Effect of extrusion speed on the surface quality of an aluminium composite profile.

Verification of performance of numerical simulation of the powder injection moulding process based on properties of the BASF 316L feedstock.

Specific heat of metal powder - polymer feedstock for powder injection moulding.

Processing of in-situ Al-TiB2 composites.

Study on the characteristics of the diffusion between the as-reaction-formed Ni3Al intermetallic compound and pure nickel for interfacial bonding.

In-situ reactive synthesis of the Ni3Al intermetallic compound and subsequent bonding with different steels for surface coating.

3D FEM simulation of the thermal events during AA6061 aluminium extrusion.

Multimaterial tooling for extrusion.

Ageing response of an AA2014-based composite prepared from an elemental powder mixture.

The characteristics of the processing and performance of the Al-4.5Cu-SiC composites added with graphite and prepared from elemental powders.

Thermal conductivity of metal powder - polymer plastisol.

Preparation of Al-20Si-4.5Cu alloy and its composite from elemental powders.

Experimenten snelle koeling van keramische gietschalen.

Electroless NiP composite coatings on aluminium: Substrate pretreatment.

Hydrogen pick-up on NiP composites.

Powder injection moulding of the BASF 316L feedstock - Numerical simulation and experimental verification of the process.

The use of a reactive diluent in the synthesis metal matrix composites.

Novel tooling concept and process simulation for bulky PIM parts - Highlights.

Electroless Ni-P composite coatings: the effect of heat treatment on the microhardness of substrate and coating.

The choice of the initial form of delta-Al2O3 short fibers to reinforce the Al-4.5Cu alloy prepared from elemental powders.