The performance (paraxial phase delay) of conventional diffractive optical elements is generally analyzed using the analytical scalar theory of diffraction, based on thin-element approximation (TEA). However, the high thickness of multilayer diffractive optical elements (MLDOEs) means that TEA yields inaccurate results. To address this, we tested a method based on ray-tracing simulations in mid-wave and long-wave infrared wave bands and for multiple f -numbers, together with the effect of MLDOE phase delay on a collimated on-axis beam with an angular spectrum method. Thus, we accurately generate optical figures of merit (point spread function along the optical axis, Strehl ratio at the "best"focal plane, and chromatic focal shift) and, by using a finite-difference timedomain method as a reference solution, demonstrate it as a valuable tool to describe and quantify the longitudinal chromatic aberration ofMLDOEs.

This experimental study was carried out within the context of high concentration photovoltaics. The paper presents the results of an experimental investigation relating to the quantification of the impacts of the chromatic effect on the performance of a double junction GaInP/GaAs solar cell. Chromatic effects are the result of material dispersion caused by the refractive optics component. This study aims to evaluate the effect of the spectral modification of the incident beam on the whole solar concentrator system performance. Such considerations are fundamental in producing a highly accurate design, with which to achieve the best possible system performance. Efficiency is evaluated within the vicinity of the focus of a Fresnel lens designed for concentration. On the optical axis, rays with different wavelengths are not focalized at the same points. The spectral content of the beam depends, therefore, upon the position of the cell along the optical axis. It is assumed that spectral content modification may have an impact on cell performance and, as a consequence, on system efficiency as a whole. Efficiency of the optical Fresnel lens and of the cell were evaluated in relation to spectral content modification.

One of the most critical units of nulling interferometers is the Achromatic Phase Shifter. The concept we propose here is based on optimized Fresnel rhombs, using the total internal reflection phenomenon, modulated or not. The total internal reflection induces a phase shift between the polarization components of the incident light. We present the principles, the current status of the prototype manufacturing and testing operations, as well as preliminary experiments on a ZnSe Fresnel rhomb in the visible that have led to a first error source assessment study. Thanks to these first experimental results using a simple Polarimeter arrangement, we have identified the bulk scattering as being the main error source. Fortunately, we have experimentally verified that the scattering can be mitigated using spatial filters and does not decrease the phase shifting capabilities of the ZnSe Fresnel rhomb.

Thermal infrared (IR) lenses require efficient anti-reflection coating. Moth-eye (or egg-box) 2D subwavelength gratings have demonstrated their ability to reach a very high transmission for a wide wavelength and angular range. The use in thermal IR is simplified by the lower resolution for lithographic technology, compared to visible waveband. However, deeper structures must be engraved and lithography must be adapted to IR materials. In order to be cost-effective, the patterning must be produced by replication techniques, such as embossing. Our laboratory is now experimenting hot embossing of moth-eye patterns in chalcogenide substrates. In this paper, theoretical analysis, micro-lithographic technology and manufacturing processes are detailed.