This paper presents a new design of a planar solar concentrator with spectral splitting of light for space applications. This concentrator spectrally splits the incident light into mainly two parts. Each part is then focused onto specific spatially separated photovoltaic cells allowing for independent control of respective cells' output power. These advantages of both spectral splitting and light focusing are combined here because of a specific diffraction grating superimposed on a Fresnel lens. The theoretical principle of the optical design is presented with optimization of each element and improvement steps including optimization of grating period evolution along the lens and testing of two kinds of gratings (a blazed and a lamellar one). First numerical results are presented highlighting the possibility to design a concentrator at about 10× or more for each cell with an output power larger than that of a classical concentrator focusing on a GaAs single junction cell and less than 10% of losses for tracking errors up to ±0.8°. Some experimental results are also presented.

This paper presents recent improvements of our new solar concentrator design for space application. The concentrator is based on a combination of a diffraction grating (blazed or lamellar) coupled with a Fresnel lens. Thanks to this diffractive/refractive combination, this optical element splits spatially and spectrally the light and focus approximately respectively visible light and IR light onto electrically independent specific cells. It avoid the use of MJs cells and then also their limitations like current matching and lattice matching conditions, leading theoretically to a more tolerant system. The concept is reminded, with recent optimizations, ideal and more realistic results, and the description of an experimental realization highlighting the feasibility of the concept and the closeness of theoretical and experimental results.

This experimental study was carried out within the context of high concentration photovoltaics. The paper presents the results of an experimental investigation relating to the quantification of the impacts of the chromatic effect on the performance of a double junction GaInP/GaAs solar cell. Chromatic effects are the result of material dispersion caused by the refractive optics component. This study aims to evaluate the effect of the spectral modification of the incident beam on the whole solar concentrator system performance. Such considerations are fundamental in producing a highly accurate design, with which to achieve the best possible system performance. Efficiency is evaluated within the vicinity of the focus of a Fresnel lens designed for concentration. On the optical axis, rays with different wavelengths are not focalized at the same points. The spectral content of the beam depends, therefore, upon the position of the cell along the optical axis. It is assumed that spectral content modification may have an impact on cell performance and, as a consequence, on system efficiency as a whole. Efficiency of the optical Fresnel lens and of the cell were evaluated in relation to spectral content modification.

A primary optics for solar concentrator made of an achromatic Fresnel doublet has been designed and manufactured. The achromatic Fresnel doublet combines the advantages of plastic lenses without being affected by chromatic aberrations. The performance has been determined experimentally using a homemade continuous solar simulator and compared to paraxial theory and ray-tracing simulations. Experimental results are in good agreement with theory and show that the achromatic Fresnel doublet is tolerant to manufacturing errors and uncertainty on the dispersion of the refractive index: the concentration factor remains above 1600× with an f-number of 2.

To combine achromatic system with cost-effective technology, we propose the use or hybride (refractive/diffractive) and refractive doublets Fresnel lenses. These two technologies have been compared experimentally from an optical point of view.

The linear chromatic aberration (LCA) of several combinations of polycarbonates (PCs) and poly (methyl methacrylates) (PMMAs) as singlet, hybrid (refractive/diffractive) lenses and doublets operating with wavelengths between 380 and 1600 nm – corresponding to a typical zone of interest of concentrated photovoltaics (CPV) – are compared. Those comparisons show that the maximum theoretical concentration factor for singlets is limited to about 1000 × at normal incidence and that hybrid lenses and refractive doublets present a smaller LCA increasing the concentration factor up to 5000 × and 2 × 10⁶ respectively. A new achromatization equation more useful than the Abbé equation is also presented. Finally we determined the ideal position of the focal point as a function of the LCA and the geometric concentration which maximizes the flux on the solar cell.