Alkali-activation is a technically sound pathway to valorize industry wastes and by-products, and there has been a burgeoning interest in evaluating the potential of waste streams and/or by-products from different industries as precursors for alkali-activated materials production. In the context of sustainable construction materials, as well as other industrial systems, the use of such non-conventional precursors addresses the challenges associated with the global availability and management of such resource streams. This includes the availability of alternative valorisation routes, the life cycle implications of using waste streams, and the pragmatic issues around incorporating a wide range of precursor materials for future proof this technology. In this chapter an overview of studies utilizing alternative precursors for producing alkali-activated cements is presented, analyzing the characteristics of each resource, and identifying the links between mix design formulations and the performance of the alkali-activated materials produced with them. This in order to elucidate the existing knowledge gaps to facilitate the widespread uptake of such resources as key precursors for producing this type of cements.

Among the various examples of sustainable construction materials explored in scientific literature, alkali-activated materials excel as one of the most mature and reliable solutions for large scale applications. It consists on the combination of an alkaline source in liquid or solid state, and a partially-to-fully amorphous solid precursor. The combination of these components leads to the obtainment of a hardened material which resembles Portland-cement based products. The performance and durability of these alternative binders is highly dependent on their components and production methods, and multiple laboratorial- and industrial-scale examples have shown their capability of outperforming conventional building materials. Practical challenges with variations in chemistry and mineralogy of raw materials, and the global utilization of prescriptive standards for structural building materials, hinder a wider utilization of these binders, and the efforts of the scientific and applied industry communities in overcoming these barriers is detailed throughout this report. This chapter provides an overview of alkali-activated binders, summarizing the main characteristics of their components, their reaction mechanisms, their challenges, and the expected advances of the technology with respect to one-part binders.

Two synthesis pathways (one- and two-part) in alkali-activated binders were compared using ground granulated blast furnace slag (GGBFS), mineral wool (MW) activated using dry and liquid alkali activators with similar Na₂O/SiO₂ modulus. The effect of activator type on reaction kinetics, strength development, setting times, and durability shows that one-part synthesis does not only improve early strength, but also provide better durability properties. While the highest compressive strength (56 MPa, 90 days) was achieved for the one-part mix (DM), the reaction products (presence of Mg–Al layered double hydroxide and C–S–H-like phases) observed for both mortar mixes were similar. The DM mortars showed better resistance to sulfate attack than two-part mix (WM) mortars and sets faster. The results highlight the significance of the one-part pathways in the synthesis of alkali-activated materials.