J. Vlieland
Please Note
9 records found
1
The development, operation, and regulation of nuclear reactors that utilize molten salts as fuel or as heat transfer media require knowledge of the thermal properties of the salt systems and quantification of the corresponding uncertainties. Knowledge of molten salt properties is also necessary for applications in material synthesis, processing, separations, solar thermal power generation, and energy storage. A round robin was conducted with national laboratory and university participants from twenty-one laboratories in five countries to compare property measurements, to better understand uncertainties, and to identify possible best practices. Two salt mixtures, each from a common batch, were distributed to participants for evaluation: equimolar NaCl-KCl and 45.0LiF-13.7NaF-41.3KF mol % (FLiNaK). Measurements were performed to determine the major constituent composition, oxygen content, density, thermal expansivity, melting point, and thermal conductivity. Error analysis was performed on each measurement for uncertainty quantification for each type of property that was explored. The resulting discussion of the methodologies used in this work is meant to lay the groundwork for the development of standard methods and reference materials for future high-temperature property measurements on halide melts.
The chemistry following cladding failure in Lead-cooled Fast Reactors involves the interaction between lead (Pb) coolant and the Joint Oxyde Gain (JOG)-phase, mostly composed of dicesium molybdate (Cs2MoO4). A thermodynamic analysis of coolant-JOG phase chemical interaction as studied via the scenario of Pb-Cs2MoO4 chemical interaction is reported. Measurements of the standard thermodynamic properties of α -Cs2Pb(MoO4)2 are presented. The enthalpy of formation of α -Cs2Pb(MoO4)2 is measured to be -(2570.7 ± 2.3) kJ · mol−1 using solution calorimetry, while the standard entropy is determined to be (399 ± 12) J · K−1·mol−1 using thermal-relaxation calorimetry. Thermodynamic calculations show that Cs2Pb(MoO4)2 is in several cases thermodynamically stable under conditions typical for operation of Lead-cooled Fast Reactors. This means Cs2Pb(MoO4)2 can form in cladding failure scenarios.
The thermodynamic and thermo-physical properties of the molten salt system [Formula presented] have been investigated using an experimental and modelling approach. This molten salt system includes a single intermediate compound [Formula presented], whose structure has been investigated using X-ray and neutron diffraction. Furthermore, this system exhibits solubility of [Formula presented] in [Formula presented] at high temperatures up to a concentration of around 25% [Formula presented] at 1060 K. Additionally, our measurements show solubility of [Formula presented] in [Formula presented] up to about 5% [Formula presented] at 973 K. The investigation of these solid solutions has been performed using quenching experiments and subsequent post-characterisation by X-ray diffraction (XRD). Phase diagram equilibria have also been investigated using differential scanning calorimetry (DSC). Using the aforementioned information on phase transitions, intermediate compound formation, and mutual solid solubility, a thermodynamic assessment of the system has been performed using the CALPHAD method. The model for the Gibbs energy of the liquid solution is the quasi-chemical formalism in the quadruplet approximation, while the model for the Gibbs energy of the solid solutions is a two-sublattice polynomial model.
The quaternary compound Cs2Pb(MoO4)2 was synthesized and its structure was characterized using X-ray and neutron diffraction from 298 to 773 K, while thermal expansion was studied from 298 to 723 K. The crystal structure of the high-temperature phase β-Cs2Pb(MoO4)2 was elucidated, and it was found to crystallize in the space group R3̅m (No. 166), i.e., with a palmierite structure. In addition, the oxidation state of Mo in the low-temperature phase α-Cs2Pb(MoO4)2 was studied using X-ray absorption near-edge structure spectroscopy. Phase diagram equilibrium measurements in the Cs2MoO4-PbMoO4 system were performed, revisiting a previously reported phase diagram. The equilibrium phase diagram proposed here includes a different composition of the intermediate compound in this system. The obtained data can serve as relevant information for thermodynamic modeling in view of the safety assessment of next-generation lead-cooled fast reactors.
New insights into the Cs-Mo-O system
Experimental studies of the Cs2MoO4-MoO3 pseudo-binary system
The ternary cesium molybdates Cs2Mo2O7, Cs2Mo3O10, Cs2Mo5O16 and Cs2Mo7O22 have been synthesized in this work using a solid state route and their structures have been characterized using X-ray diffraction. The enthalpies of formation of Cs2Mo2O7 and Cs2Mo3O10 have been measured using solution calorimetry, yielding ΔfHmo(Cs2Mo2O7, cr, 298.15 K) = −(2301.6 ± 4.7) kJ · mol−1 and ΔfHmo(Cs2Mo3O10, cr, 298.15 K) = −(3075.6 ± 6.5) kJ · mol−1, respectively. In addition, the transition temperatures and transition enthalpies of Cs2Mo2O7, Cs2Mo3O10, Cs2Mo5O16 and Cs2Mo7O22 have been determined using differential scanning calorimetry. Finally, phase diagram equilibria measurements in the Cs2MoO4-MoO3 pseudo-binary section have been performed, that have yielded generally slightly lower transition temperatures than reported in previous studies. Those data can serve as valuable input for thermodynamic modelling purposes of the fission products chemistry in Light Water Reactors and next generation Sodium-cooled Fast Reactors and Lead-cooled Fast Reactors.
Examination of the short-range structure of molten salts
ThF4, UF4, and related alkali actinide fluoride systems
The short-range structures of LiF-ThF4, NaF-AnF4, KF-AnF4, and Cs-AnF4 (An = Th, U), were probed using in situ high temperature Extended X-ray Absorption Fine Structure (EXAFS) spectroscopy. Signally, the EXAFS spectra of pure molten ThF4 and UF4 were measured for the first time. The data were interpreted with the aid of Molecular Dynamics (MD) and standard fitting of the EXAFS equation. As in related studies, a speciation distribution dominated by [AnFx]4-x (x = 7, 8, 9) coordination complexes was observed. The average coordination number was found to decrease with the increasing size of the alkali cation, and increase with AnF4 content. An average coordination number close to 6, which had not been detected before in melts of alkali actinide fluorides, was seen when CsF was used as solvent. This journal is
The development at the Delft University of Technology (TU Delft, The Netherlands) of an experimental set-up dedicated to high-temperature in situ EXAFS measurements of radioactive, air-sensitive and corrosive fluoride salts is reported. A detailed description of the sample containment cell, of the furnace design, and of the measurement geometry allowing simultaneous transmission and fluorescence measurements is given herein. The performance of the equipment is tested with the room-temperature measurement of thorium tetrafluoride, and the Th—F and Th—Th bond distances obtained by fitting of the EXAFS data are compared with the ones extracted from a refinement of neutron diffraction data collected at the PEARL beamline at TU Delft. The adequacy of the sample confinement is checked with a mapping of the thorium concentration profile of molten salt material. Finally, a few selected salt mixtures (LiF:ThF4) = (0.9:0.1), (0.75:0.25), (0.5:0.5) and (NaF:ThF4) = (0.67:0.33), (0.5:0.5) are measured in the molten state. Qualitative trends along the series are discussed, and the experimental data for the (LiF:ThF4) = (0.5:0.5) composition are compared with the EXAFS spectrum generated from molecular dynamics simulations.