Time series of topographic data are becoming increasingly widespread for monitoring geomorphic activity. Dense 3D time series are now obtained by near-continuous terrestrial laser scanning (TLS) installations, which acquire data at high frequency (e.g. hourly) and over long periods. Such datasets contain valuable information on topographic evolution over varying spatial and temporal scales. Current analyses however are mostly conducted based on pairwise surface or object-based change, which typically require the selection of thresholds and intervals to identify the processes involved and fail to account for the full history of change. Detected change may therefore be difficult to attribute to one or more underlying geomorphic processes causing the surface alteration. We present an automatic method for 4D change analysis that includes the temporal domain by using the history of surface change to extract the period and spatial extent of changes. A 3D space-time array of surface change values is derived from an hourly TLS time series acquired at a sandy beach over five months (2967 point clouds). Change point detection is performed in the time series at individual locations and used to identify change processes, such as the appearance and disappearance of an accumulation form. These provide the seed to spatially segment ‘4D objects-by-change’ using a metric of time series similarity in a region growing approach. Results are compared to pairwise surface change for three selected cases of anthropogenic and natural processes on the beach. The obtained information reflects the evolution of a change process and its spatial extent over the change period, thereby improving upon the results of pairwise analysis. The method allows the detection and spatiotemporal delineation of even subtle changes induced by sand transport on the surface. 4D objects-by-change can therefore provide new insights on spatiotemporal characteristics of geomorphic activity, particularly in settings of continuous surfaces with dynamic morphologies.@en

The Earth's landscapes are shaped by processes eroding, transporting and depositing material over various timespans and spatial scales. To understand these surface activities and mitigate potential hazards they inflict (e.g., the landward movement of a shoreline), knowledge is needed on the occurrences and impact of these activities. Near-continuous terrestrial laser scanning enables the acquisition of large datasets of surface morphology, represented as three-dimensional point cloud time series. Exploiting the full potential of this large amount of data, by extracting and characterizing different types of surface activities, is challenging. In this research we use a time series of 2,942 point clouds obtained over a sandy beach in The Netherlands. We investigate automated methods to extract individual surface activities present in this dataset and cluster them into groups to characterize different types of surface activities. We show that, first extracting 2,021 spatiotemporal segments of surface activity using an object detection algorithm, and second, clustering these segments with a Self-organizing Map (SOM) in combination with hierarchical clustering, allows for the unsupervised identification and characterization of different types of surface activities present on a sandy beach. The SOM enables us to find events displaying certain type of surface activity, while it also enables the identification of subtle differences between different events belonging to one specific surface activity. Hierarchical clustering then allows us to find and characterize broader groups of surface activity, even if the same type of activity occurs at different points in space or time. @en

Near-continuously acquired terrestrial laser scanning (TLS) data contains valuable information on natural surface dynamics. An important step in geographic analyses is to detect different types of changes that can be observed in a scene. For this, spatiotemporal segmentation is a time series-based method of surface change analysis that removes the need to select analysis periods, providing so-called 4D objects-by-change (4D-OBCs). This involves higher computational effort than pairwise change detection, and efforts scale with (i) the temporal density of input data and (ii) the (variable) spatial extent of delineated changes. These two factors determine the cost and number of Dynamic Time Warping distance calculations to be performed for deriving the metric of time series similarity. We investigate how a reduction of the spatial and temporal resolution of input data influences the delineation of twelve erosion and accumulation forms, using an hourly five-month TLS time series of a sandy beach. We compare the spatial extent of 4D-OBCs obtained at reduced spatial (1.0m to 15.0m with 0.5m steps) and temporal (2h to 96h with 2h steps) resolution to the result from highest-resolution data. Many change delineations achieve acceptable performance with ranges of ±10% to ±100% in delineated object area, depending on the spatial extent of the respective change form. We suggest a locally adaptive approach to identify poor performance at certain resolution levels for the integration in a hierarchical approach. Consequently, the spatial delineation could be performed at high accuracy for specific target changes in a second iteration. This will allow more efficient 3D change analysis towards near-realtime, online TLS-based observation of natural surface changes. @en

The 3rd edition of the international summer school "Close-range Sensing Techniques in Alpine terrain"took place in Obergurgl, Austria, in June 2019. This article reports on results from the training and seminar activities and the outcome of student questionnaire survey. Comparison between the recent edition and the past edition in 2017 shows no significant differences on the level of satisfaction on organizational and training aspects. Gender balance was present both in candidates and in the outcome of selections. Selection was based on past research activities and on topic relevance. The majority of trainees were therefore doctoral candidates and postdoctoral researchers, but also motivated master students participated. The training took place through keynotes, lectures, seminars, in the field with hands-on surveys followed by data analysis in the lab, and teamwork for preparing a final team presentation over different assignments. @en

Geomorphic processes occur spatially variable and at varying magnitudes, frequencies and velocities, which poses a great challenge to current methods of topographic change analysis. For the quantification of surface change, permanent terrestrial laser scanning (TLS) can generate time series of 3D point clouds at high temporal and spatial resolution. We investigate how the temporal interval influences volume change observed on a sandy beach regarding the temporal detail of the change process and the total volume budget, on which accretion and erosion counteract. We use an hourly time series of TLS point clouds acquired over six weeks in Kijkduin, the Netherlands. A raster-based approach of elevation differencing provides the volume change over time per square meter. We compare the hourly analysis to results of a three- and six-week observation period. For the larger period, a volume increase of 0.3 m³/m² is missed on a forming sand bar before it disappears, which corresponds to half its volume. Generally, a strong relationship is shown between observation interval and observed volume change. An increase from weekly to daily observations leads to a five times larger volume change quantified in total. Another important finding is a temporally variable measurement uncertainty in the 3D time series, which follows the daily course of air temperature. Further experiments are required to fully understand the effect of atmospheric conditions on high-frequency TLS acquisition in beach environments. Continued research of 4D geospatial analysis methods will enable automatic identification of dynamic change and improve the understanding of geomorphic processes. @en

The 2nd international summer school "Close-range sensing techniques in Alpine terrain" was held in July 2017 in Obergurgl, Austria. Participants were trained in selected close-range sensing methods, such as photogrammetry, laser scanning and thermography. The program included keynotes, lectures and hands-on assignments combining field project planning, data acquisition, processing, quality assessment and interpretation. Close-range sensing was applied for different research questions of environmental monitoring in high mountain environments, such as geomorphologic process quantification, natural hazard management and vegetation mapping. The participants completed an online questionnaire evaluating the summer school, its content and organisation, which helps to improve future summer schools.@en

Geographic observation benefits from the increasing availability of time series of 3D geospatial data, which allow analysis of change processes at high temporal detail and over extensive periods. In this context, the demand for advanced methods to detect and extract topographic surface changes from these 4D geospatial data emerges. Changes in natural scenes occur with varying magnitude, duration, spatial extent, and change rate, and the timing of their occurrence is not known. Standard pairwise change detection requires the selection of fixed analysis periods and the specification of magnitude thresholds to determine accumulation or erosion forms. In settings with continuous surface morphology and dynamic changes to the surface due to material transport, such change forms are typically temporary and may be missed or aggregated if they occur with spatial and/or temporal overlap. This is overcome with the extraction of 4D objects-by-change (4D-OBCs). These objects are obtained by firstly detecting surface changes in the temporal domain at locations in the scene. Subsequently, they are spatially delineated by considering the full history of surface change during region growing from the seed location of a detected change. To perform this spatiotemporal segmentation systematically for entire 3D time series, we develop a fully automatic approach of seed detection and selection, combined with locally adaptive thresholding for region growing of individual objects with varying change properties. We apply our workflow to a five-months hourly time series of around 3,000 terrestrial laser scanning point clouds acquired for coastal monitoring at a sandy beach in The Netherlands. This provides 2,021 4D-OBCs as extracted accumulation or erosion forms. Results are validated through majority agreement of six expert analysts, who evaluate the segmentation performance at sample locations throughout the scene. Accordingly, our method extracts surface changes with an error of omission of 4.7% and an error of commission of 16.6%. We examine the results and provide considerations how postprocessing of segments can further improve the change analysis workflow. The developed approach thereby provides a powerful tool for automatic change analysis in 4D geospatial data, namely to detect and delineate natural surface changes across space and time.@en

Sandy coasts form the interface between land and sea and their morphologies are highly dynamic. A combination of human and natural forcing results in morphologic changes affecting both nature values and coastal safety. Terrestrial laser scanning (TLS) is a technique enabling near-continuous monitoring of the changing morphology of a sandy beach-dune system with centimetre-order accuracy. In Kijkduin, The Netherlands, a laser scanner sampled one kilometre of coast at hourly intervals for about six months. This resulted in over 4,000 consecutive topographic scans of around one million points each, at decimetre-order point spacing. Analysis of the resulting dataset will offer new insights into the morphological behaviour of the beach-dune system at hourly to monthly time scales, ultimately increasing our fundamental scientific understanding of these complex geographic systems. It further provides the basis for developing novel algorithms to extract morphodynamic and geodetic information from this unique 4D spatiotemporal dataset. Finally, experiences from this TLS setup support the development of improved near-continuous 3D observation of both natural and anthropogenic scenes in general.@en