Integrating porous materials into the structure of an airfoil constitutes a promising passive strategy for mitigating the noise from turbulence-body interactions that has been extensively explored in the past few decades. When a compact permeable body is considered in the aeroacoustic analogy derived by Curle to predict this noise source, a dipole associated with the nonzero unsteady Reynolds stresses appears on the surface in addition to the dipole linked to the pressure fluctuations. Nevertheless, the relative contribution of this source on the far-field noise radiated by a porous wing profile has not been clarified yet. The purpose of the current research work is twofold. On the one hand, it investigates the impact of porosity on the surface-pressure fluctuations of a thick airfoil immersed in the wake of an upstream circular rod at a Mach number of 0.09. On the other hand, it quantifies the relevance of the Reynolds-stresses term on the surface as a sound-generation mechanism. Results from large-eddy simulations show that the porous treatment of the wing profile yields an attenuation of the unsteady-pressure peak, which is localized in the low-frequency range of the spectrum and is induced by the milder distortion of the incoming vortices. However, porosity is ineffective in breaking the spanwise coherence or in-phase behavior of the surface-pressure fluctuations at the vortex-shedding frequency. The Reynolds-stresses term is found to be considerable in the stagnation region of the airfoil, where the transpiration velocity is larger, and partly correlated with the unsteady surface pressure. This results in a nonnegligible contribution of this term to the far-field acoustic pressure emitted by the porous wing profile for observation angles near the stagnation streamline. The conclusions drawn in the present study eventually provide valuable insight into the design of innovative and efficient passive strategies to mitigate surface-turbulence interaction noise in industrial applications.@en

The distortion of homogeneous isotropic turbulence interacting with a porous cylinder is calculated by means of the Rapid Distortion Theory (RDT). The porous treatment, characterised by a constant static permeability, is modelled as an impedance boundary condition accounting for the Darcy’s flow within the body. The RDT algorithm is first validated through comparisons with published velocity measurements in the stagnation region of an impermeable cylinder placed downstream of a turbulence grid. Subsequently, the impact of porosity on the velocity field is investigated through the analysis of the one-dimensional spectra at different locations near the body and the velocity variance along the stagnation streamline. The porous surface affects the incoming turbulence distortion near the cylinder by reducing the blocking effect of the body and by altering the vorticity deformation caused by the mean flow. The former leads to an attenuation of the one-dimensional velocity spectrum in the low-frequency range, whereas the latter results in an amplification of the high-frequency components. This trend is found to be strongly dependent on the turbulence scale and influences the evolution of the velocity fluctuations in the stagnation region. The porous RDT is finally adapted to model the turbulence distortion in the vicinity of the leading edge of a NACA-0024 profile fitted with melamine foam. The good agreement between the calculations and the experimental results demonstrates that the present methodology can improve the understanding of the physical mechanisms involved in the aerofoil-turbulence interaction noise reduction through porosity and be instrumental in designing such passive noise-mitigation treatments.@en

An automotive cooling module working at three different operating conditions is investigated using a microphone array method. Experiments on an open rotor and on a full module configurations were conducted in the ALCOVES anechoic chamber of the von Karman Institute for Fluid Dynamics, Belgium. The acoustic data are post-processed using the ROtating Source Identifier algorithm. As first step, the method was applied for the fan-alone configuration at the nominal operating point. The sound maps of one-third octave band are discussed with respect to the minimum resolving frequency emerging by the Rayleigh criterion. Integrated spectra of the whole beamforming maps are used to validate the method whereas acoustic characteristics of the fan are identified by evaluating integrated spectra of each blade separately. Subsequently, the ROSI method was applied to both configurations, demonstrating the acoustic transparency of the automotive heat exchanger. Depending on the adjusted mass flow rate, sound sources are located on the leading or trailing edges of the fan blades. To complement the analysis, sound directivity measurements have been carried out in the anechoic wind tunnel at the University of Sherbrooke, Canada, on an another sample of the same engine cooling module.

@en

A possible strategy for the reduction of the aeroacoustic noise generated by turbulence interacting with a wing profile, also referred to as leading-edge noise, is represented by the implementation of a porous medium in the structure of the airfoil. However, the physical mechanisms involved in this noise mitigation technique remain unclear. The present work aims at elucidating these phenomena and particularly how the porosity affects the incoming turbulence characteristics in the immediate vicinity of the surface. A porous NACA-0024 profile equipped with melamine foam has been compared with a solid baseline, both airfoils being in turn subjected to the turbulence shed by an upstream circular rod. The mean wall-pressure distribution along the airfoils shows that the implementation of the porous material mostly preserves the integrity of the NACA-0024 profile's shape. Results of hot-wire anemometry and large-eddy simulations indicate that the porous design proposed in this study allows for a damping of the velocity fluctuations and it has a limited influence on the upstream mean flow field. Specifically, the upwash component of the root-mean-square of the velocity fluctuations turns out to be significantly attenuated in the porous case in contrast to the solid one, leading to a strong decrease of the turbulent kinetic energy in the stagnation region. Furthermore, the comparison between the power spectral densities of the incident turbulent velocities demonstrates that the porosity has an effect mainly on the low-frequency range of the turbulent velocity power spectrum. This evidence is in line with the results of the acoustic beamforming measurements, which exhibit a noise abatement in an analogous frequency range. On the basis of these observations, an interpretation of the phenomena occurring in the turbulence-interaction noise reduction due to a porous treatment of the airfoil is finally given with reference to the theoretical inputs of the Rapid Distortion Theory.

@en

Two-point velocity statistics near the trailing edge of a controlled diffusion airfoil are obtained, both experimentally and analytically, by decomposing Poisson's equation for pressure into the mean-shear (MS) and turbulence-turbulence (TT) interaction terms. The study focuses on the modeling of each interaction term, in order to allow for the reconstruction of the wall-pressure spectra from tomographic velocimetry data, without numerically solving for pressure. The two-point correlation of the wall-normal velocity that describes the magnitude of the MS source term is found to be influenced by various competing factors such as blocking, mean-shear, and the adverse mean pressure gradient. The blocking term is found to supersede the other interaction terms close to the wall, making the two-point velocity correlation self-similar. The most dominant TT term that contributes to far-field noise for an observer located perpendicular to the airfoil chord at the mid-span is shown to be the one that quantifies the variation of the wall-normal velocity fluctuations in the longitudinal direction because of the statistical homogeneity of turbulence in planes parallel to the wall. A model to determine the contribution of the TT interaction term is proposed where the fourth-order two-point correlation can be modeled using Lighthill's approximation. However, its contribution toward wall-pressure spectra is found to be substantially lower than the MS term in the present case.

@en