The importance of comfort during transfer and stationing becomes a key performance parameter for large yacht design, on the same level as propulsive issues. Such a matter extends questions in terms of form and service demand to the motion behaviour of the unit in waves. Relevant studies refer to outdated hull forms not specific to modern large yachts. In this study, five hull forms with different bow concepts represent the most common design solutions for yachts at constant draught and displacement. The preliminary ranking on the effect of alternative bows on comfort requires the definition of internationally accepted comfort standards. Here, the AWI 22834 guidelines for large yachts provide the service and environmental conditions and criteria for the comfort analysis, being the only reference specific to yachts. The calculations employ a strip-theory-based numerical model to provide results of easy understanding for designers during the early design stage. The obtained ranking among the design solutions on a reference large yacht favours the option nested with a bulb, contradicting the expectations in favour of a vertical bow concept. The discussion and conclusions provide a way forward for additional analyses and investigations aimed at proposing suitable multicriterial design guidelines for large yachts. However, the results also show the unsuitability of AWI environmental and encounter conditions for hull form ranking.

The Dynamic Positioning system allows a vessel to keep a precise position and heading during stationing operations in a rough sea by using onboard actuators only. During the design phase, it is mandatory to identify the capability of the system actuators to counteract the environmental forces. Conventional predictions are limited to the estimation of a maximum sustainable wind speed on predefined encounter angles by estimating the corresponding wave parameters with questionable standard deterministic correlations. The proposed approach aims at determining the dynamic positioning performances by using site-specific long-term environmental conditions which are modelled with joint distributions of wind and wave parameters. To this end, the operability of the dynamic positioning system is evaluated as a non-deterministic multidimensional Monte Carlo integration process, based on the sampling of environmental joint distributions. For each environmental condition, a quasi-static dynamic positioning analysis is performed solving the equilibrium between external forces and the vessel's actuators through a non-linear thrust allocation algorithm. The proposed methodology is applied to a reference offshore ship in five different operative geographic areas, highlighting the suitability of the calculation methodology for site-specific operability predictions.

Installation of jacket platforms requires simultaneous and combined operations of multiple assets. When the whole process has to be planned, it is necessary to predict in a fast and reliable way the possible weather limitations that may occur during the operations. The paper will present the major challenges of this unusual and innovative Dynamic Positioning analysis which has been carried out for Ana Jacket installation. The obtained results show that the Dynamic Positioning system of the core vessel in intact configuration is capable to hold the position for the investigated vessels' arrangements and design operative weather conditions. Lifting, upending and installation of Ana Jacket were carried out successfully in 2021.

Determining Dynamic Positioning capability for an offshore vessel is mandatory to identify the environmental forces the system can counteract, together with the operability in a specific operational area of interest. Conventional predictions evaluate the capability as a maximum sustainable wind speed at a predefined encounter angle for a given wind–wave correlation, not reflecting the effective wind and waves occurrence at the site. In this respect, a step forward is provided by the scatter diagram approach, allowing the evaluation of operability in a specific sea area, using a simplified method to predict wind speed from wave parameters. Here, using known wind–waves joint distributions for the long-term environmental conditions further improves the scatter diagram approach, assessing the operability of a Dynamic Positioning system through a Quasi-Monte Carlo sampling of the joint distribution. Analysing the results of the Quasi-Monte Carlo process, it is possible to obtain a site-specific capability plot, allowing the identification of critical wind speeds in a way that is familiar to operators in the offshore industry. The application of this novel method in the case of quasi-static calculations both to a reference supply vessel and a pipe-lay vessel shows the flexibility of the proposed approach for site-specific Dynamic Positioning capability predictions.