The protection of distribution networks is one of the most substantial issues, which needs special attention. Using appropriate protective equipment enhances the safety of the power distribution network during the fault conditions. Fault current limiter (FCL) is a kind of modern preserving system being used for protecting power networks and equipment. One of the main concerns of power networks is the voltage restoration of buses during faulty conditions. In this study, a group of coordinated DC reactor type faults current limiters are designed and tested to protect the network and restore its buses voltage within the fault period. To coordinate FCLs and measurement devices during the fault sequences, a wireless communication system and decision-making computer are used. The proposed FCLs coordination strategy is modelled and simulated in MATLAB platform and the results are validated by the developed laboratory test setup.@en

Power systems are subjected to various types of faults as well as ferroresonance overvoltages. These results in the interruption of the normal operation of the power grid, failure of equipment, electrical fires, etc. To tackle these issues, this study proposes a dual function limiter to control the fault current and ferroresonance phenomenon in power systems. This compound device is a solid-state series transformer-based limiter that includes IGBT switches, capacitors, rectifiers, and a DC reactor. During the grid normal operation, the proposed limiter is not active and therefore is invisible and it operates in the instant of fault inception or ferroresonance overvoltage occurrences. Analytical studies in all operation modes are presented and assessments on the performance of the proposed ferroresonance and fault current limiter (FFCL) are conducted in Matlab. Simulation results confirm the reported analytical studies and FFCL's performance.@en