P

PA Hooijmeijer

View Pure Profile

Authored

20 records found

Effect of defects part 1: Splices with defects and multiple holes; fatigue and residual strength behaviour
Report - PA Hooijmeijer

High temperature exposure of Fibre Metal Laminates
Conference paper - PA Hooijmeijer, A Vlot

Doubler run-out fatigue properties
Report - PA Hooijmeijer

Fatigue and damage tolerance of GLARE

Cost reduction of GLARE components
Conference paper - PA Hooijmeijer

Thermal conductivity and specific heat of Glare
Report - PA Hooijmeijer

The behaviour of Glare material after severe impact in a row of holes or rivet row containing flaws and fatigue damage.
Conference paper - T.J. de Vries, PA Hooijmeijer, A Vlot

Effects of defects, part 2 Shear loading of a splice with defects

Experimental project to assess the failure mechanisms during blunt notch of Glare under 45 degrees
Report - PA Hooijmeijer

Fibre metal laminates exposed to high temperatures.
Conference paper - PA Hooijmeijer

Influence of local corrosion on tensile and blunt notch strength of Glare
Report - PA Hooijmeijer

Burn-through and lighting strike
Conference paper - PA Hooijmeijer

Riveted Repairs
Conference paper - PA Hooijmeijer

Fibre metal laminates: a state of the art

Repair of joints, literature study. GTO SLI B01-06
Report - PA Hooijmeijer

Debond growth in GLARE under compression load and elevated temperature.
Report - PA Hooijmeijer

Residual strength in combination with rivet holes and fatigue damage.

Blunt notch strength of GLARE at elevated test temperature.
Report - PA Hooijmeijer

Glare 2 under small off-axis angles; final report
Report - PA Hooijmeijer

Qualification properties and design allowables. GTO SLI B00-60.