the monopile. As a results, the seismic wave diffraction can safely be neglected. This makes it possible to use free-field ground motion to introduce the seismic action into the effective 1D model. Moreover, the frequency dependent characteristics of the soil are evaluated - which are associated with geometric damping and inertial effects. An initial study on the influence of this soil frequency dependence, showed that the geometric damping results in a considerably reduced structural response for high frequencies. The effect of the soil inertia forces on the response to earthquakes is limited.
...
Offshore wind energy is considered a necessary energy resource, that may stimulate the transition from fossil fuels. Following the successful development in Western Europe, offshore wind is quickly gaining momentum in the Asia-Pacific region. At variance with North-Sea based offshore wind turbines (OWTs), structures installed in the Asia-Pacific region are exposed to a high risk of strong earthquakes. To reasonably manage these risks a solid understanding of the physical process of seismic loading is required. Moreover, accurate and effective design procedures to account for this complicated type of loading, need to be developed. Considering that the response of OWTs to earthquakes is affected by the the interaction with the soil, the current thesis is aimed at providing a modelling method to accurately account for the effects of soil-structure interaction in the seismic design of offshore wind turbines. More specifically, the complicated load transferring mechanisms between the soil continuum and the most often applied monopile foundation are addressed. The accuracy of the currently applied design methods is questioned. The uncoupled lateral springs as used in these methods cannot capture the non-local reaction of the soil towards the rigid monopile. Moreover, these methods do not account for the effects of seismic wave diffraction as they use free-field ground motion to introduce the seismic action. For these reasons, the currently applied methods may provide inaccurate estimations of the seismic loads. Hence, more accurate modelling approaches are required. In establishing the modelling method, it is suggested to benefit from the accuracy of a 3D model as it automatically captures the complicated 3D soil-structure interaction mechanisms during earthquake loading. For this reason, a 3D finite element model is provided that simulates the seismic loading of a monopile-supported wind turbine. The 3D modelling approach is however computationally too expensive to replace the simple, 1D models used in the design of offshore wind turbine structures. Therefore, to combine the speed and simplicity of a 1D model with the accuracy of the 3D model, the current thesis presents a method to obtain a 1D effective model that mimics the 3D modelled response. In establishing the effective modelling approach, the 3D model is not only used as a target solution. The 3D model is directly employed to capture the 3D soil continuum reaction and the seismic excitation loads acting on the monopile. These components are incorporated into an effective model by making use of the substructuring method of analysis. To extract the 3D reactions of the soil, the non-local method of Versteijlen \cite{Versteijlen17} is used. The soil stiffness matrices obtained by this method are integrated into a 1D beam model. The ground motion required to introduce the seismic action into this 1D model is determined in a separate step; the ground response analysis. This analysis is performed using a 3D model of the soil subsystem, that incorporates an excavation at the location of the embedded pile. This cavity is included to account for the effects of wave diffraction.\\ To assess, the performance of the provided modelling approach, a comparative study is performed between the 3D soil-structure model and the 1D effective model. This study showed that the 1D pile response closely matches the response of the 3D model - for both horizontal and vertical earthquake motion. Hence, it is proven that the developed design method effectively combines the accuracy of a 3D model with the simplicity of a 1D model.\\ Furthermore, the effective modelling approach is applied to assess the influence of 3D continuum soil-structure interaction effects on the structural response to earthquakes. These analyses indicate that the diffracted component of the seismic wave field does not significantly affect the earthquake excitation load acting on the monopile. As a results, the seismic wave diffraction can safely be neglected. This makes it possible to use free-field ground motion to introduce the seismic action into the effective 1D model. Moreover, the frequency dependent characteristics of the soil are evaluated - which are associated with geometric damping and inertial effects. An initial study on the influence of this soil frequency dependence, showed that the geometric damping results in a considerably reduced structural response for high frequencies. The effect of the soil inertia forces on the response to earthquakes is limited.
Quidico Bay
Design Proposal for a Fishing Harbour in the bay of Quidico
Student report
(2018)
-
Falko Noortman, Mark Ruessink, Mathijs Mann, Ronald Verlinde, Wouter Sonnema, Lambert Houben, Dominique Ngan-Tillard, Henk Jan Verhagen, Mauricio Pradena Miquel
Quidico is a small town, approximately 200 kilometer south of Concepcion. In the bay adjacent to Quidico town, a great number of local fishermen are active. In the current situation, high waves, a strong current and significant sediment transport hamper the effectiveness of the bay as fishing harbour. Also qualitative onshore facilities to support onshore activities of the fishermen, are absent. The Department of Ports of theMinistry of Public Works, developed a preliminary design proposal, to solve these problems. However, after consultation with the fishermen, this proposal was declared unsatisfactory. Therefore, an additional study is performed to develop a new integral design for the bay of Quidico. The desired design consists of onshore buildings, a paved support area, mooring facilities and breakwaters to create shelter for safe mooring of the fishing boats. Furthermore, these breakwaters shouldmitigate the problems related to sediment transport.
To develop a new breakwater orientation and design, wave data is analysed. Waves coming from the south to south-west are most common, but not guiding due to the sheltering factor of IslandMocha, positioned in front of the coast. The guiding wave, which is coming from the north-west, is implemented in models of Delft3D to see what the new orientation of the breakwater should be. Based on the wave analysis, sediment transport analysis and modelling results, a new breakwater orientation is determined, that fulfills all requirements prescribed by the DoP. After defining this new orientation, the influence of the breakwater on sediment and waves is analysed. Due to the new orientation, a new design of the breakwater is made.
The fishing harbour should offer the possibility for the fisherman to unload their goods and berth safely. The DoP proposed the construction of a mooring facility along the south-west shoreline of Quidico Bay. Two types of quay walls for the mooring facilities are proposed, a sheet pile wall and a concrete mass wall. For both types a preliminary design is developed, by making use of the 2D finite element software PLAXIS and hand calculations. The preferred mooring facility design mainly depends on the soil conditions at the specific location. From the boundary conditions it is concluded the bedrock is found at a depth of 60m, the soil above mainly consists of sand. Therefore the construction a sheet pile wall to serve as mooring facility, is recommended.
In the initial design of the Department of Ports, six separate masonry buildings are proposed to accommodate the desired supporting facilities. These buildings cover a large area of the bay and will require a large paved supporting platform. To reduce this paved area, the DoP is interested in a more compact design, that includes all supporting facilities in one multi-storey building. In consultation with the DoP two different designs are developed; a three-storey steel building and a two-storey concrete building. A structural design is developed within the boundaries set by the functional design requirements. Next, a structural analysis is performed by making use of finite element software (ETABS) and a final design is obtained for both buildings. The concrete building is concluded to be the most suitable option for the DoP.
Quick offloading of the boats and smooth transshipment of goods is hindered due to the lack of a good support area and access road. The DoP proposed a design for both pavements in the their preliminary study, but it was requested to evaluate different alternatives. Three different pavement technologies are proposed for the access road: surface treatment, asphalt and concrete slabs. For the pavement in the support area concrete slabs are the preferred solution. To achieve an optimal pavement design that fulfills all structural and serviceability requirements throughout the full design life, slab pavements with different dimensions and thicknesses are evaluated. In conclusion, short concrete slabs are the preferred pavement for both areas. Short slab pavement is an upcoming technology that has great advantages in terms of structural performance and costs.
...
To develop a new breakwater orientation and design, wave data is analysed. Waves coming from the south to south-west are most common, but not guiding due to the sheltering factor of IslandMocha, positioned in front of the coast. The guiding wave, which is coming from the north-west, is implemented in models of Delft3D to see what the new orientation of the breakwater should be. Based on the wave analysis, sediment transport analysis and modelling results, a new breakwater orientation is determined, that fulfills all requirements prescribed by the DoP. After defining this new orientation, the influence of the breakwater on sediment and waves is analysed. Due to the new orientation, a new design of the breakwater is made.
The fishing harbour should offer the possibility for the fisherman to unload their goods and berth safely. The DoP proposed the construction of a mooring facility along the south-west shoreline of Quidico Bay. Two types of quay walls for the mooring facilities are proposed, a sheet pile wall and a concrete mass wall. For both types a preliminary design is developed, by making use of the 2D finite element software PLAXIS and hand calculations. The preferred mooring facility design mainly depends on the soil conditions at the specific location. From the boundary conditions it is concluded the bedrock is found at a depth of 60m, the soil above mainly consists of sand. Therefore the construction a sheet pile wall to serve as mooring facility, is recommended.
In the initial design of the Department of Ports, six separate masonry buildings are proposed to accommodate the desired supporting facilities. These buildings cover a large area of the bay and will require a large paved supporting platform. To reduce this paved area, the DoP is interested in a more compact design, that includes all supporting facilities in one multi-storey building. In consultation with the DoP two different designs are developed; a three-storey steel building and a two-storey concrete building. A structural design is developed within the boundaries set by the functional design requirements. Next, a structural analysis is performed by making use of finite element software (ETABS) and a final design is obtained for both buildings. The concrete building is concluded to be the most suitable option for the DoP.
Quick offloading of the boats and smooth transshipment of goods is hindered due to the lack of a good support area and access road. The DoP proposed a design for both pavements in the their preliminary study, but it was requested to evaluate different alternatives. Three different pavement technologies are proposed for the access road: surface treatment, asphalt and concrete slabs. For the pavement in the support area concrete slabs are the preferred solution. To achieve an optimal pavement design that fulfills all structural and serviceability requirements throughout the full design life, slab pavements with different dimensions and thicknesses are evaluated. In conclusion, short concrete slabs are the preferred pavement for both areas. Short slab pavement is an upcoming technology that has great advantages in terms of structural performance and costs.
...
Quidico is a small town, approximately 200 kilometer south of Concepcion. In the bay adjacent to Quidico town, a great number of local fishermen are active. In the current situation, high waves, a strong current and significant sediment transport hamper the effectiveness of the bay as fishing harbour. Also qualitative onshore facilities to support onshore activities of the fishermen, are absent. The Department of Ports of theMinistry of Public Works, developed a preliminary design proposal, to solve these problems. However, after consultation with the fishermen, this proposal was declared unsatisfactory. Therefore, an additional study is performed to develop a new integral design for the bay of Quidico. The desired design consists of onshore buildings, a paved support area, mooring facilities and breakwaters to create shelter for safe mooring of the fishing boats. Furthermore, these breakwaters shouldmitigate the problems related to sediment transport.
To develop a new breakwater orientation and design, wave data is analysed. Waves coming from the south to south-west are most common, but not guiding due to the sheltering factor of IslandMocha, positioned in front of the coast. The guiding wave, which is coming from the north-west, is implemented in models of Delft3D to see what the new orientation of the breakwater should be. Based on the wave analysis, sediment transport analysis and modelling results, a new breakwater orientation is determined, that fulfills all requirements prescribed by the DoP. After defining this new orientation, the influence of the breakwater on sediment and waves is analysed. Due to the new orientation, a new design of the breakwater is made.
The fishing harbour should offer the possibility for the fisherman to unload their goods and berth safely. The DoP proposed the construction of a mooring facility along the south-west shoreline of Quidico Bay. Two types of quay walls for the mooring facilities are proposed, a sheet pile wall and a concrete mass wall. For both types a preliminary design is developed, by making use of the 2D finite element software PLAXIS and hand calculations. The preferred mooring facility design mainly depends on the soil conditions at the specific location. From the boundary conditions it is concluded the bedrock is found at a depth of 60m, the soil above mainly consists of sand. Therefore the construction a sheet pile wall to serve as mooring facility, is recommended.
In the initial design of the Department of Ports, six separate masonry buildings are proposed to accommodate the desired supporting facilities. These buildings cover a large area of the bay and will require a large paved supporting platform. To reduce this paved area, the DoP is interested in a more compact design, that includes all supporting facilities in one multi-storey building. In consultation with the DoP two different designs are developed; a three-storey steel building and a two-storey concrete building. A structural design is developed within the boundaries set by the functional design requirements. Next, a structural analysis is performed by making use of finite element software (ETABS) and a final design is obtained for both buildings. The concrete building is concluded to be the most suitable option for the DoP.
Quick offloading of the boats and smooth transshipment of goods is hindered due to the lack of a good support area and access road. The DoP proposed a design for both pavements in the their preliminary study, but it was requested to evaluate different alternatives. Three different pavement technologies are proposed for the access road: surface treatment, asphalt and concrete slabs. For the pavement in the support area concrete slabs are the preferred solution. To achieve an optimal pavement design that fulfills all structural and serviceability requirements throughout the full design life, slab pavements with different dimensions and thicknesses are evaluated. In conclusion, short concrete slabs are the preferred pavement for both areas. Short slab pavement is an upcoming technology that has great advantages in terms of structural performance and costs.
To develop a new breakwater orientation and design, wave data is analysed. Waves coming from the south to south-west are most common, but not guiding due to the sheltering factor of IslandMocha, positioned in front of the coast. The guiding wave, which is coming from the north-west, is implemented in models of Delft3D to see what the new orientation of the breakwater should be. Based on the wave analysis, sediment transport analysis and modelling results, a new breakwater orientation is determined, that fulfills all requirements prescribed by the DoP. After defining this new orientation, the influence of the breakwater on sediment and waves is analysed. Due to the new orientation, a new design of the breakwater is made.
The fishing harbour should offer the possibility for the fisherman to unload their goods and berth safely. The DoP proposed the construction of a mooring facility along the south-west shoreline of Quidico Bay. Two types of quay walls for the mooring facilities are proposed, a sheet pile wall and a concrete mass wall. For both types a preliminary design is developed, by making use of the 2D finite element software PLAXIS and hand calculations. The preferred mooring facility design mainly depends on the soil conditions at the specific location. From the boundary conditions it is concluded the bedrock is found at a depth of 60m, the soil above mainly consists of sand. Therefore the construction a sheet pile wall to serve as mooring facility, is recommended.
In the initial design of the Department of Ports, six separate masonry buildings are proposed to accommodate the desired supporting facilities. These buildings cover a large area of the bay and will require a large paved supporting platform. To reduce this paved area, the DoP is interested in a more compact design, that includes all supporting facilities in one multi-storey building. In consultation with the DoP two different designs are developed; a three-storey steel building and a two-storey concrete building. A structural design is developed within the boundaries set by the functional design requirements. Next, a structural analysis is performed by making use of finite element software (ETABS) and a final design is obtained for both buildings. The concrete building is concluded to be the most suitable option for the DoP.
Quick offloading of the boats and smooth transshipment of goods is hindered due to the lack of a good support area and access road. The DoP proposed a design for both pavements in the their preliminary study, but it was requested to evaluate different alternatives. Three different pavement technologies are proposed for the access road: surface treatment, asphalt and concrete slabs. For the pavement in the support area concrete slabs are the preferred solution. To achieve an optimal pavement design that fulfills all structural and serviceability requirements throughout the full design life, slab pavements with different dimensions and thicknesses are evaluated. In conclusion, short concrete slabs are the preferred pavement for both areas. Short slab pavement is an upcoming technology that has great advantages in terms of structural performance and costs.