This article proposes a transformerless, capacitively isolated converter based on a full-bridge topology with phase shift control. Compared to the existing capacitively isolated converters, the proposed design offers the advantage of zero mean voltage across the isolating capacitors, thereby reducing voltage stress. A comprehensive analytical model is developed to describe the converter’s operation in both continuous and discontinuous conduction modes. The model is validated through an experimental prototype tested at power levels up to 6 kW and switching frequencies up to 500 kHz, achieving a peak conversion efficiency exceeding 98%. The experimental results confirm the accuracy of the theoretical model and waveforms.

The inherently intermittent nature of photovoltaic (PV) energy has brought increasing interest towards the integration between PV sources and Battery Energy Storage Systems (BESS). In this paper, a Series Partial Power Processing (PPP) converter based on Capacitive Power Transfer (CPT) is proposed to integrate PV and BESS in a grid-connected inverter system. The proposed converter has been simulated according to a PV string capable to provide 1430 W under full irradiance conditions, a BESS nominal voltage equal to 215 V and a solar inverter assumed to operate with a minimum voltage of 150 V and a maximum current of 10 A. Simulation tests carried out at different conditions of solar radiation and required load power aim at demonstrating the correct operation of the proposed system.