This study presents a hybrid framework to predict stability solutions of buried structures under active trapdoor conditions in natural clays with anisotropy and heterogeneity by combining physics-based and data-driven modeling. Finite-element limit analysis (FELA) with a newly developed anisotropic undrained shear (AUS) failure criterion is used to identify the underlying active failure mechanisms as well as to develop a numerical (physics-based) database of stability numbers for both planar and circular trapdoors. Practical considerations are given for natural clays to three linearly increasing shear strengths in compression, extension, and direct simple shear in the AUS material model. The obtained numerical solutions are compared and validated with published solutions in the literature. A multivariate adaptive regression splines (MARS) algorithm is further utilized to learn the numerical solutions to act as fast FELA data-driven surrogates for stability evaluation. The current MARS-based modeling provides both relative importance index and accurate design equations that can be used with confidence by practitioners.

Cement-based columns in combination with geosynthetic reinforcement is a well-established soft ground improvement technique to enhance embankment stability. This paper aims to present a finite-element (FE) study based on a case history of a geosynthetic-reinforced column-supported (GRCS) embankment over soft soil. In this study, the columns are simulated with an advanced Concrete model to simulate the development of possible cracking and induced strain-softening. Numerical results are compared against published centrifuge tests, giving confidence to the established FE model with the Concrete model. New insights into the progressive failure mechanisms of GRCS embankments over soft soil are then discussed by examining the stress paths, internal forces, and cracks, as well as the plastic failure zones of columns. In addition, the role of columns and geosynthetics on the progressive failure mechanisms (failure loads and sequences) is also examined by an extensive parametric study. The results suggest that provided the optimization of compressive and tensile forces in the columns combined with the tensile stiffness of the geosynthetics is put in place, more columns can be mobilized to resist global sliding failure and to improve the bearing capacity of GRCS embankments.

This paper presents a stability study on the collapse mechanisms of a plane-strain tunnel face in c-ϕ soils using the upper bound finite element method with rigid translatory moving elements (UBFELA-RTME) and nonlinear programming technique. Practical considerations are given to the unlined length influence behind the tunnel face. An advanced mesh adaptive updating strategy is adopted, aiming to improve the computational efficiency, the accuracy of upper-bound solutions, as well as the produced collapse mechanisms. The unlined length influence on the face stability and collapse mechanism of the tunnel face are determined with various combinations of tunnel depth ratios, soil friction angles, and dilatancy angles. Using the UBFELA-RTME with the Davis's approach and a mesh adapting strategy, the non-associated plasticity flow rule can be well approximated. The developed technique was validated against different numerical methods, and it is concluded that the tunnel face stability can be improved by increasing soil friction and dilatancy angles, and yet weakens as the unlined length increases where a mesh-liked collapse zone gradually appears on the tunnel vault top. It gradually evolves to a global collapse failure till the ground surface. The findings contribute to a better understanding of the ground surface failure under the unlined support length influence in tunnel construction.

A narrow backfill zone is formed when retaining walls are built near existing stabilized structures (e.g., rock faces). In such circumstances, the classical passive earth pressure coefficient is no longer applicable, and a correction factor is required for the design. This paper aims to develop analytical solutions for estimating the passive earth pressure problem of narrow cohesive-frictional backfills behind retaining walls. The novel arched differential element method considers both effects of the horizontal shear stress in backfills and the soil arching, and it is employed to estimate the passive earth pressure distribution along with wall depth. The solutions are compared against those published experimental data, analytical approaches, and finite-element limit analysis solutions. The factors influencing the distribution of passive earth pressure are also undertaken using a series of parametric studies. To implement the derived solutions into a routine design, a modified practical design equation is presented following the standard Coulomb's solutions. This work provides a theoretical guideline for the initial design of retaining walls with narrow soils, and it should be of great interest to practitioners.

Pit-in-pit (PIP) excavations in an aquifer–aquitard system likely undergo catastrophic failures under the hydraulic uplift, the associated undrained stability problem, however, has not been well analyzed in the past. To this end, a hypothetical model of PIP braced excavation in typical soil layers of Shanghai, China is developed using the finite element limit analysis (FELA) tool. The FELA solutions of safety factors (FSs) against hydraulic uplift are verified with the results from the finite element analysis with strength reduction technique (SRFEA) and existing design approaches. Subsequently, FELA is employed to identify the triggering and failure mechanisms of PIP braced excavations subjected to hydraulic uplift. A series of parametric studies considering the various geometric configurations of the PIP excavation, undrained shear strengths of aquitard, and artesian pressures are carried out. The sensitivities of relevant design parameters are further assessed using a multivariate adaptive regression splines (MARS) model that is capable of accurately capturing the nonlinear relationships between a set of input variables and output variables in multi-dimensions. A MARS-based design equation used for predicting FS is finally presented using the artificial dataset from FELA for practical design uses.

There is currently a lack of an available design approach to estimate the earth pressure in narrow backfills behind retaining walls rotated about the top (RT). The considerations of some significant factors, primarily load transfer mechanisms (soil arching effect and horizontal shear stress in soils), failure mechanisms (shape and number of slip surfaces) and soil cohesion are often neglected for brevity in routine design. Such simplifications may lead to significant deviations from reality. This paper first uses the finite element limit analysis (FELA) technique to identify the underlying failure mechanisms and load transfer mechanisms. The results observed in FELA models indicate that active rotation of walls about the top develops one curved slip surface, which can be approximated by the log-spiral function. Under the soil arching effect, the upper intermediate passive zone with major principal stress rotation trajectory and the lower active zone with minor one can be defined. The arched differential element method (ADEM) is then introduced to formulate the earth pressure calculation. The results from newly published tests, existing analytical approaches, and FELA are compared to validate the accuracy of the proposed approach in both purely-frictional and cohesive-frictional soils. Parametric studies are further conducted to thoroughly understand the earth pressure problems, considering the effects of sensitive design variables (e.g. aspect ratio, soil strength parameters, and wall-soil interface friction angle). The analytical approach presented here would be a great extension to the design guidelines for the retaining structures with narrow backfills.

Active earth pressure on retaining structures supporting a narrow column of soil cannot be properly analysed using Coulomb's theory. Finite-element limit analysis (FELA) shows that the soil forms multiple failure surfaces if the soil column is sufficiently narrow. This paper proposes a framework for active earth pressure estimation for narrow soils by combining an arched differential element method and a sliding wedge method. The analytical framework considers both soil friction and cohesion, soil arching effects and shear stress between adjacent differential elements. The solution obtained is validated against experimental data and FELA results. Through parametric studies, the effects on the active earth pressure of the aspect ratio, soil friction, soil cohesion and wall-soil interface roughness are examined. To facilitate the use of the proposed framework in design, a modified active earth pressure coefficient and an application height of active thrust are provided.

Large-diameter monopiles are widely used as the foundation to support offshore wind turbines (OWTs) in shallow coastal waters. The benefits of small-to-medium diameter tapered piles have been reported in the past. The potential use of large-diameter tapered monopiles installed by impact driving to support OWTs is thus presented, and then comparatively assessed by numerical analyses in terms of energy balance and installation mechanisms. A three-dimensional large deformation finite element (3D-LDFE) model of monopiles driven in clay was developed using a Coupled Eulerian-Lagrangian (CEL) approach. An advanced user-defined hypoplasticity clay (HC) model was employed to model undrained kaolin clay, featuring nonlinear behavior from small strain to large strain. The force-time curve defined by the operating data of a state-of-the-art hammer in the offshore industry was inputted to explicitly model impact driving. Better agreement between the measured and the simulated results was observed to validate the accuracy of the numerical model. The numerical results obtained give greater confidence to the future use of large diameter tapered monopiles for OWTs.

The development of installation technologies of open caissons has been lagging behind increasingly complex construction conditions. For such purpose, a new installation technology of large diameter deeply-buried (LDDB) open caissons has been developed and then used for construction of twin LDDB caissons into undrained ground with stiff soils in Zhenjiang, China. To assess the installation effects and filed performance, a monitoring program was presented to document the variations in total jacking forces provided by new shaft driven method, ground water level (GWL) around the caisson shaft, inclination angles of caisson shafts and radial displacements of surrounding soils as well as surface settlements of existing nearby facilities. It is observed that the monitoring data during the installation falls almost entirely within the design criteria, the reported new technology has limited impacts on the induced ground movements, depending on the variation in GWL, interaction between twin caissons and excavation-induced unloading effect. Moreover, the total jacking forces increase approximately in stepwise shape as the installation depth increases; the change law of surface settlements is highly similar to those of GWL, showing their close correlation; the larger inclination angles of caisson shafts are mainly encountered in the earlier installation phase, but well controllable. Further discussion on ground movements caused by various technologies confirms the feasibility of new installation technology. Both the observed and compared results give greater confidence on the use of such the technology in practice.