Multimaterial tooling for extrusion.

Multimaterial tooling for extrusion. Six-monthly report.

Processing of in-situ Al-TiB2 composites.

Ageing response of an AA2014-based composite prepared from an elemental powder mixture.

Hydrogen pick-up on NiP composites.

The effect of manufacturing parameters on wear resistance of Al-based composites produced via powder metallurgy.

The characteristics of the processing and performance of the Al-4.5Cu-SiC composites added with graphite and prepared from elemental powders.

The use of a reactive diluent in the synthesis metal matrix composites.

Specific heat of metal powder - polymer feedstock for powder injection moulding.

Full dense processing of in-situ aluminium based MMCs.

The choice of the initial form of delta-Al2O3 short fibers to reinforce the Al-4.5Cu alloy prepared from elemental powders.

An FEM analysis of the mechanical and physical response of aluminium in extrusion.

Prevention of stick-slip tearing of a Duralcan AA6061-matrix composite during extrusion.

Impact of thermal treatment on microhardness of electroless NiP composite coatings on aluminium.

Determination of temperature evolution during the extrusion of AA6061 alloy using 3D FEM modelling.

Study on the characteristics of the diffusion between the as-reaction-formed Ni3Al intermetallic compound and pure nickel for interfacial bonding.

Influence of particle type and morphology on codeposition process by electroless nickel.

Novel tooling concept and process simulation for bulky PIM parts - Highlights.

Poederspuitgieten en kunststof.

Preparation of Al-20Si-4.5Cu alloy and its composite from elemental powders.