This study presents an experimental dataset documenting the evolution of a turbulent boundary layer downstream of a rough-to-smooth surface transition. To investigate the effect of upstream flow conditions, two groups of experiments are conducted. For the Group-Re cases, a nominally constant viscous-scaled equivalent sand grain roughness is maintained on the rough surface, while the friction Reynolds number ranges from 7100 to 21 000. For the Group-ks cases, is maintained while ranges from 111 to 228. The wall-shear stress on the downstream smooth surface is measured directly using oil-film interferometry to redress previously reported uncertainties in the skin-friction coefficient recovery trends. In the early development following the roughness transition, the flow in the internal layer is not in equilibrium with the wall-shear stress. This conflicts with the common practise of modelling the mean velocity profile as two log laws below and above the internal layer height, as first proposed by Elliott (Trans. Am. Geophys. Union, vol. 39, 1958, pp. 1048-1054). As a solution to this, the current data are used to model the recovering mean velocity semi-empirically by blending the corresponding rough-wall and smooth-wall profiles. The over-energised large-scale motions leave a strong footprint in the near-wall region of the energy spectrum, the frequency and magnitude of which exhibit dependence on and, respectively. The energy distribution in near-wall small scales is mostly unaffected by the presence of the outer flow with rough-wall characteristics, which can be used as a surrogate measure to extract the local friction velocity.@en

In this study, we develop an analytical model to predict the turbulent boundary layer downstream of a step-change in the surface roughness where upstream flow conditions are given. We first revisit the classical model of Elliott (Trans. Am. Geophys. Union, vol. 39, 1958, pp. 1048-1054), who modelled the velocity distribution within and above the internal layer with a simple piecewise logarithmic profile, and evolved the velocity profile using the streamwise momentum equation. Elliott's model was originally developed for an atmospheric surface layer, and to make the model applicable to a spatially developing turbulent boundary layer with finite thickness, we propose a number of more physical refinements, including adding a wake function to the velocity profile, considering the growth of the entire boundary layer in the streamwise direction, and using a more realistic shear stress profile in the momentum equation. In particular, we implement the blending model (Li et al., J. Fluid Mech., vol. 923, 2021, p. A18) to account for the deviation of the mean flow within the internal layer from a canonical velocity profile based on the local wall condition. These refinements lead to improved agreement between the prediction and the measurement, especially in the vicinity of the rough-to-smooth change.@en