The direct conversion of CO2to CH3OH represents an appealing strategy for the mitigation of anthropogenic CO2emissions. Here, we report that small, narrowly distributed alloyed PdGa nanoparticles, prepared via surface organometallic chemistry from silica-supported GaIIIisolated sites, selectively catalyze the hydrogenation of CO2to CH3OH. At 230 °C and 25 bar, high activity (22.3 molMeOHmolPd-1h-1) and selectivity for CH3OH/DME (81%) are observed, while the corresponding silica-supported Pd nanoparticles show low activity and selectivity. X-ray absorption spectroscopy (XAS), IR, NMR, and scanning transmission electron microscopy-energy-dispersive X-ray provide evidence for alloying in the as-synthesized material. In situ XAS reveals that there is a dynamic dealloying/realloying process, through Ga redox, while operando diffuse reflectance infrared Fourier transform spectroscopy demonstrates that, while both methoxy and formate species are observed in reaction conditions, the relative concentrations are inversely proportional, as the chemical potential of the gas phase is modulated. High CH3OH selectivities, across a broad range of conversions, are observed, showing that CO formation is suppressed for this catalyst, in contrast to reported Pd catalysts.@en

The surface of supported heterogeneous catalysts often contains adsorbed water and hydroxyl groups even when water is not directly added to the reaction stream. Nonetheless, the reactivity of adsorbed water and hydroxyl groups is rarely considered. We demonstrate that water and hydroxyl groups can not only directly participate in the catalytic oxidation processes but are also able to generate and stabilize the catalytically active metal-oxide interface. We show that the reduction of Pt-Fe-supported catalysts with hydrogen in the presence of adsorbed water or steam allows for achieving one of the highest preferential carbon monoxide oxidation activities at ambient temperature. These conditions create active iron-associated hydroxyl groups next to platinum nanoparticles with enhanced reactivity towards carbon monoxide oxidation. Density functional theory calculations suggest that hydroxylation of oxidic iron species stabilizes the FeOx(OH)y/Pt interface, via strong metal-support interaction, which is confirmed by chemisorption measurements. Kinetic experiments, including those with 18O-labeled water, in combination with operando infrared spectroscopy, show that water and hydroxyl groups directly participate in preferential carbon monoxide oxidation. A quantitative correlation between the catalytic activity of Pt-FeOx(OH)y/γ-Al2O3 catalysts and the Fe2+ concentration, obtained using operando X-ray absorption spectroscopy, shows that the number of active Fe2+ sites and the carbon monoxide oxidation rate per active site can be significantly increased by water-assisted pretreatment with hydrogen. This work provides a new example of positive role of strong metal-support interaction for the design of more active catalysts.@en

On page 452, column 1 (lines 12?23) reads: H2 and CO chemisorption show an uptake of 0.91 molH2 molPd?1 and 0.61 molCO molPd ?1, respectively (Table 1, Supporting Information S6). Considering a 1:1 CO/Pd stoichiometry,32 the dispersion from CO chemisorption (D?CO) equals 61%, in a reasonable agreement with the dispersion from TEM (D?TEM 70%; Supporting Information S9).32 While H2 chemisorption is not effective for a determination of the metal dispersion of Pd nanoparticles due to the formation of a stable bulk hydride with larger particles (2.6 nm),32 a comparison of the H2 uptake and D?CO would correspond to approximately three hydrogen atoms per surface Pd.@en

A detailed study on the synthesis of Pt3Co intermetallic nanoparticles supported on ceria via preferential chemical vapor deposition was conducted, leading to a fundamental understanding of the deposition process and the Co-Pt alloying. This understanding helps us to develop a facile and scalable method for preferential adding of a metal on the surface of another metal already supported on an oxide which facilitates the design of novel structured nanoparticles. The fluidized flow reactor eliminated the deposition profile and resulted in Pt3Co nanoparticles uniformly and homogeneously distributed on ceria. The kinetic study of cobalt deposition on the platinum surface, in accordance with DFT calculations, demonstrates that the platinum surface catalyzes the deposition reaction; while the ceria surface is inert in the preferential deposition temperature window between 150 °C and 180 °C. The obtained sample was characterized by in situ XRD, HAADF-STEM, FT-IR, and XAS methods. The results indicate the formation of uniform Pt3Co nanoparticles with an average size of 1.1 nm. This sample showed superior catalytic activity in preferential oxidation of CO with an almost twice higher CO conversion rate and CO2 selectivity compared to a classically synthesized sample with successive impregnation.@en

The direct synthesis of methanol via the hydrogenation of CO2, if performed efficiently and selectively, is potentially a powerful technology for CO2 mitigation. Here, we develop an active and selective Cu-Zn/SiO2 catalyst for the hydrogenation of CO2 by introducing copper and zinc onto dehydroxylated silica via surface organometallic chemistry and atomic layer deposition, respectively. At 230 °C and 25 bar, the optimized catalyst shows an intrinsic methanol formation rate of 4.3 g h-1 gCu-1 and selectivity to methanol of 83%, with a space-time yield of 0.073 g h-1 gcat-1 at a contact time of 0.06 s g mL-1. X-ray absorption spectroscopy at the Cu and Zn K-edges and X-ray photoelectron spectroscopy studies reveal that the CuZn alloy displays reactive metal support interactions; that is, it is stable under H2 atmosphere and unstable under conditions of CO2 hydrogenation, indicating that the dealloyed structure contains the sites promoting methanol synthesis. While solid-state nuclear magnetic resonance studies identify methoxy species as the main stable surface adsorbate, transient operando diffuse reflectance infrared Fourier transform spectroscopy indicates that μ-HCOO*(ZnOx) species that form on the Cu-Zn/SiO2 catalyst are hydrogenated to methanol faster than the μ-HCOO*(Cu) species that are found in the Zn-free Cu/SiO2 catalyst, supporting the role of Zn in providing a higher activity in the Cu-Zn system.@en

CO2 hydrogenation is an attractive way to store and utilize carbon dioxide generated by industrial processes, as well as to produce valuable chemicals from renewable and abundant resources. Iron catalysts are commonly used for the hydrogenation of carbon oxides to hydrocarbons. Iron-molybdenum catalysts have found numerous applications in catalysis, but have been never evaluated in the CO2 hydrogenation. In this work, the structural properties of iron-molybdenum catalysts without and with a promoting alkali metal (Li, Na, K, Rb, or Cs) were characterized using X-ray diffraction, hydrogen temperature-programmed reduction, CO2 temperature-programmed desorption, in-situ 57Fe Mossbauer spectroscopy and operando X-ray adsorption spectroscopy. Their catalytic performance was evaluated in the CO2 hydrogenation. During the reaction conditions, the catalysts undergo the formation of an iron (II) molybdate structure, accompanied by a partial reduction of molybdenum and carbidization of iron. The rate of CO2 conversion and product selectivity strongly depend on the promoting alkali metals, and electronegativity was identified as an important factor affecting the catalytic performance. Higher CO2 conversion rates were observed with the promoters having higher electronegativity, while low electronegativity of alkali metals favors higher light olefin selectivity.@en

Catalytic systems based on supported noble metals are extensively studied because of their widespread application. Discussions remain about the nature of the active species, whether they are atomically dispersed or nanoparticles, and their reactivity. In this work, combining in situ/operando spectroscopy with theoretical modeling, we propose a phase diagram of atomically dispersed platinum on ceria, demonstrating that it reversibly changes from PtIVO2 to PtIIO as a function of temperature and oxygen partial pressure. The phase diagram helps identify the stability domain of each species, while spectroscopies provide a quantitative evaluation depending on the reaction conditions. Finally, our results show that high-temperature activation in the presence of steam of supported atomically dispersed platinum enhances the activity toward low-temperature carbon monoxide oxidation because it promotes aggregation into nanoparticles. This work highlights the structure-activity relationship in supported metal catalysts and proposes a suitable approach to determine the amount of each species before the investigation of the reaction mechanism.@en

The structure of copper sites formed under an oxidative environment and their evolution in the course of the reaction with methane at elevated temperature was investigated by means of Cu K-edge X-ray absorption spectroscopy for a series of copper-containing MFI, MOR, and FAU zeolites. The pretreatment in oxygen at 723 K leads to the formation of copper(II)-oxo sites, whose nature depends on the framework type. Dimeric species are formed in CuMFI material, dimeric and monomeric sites coexist in CuMOR, and agglomerated copper-oxo nanoclusters are found in large-pore copper-containing faujasite (CuFAU). For all studied materials, the reaction with methane resulted in the exclusive formation of copper(I) species; no formation of metallic copper was detected even at 748 K. The nature of formed copper(I) species is governed by the structure of corresponding copper(II) centers. In particular, monomeric and dimeric copper(II)-oxo sites hosted in CuMOR and CuMFI are transformed into isolated copper(I) cations coordinated to ion-exchange positions of the zeolite. Contrarily, copper(II)-oxo clusters present in CuFAU undergo restructuring with only a partial loss of extra-framework oxygen and form aggregated species with a structure similar to that of bulk copper(I) oxide.@en

Copper-exchanged zeolites are a class of redox-active materials that find application in the selective catalytic reduction of exhaust gases of diesel vehicles and, more recently, the selective oxidation of methane to methanol. However, the structure of the active copper-oxo species present in zeolites under oxidative environments is still a subject of debate. Herein, we make a comprehensive study of copper species in copper-exchanged zeolites with MOR, MFI, BEA, and FAU frameworks and for different Si/Al ratios and copper loadings using X-ray absorption spectroscopy. Only obtaining high quality EXAFS data, collected at largek-values and measured under cryogenic conditions, in combination with wavelet transform analysis enables the discrimination between the copper-oxo species having different structures. The zeolite topology strongly affects the copper speciation, ranging from monomeric copper species to copper-oxo clusters, hosted in zeolites of different topologies. In contrast, the variation of the Si/Al ratio or copper loading in mordenite does not lead to significant differences in XAS spectra, suggesting that a change, if any, in the structure of copper species in these materials is not distinguishable by EXAFS.@en