Assuming that the equilibrium geometry of river channels does not depend on their initial state but solely on boundary conditions, several formulas have been derived that relate the channel depth and width to the river bankfull discharge and bed material. However, due to the existence of a threshold for sediment motion and the strong non-linearity between sediment transport and flow rate, this assumption might not be generally valid for gravel-bed rivers. This research clarifies the role of the initial conditions, more specifically the initial channel width, on the geometry of gravel-bed rivers considering a variety of boundary conditions. The approach includes laboratory experiments and two-dimensional modeling, reproducing the evolution of alluvial channels with different starting widths, discharge regimes and sediment input rates. The experiments represent the Arc River (France). Thus, the characteristics of this river were used in the numerical model to obtain a realistic virtual case complementing the experiments. Different boundary and starting conditions resulted in either braided or single-thread channels. We found that the initial width strongly influences the evolution process and leaves a footprint on the river braid-belt extension. The active width of braided systems and the width of single-thread channels do not depend on the starting condition. They depend on sediment input rather than on discharge variability. Different initial widths result in different final bed levels. This indicates that the initial channel width may affect the degree of channel incision or aggradation. The results of this study justify the use of equilibrium formulas for single-thread rivers.@en

The effects of sediment heterogeneity and sediment mobility on the morphology of braided rivers are still poorly studied, especially when the partial sediment mobility occurs. Nevertheless, increasing the bed sediment heterogeneity by coarse sediment supply is becoming a common practice in river restoration projects and habitat improvement all over the world. This research provides a step forward in the identification of the effects of sediment sorting on the evolution of sediment bars and braiding geometry of gravel-bed rivers. A two-dimensional morphodynamic model was used to simulate the long-term developments of a hypothetical braided system with discharge regime and morphodynamic parameters derived from the Waimakariri River, New Zealand. Several scenarios, differing in bed sediment heterogeneity and sediment mobility, were considered. The results agree with the tendencies already identified in linear analyses and experimental studies, showing that a larger sediment heterogeneity increases the braiding indes and reduces the bars length and height. The analyses allowed identifying the applicability limits of uniform sediment and variable discharge modelling approaches.@en