We report a high accuracy pointing technique for quasi-optical hot electron bolometer (HEB) mixers in focal-plane arrays designed to operate at 1.4, 1.9, and 4.7 THz. The high accuracy pointing is achieved by prealignment of a HEB chip to a lens, measuring the angular error of each mixer in an array assembly, and then realignment of the chip to the same lens to correct the error. The realigned mixers, using 5 mm diameter Si elliptical lenses designed for operation at 4.7 THz, show a final pointing error distribution with an average (μ) = 0.13° and standard deviation (σ) = 0.06°, with respect to the normal direction of the respective array plane. Those using 10 mm diameter lenses designed for operation either at 1.4 or 1.9 THz, show μ = 0.08° and σ = 0.03°. We demonstrated our pointing technique in five 4×2 HEB focal plane arrays developed for NASA's balloon borne GUSTO THz observatory. Our results corroborate the simulated beam steering factors used to calculate the realignment corrections. With the unprecedented pointing accuracy at the high frequencies, our technique can significantly facilitate the use of lens-antenna, quasi-optical mixers for future focal-plane arrays, which is able to compete with traditional feedhorn-waveguide mixer arrays, operated typically below 1 THz, for astronomical instrumentation.@en

Terahertz (THz) radiation encompasses a wide spectral range within the electromagnetic spectrum that extends from microwaves to the far infrared (100 GHz-∼30 THz). Within its frequency boundaries exist a broad variety of scientific disciplines that have presented, and continue to present, technical challenges to researchers. During the past 50 years, for instance, the demands of the scientific community have substantially evolved and with a need for advanced instrumentation to support radio astronomy, Earth observation, weather forecasting, security imaging, telecommunications, non-destructive device testing and much more. Furthermore, applications have required an emergence of technology from the laboratory environment to production-scale supply and in-the-field deployments ranging from harsh ground-based locations to deep space. In addressing these requirements, the research and development community has advanced related technology and bridged the transition between electronics and photonics that high frequency operation demands. The multidisciplinary nature of THz work was our stimulus for creating the 2017 THz Science and Technology Roadmap (Dhillon et al 2017 J. Phys. D: Appl. Phys. 50 043001). As one might envisage, though, there remains much to explore both scientifically and technically and the field has continued to develop and expand rapidly. It is timely, therefore, to revise our previous roadmap and in this 2023 version we both provide an update on key developments in established technical areas that have important scientific and public benefit, and highlight new and emerging areas that show particular promise. The developments that we describe thus span from fundamental scientific research, such as THz astronomy and the emergent area of THz quantum optics, to highly applied and commercially and societally impactful subjects that include 6G THz communications, medical imaging, and climate monitoring and prediction. Our Roadmap vision draws upon the expertise and perspective of multiple international specialists that together provide an overview of past developments and the likely challenges facing the field of THz science and technology in future decades. The document is written in a form that is accessible to policy makers who wish to gain an overview of the current state of the THz art, and for the non-specialist and curious who wish to understand available technology and challenges. A such, our experts deliver a ‘snapshot’ introduction to the current status of the field and provide suggestions for exciting future technical development directions. Ultimately, we intend the Roadmap to portray the advantages and benefits of the THz domain and to stimulate further exploration of the field in support of scientific research and commercial realisation.@en

We have simulated and measured the beam properties of lens-antenna coupled hot electron bolometer mixers at a few supra-terahertz frequencies between 1.4 and 5.3 THz. The quasi-optical structures consist of an elliptical lens and a logarithmic spiral antenna. The model used for our simulations consists of a finite-element analysis to simulate the far-field radiation pattern of the antenna, geometrical optics to map the antenna radiation to the lens surface, and physical optics to calculate an arbitrary far field. We perform a thorough study of the beam properties, such as beam waist radius, phase center location and axial ratio by varying the diameter and extension of the lens, and misalignments of the antenna relative to the lens, at different operating frequencies. The simulation results are applied to the design and optimization of three different lenses for mixers to be operated at 1.4, 1.9, and 4.7 THz, respectively, which will be used in the heterodyne array receivers on board of NASA's balloon borne GUSTO observatory. The beam properties were verified experimentally by measuring the beam patterns in amplitude at multiple planes using a heterodyne technique. We found that the experimental results show good agreement with those from the simulations. Our work has delivered the mixers with the required beam characteristics for GUSTO. @en

A full demonstration of the Fourier phase grating used as 4.7 THz local oscillator (LO) multiplexer for Galactic/Extragalactic ULDB Spectroscopic Terahertz Observatory (GUSTO) is presented in this paper, including its design, modeling, tolerance analysis, and experimental characterizations of the angular and intensity distributions among 2 × 4 output beams and the power efficiency. A quantum cascade laser (QCL) is used to generate the input beam for evaluation of the grating performance in its all relevant aspects with an accuracy level never reported before, where good agreements with modeling results are found. This is the first asymmetric-profile grating fully modelled and characterized at a THz frequency, that further confirms the versatility of this technology for providing an intermediate optical element for feeding multiple array detectors with a single radiation source at such a scientifically interesting frequency regime. @en