SG

Siti Nur Ainsyah Ghani

info

Please Note

2 records found

Journal article (2022) - S. N.A. Ghani, Hooman Yarmand, N. F.M. Noor
Heat flux enhancement resulting from utilization of variant graphene-based nanoparticles; graphenes, graphene nanoplatelets, graphene oxides (GOs), carbon nanotubes (CNTs which include single and multiple walled CNTs) in a water-base fluid is focussed in the present study. A steady, laminar, incompressible, mixed convective and reversed stagnation point flow together with the consideration of transverse magnetic field over varying angles of an inclined permeable cylinder is analyzed for the heterogeneous nanofluids. The governing partial differential equations based on Tiwari-Das model are reformulated into nonlinear ordinary differential equations by applying similarity expressions. A shooting procedure is opted to reformulate the equations into boundary value problems which are solved by employing a numerical finite difference code utilizing three-stage Lobatto IIIa formula in MATLAB. The effects of constructive parameters toward the model on non-dimensional velocity and temperature disseminations, reduced skin friction coefficient and reduced Nusselt number are graphically reported and discussed in details. It is observed that GOs-water has the lowest heat flux performance under increasing values of wall permeability parameter, curvature parameter and nanoparticle volume fraction as compared to other nanofluids. On contrary, our results demonstrate that graphenes-water has the highest heat flux performance as compared to SWCNTs-water across many emerging parameters considered in this study. ...
Journal article (2021) - Siti Nur Ainsyah Ghani, Hooman Yarmand, Noor Fadiya Mohd Noor
Heat flux enhancement due to utilization of graphene, graphene nanoplatelets, and graphene oxides in water/ethylene-glycol based nanofluids over an inclined permeable cylinder is focused in the present study. The governing PDE are reformulated into non-linear ODE by applying similarity expressions. A shooting procedure is opted to reformulate the equations into boundary value problems which are solved by employing a numerical finite difference code in MATLAB. The effects of constructive parameters toward the model on non-dimensional velocity and temperature dissemination, reduced skin friction coefficient and reduced Nusselt number are graphically reported and discussed in details. It is observed that by increasing the thermal stratification and inclination angle, the temperature profile and Nusselt number for the selected nanofluids will be decreased. ...