The work presented here focuses on the structural health monitoring (SHM) of a foreign object damage (FOD) composite panel equipped with an innovative printed piezoelectric transducer network. The 3D woven composite FOD panel measures approximately 800 mm × 320 mm, is curved with a cross-sectional thickness varying from approximately 2 mm to 12 mm, and a stainless-steel leading edge is bonded at one of its sides. The core idea explored here is to rely on an innovative screen-printing technology to print a full piezoelectric transducer a flowing to successfully achieve SHM on such a complex composite structure. This work is being carried out within the European project MORPHO - H2020. After printing a 25 elements PZT network, a four points bending fatigue experimental campaign using the PZT network along with other sensor technologies (embedded optical fibres with FBG sensors and acoustic emission sensors) is carried out. This unique experimental campaign allows to generate data and will help to develop diagnostic and prognostic methodologies for remaining life estimation and SHM of the FOD panel. It is demonstrated here through impedance measurements that the printing process associated with the printed PZT transducers is highly repeatable thus validating its use at a larger industrial scale. Furthermore, the printed piezoelectric transducers a re shown to be able to detect foreign object impact and sense Lamb waves signals. This innovative printing technology for PZT transducers network is thus extremely promising. It is furthermore highly advantageous to use the printed transducers for SHM instead of regular ceramic ones as this technology is non-intrusive, add negligible weight, can be printed during the manufacturing process, and arrays of transducers ensure easy availability of another transducer in case of failure of one.