The existing model-based control strategies for tendon-driven continuum soft robots neglect the dynamics of the actuation system. Nevertheless, such dynamics have an important impact on the closed-loop performance. This work analyzes the influence of the actuation dynamics in tendon-driven continuum soft robots performing trajectory-tracking tasks. To this end, we use singular perturbation (SP) theory to design controllers that account for such dynamics. We provide the analytical formulation of the SP controllers and their in-depth experimental validation. Additionally, we use high-and low-stiffness tendons to experimentally compare the performance of the proposed SP controllers against traditional feedback control schemes that disregard the actuation dynamics. The experimental results show that SP controllers outperform the approaches that neglect the actuation dynamics by reducing oscillations and achieving lower errors without relying on high gains. Furthermore, it is shown that neglecting the actuation dynamics may lead to instability when the tendons have a low stiffness coefficient.

Fully exploiting soft robots' capabilities requires devising strategies that can accurately control their movements with the limited amount of control sources available. This task is challenging for reasons including the hard-to-model dynamics, the system's underactuation, and the need of using a prominent feedforward control action to preserve the soft and safe robot behavior. To tackle this challenge, this letter proposes a purely feedforward iterative learning control algorithm that refines the torque action by leveraging both the knowledge of the model and data obtained from past experience. After presenting a 3D polynomial description of soft robots, we study their intrinsic properties, e.g., input-to-state stability, and we prove the convergence of the controller coping with locally Lipschitz nonlinearities. Finally, we validate the proposed approach through simulations and experiments involving multiple systems, trajectories, and in the case of external disturbances and model mismatches.