Uncertainty affects estimates of the power potential of tidal currents, resulting in large ranges in values reported for sites such as the Pentland Firth, UK. Kreitmair et al. (2019, R. Soc. open sci. 6, 180941. (doi:10.1098/rsos.191127)) have examined the effect of uncertainty in bottom friction on tidal power estimates by considering idealized theoretical models. The present paper considers the role of bottom friction uncertainty in a realistic numerical model of the Pentland Firth spanned by different fence configurations. We find that uncertainty in removable power estimates resulting from bed roughness uncertainty depends on the case considered, with relative uncertainty between 2% (for a fully spanned channel with small values of mean roughness and input uncertainty) and 44% (for an asymmetrically confined channel with high values of bed roughness and input uncertainty). Relative uncertainty in power estimates is generally smaller than (input) relative uncertainty in bottom friction by a factor of between 0.2 and 0.7, except for low turbine deployments and very high mean values of friction. This paper makes a start at quantifying uncertainty in tidal stream power estimates, and motivates further work for proper characterization of the resource, accounting for uncertainty inherent in resource modelling.@en

Uncertainty affects estimates of the power potential of tidal currents, resulting in large ranges in values reported for a given site, such as the Pentland Firth, UK. We examine the role of bottom friction, one of the most important sources of uncertainty. We do so by using perturbation methods to find the leading-order effect of bottom friction uncertainty in theoretical models by Garrett & Cummins (2005 Proc. R. Soc. A 461, 2563-2572. (doi:10.1098/rspa.2005.1494); 2013 J. Fluid Mech. 714, 634-643. (doi:10.1017/jfm.2012.515)) and Vennell (2010 J. Fluid Mech. 671, 587-604. (doi:10.1017/S0022112010006191)), which consider quasi-steady flow in a channel completely spanned by tidal turbines, a similar channel but retaining the inertial term, and a circular turbine farm in laterally unconfined flow. We find that bottom friction uncertainty acts to increase estimates of expected power in a fully spanned channel, but generally has the reverse effect in laterally unconfined farms. The optimal number of turbines, accounting for bottom friction uncertainty, is lower for a fully spanned channel and higher in laterally unconfined farms. We estimate the typical magnitude of bottom friction uncertainty, which suggests that the effect on estimates of expected power lies in the range 25 to +30%, but is probably small for deep channels such as the Pentland Firth (5-10%). In such a channel, the uncertainty in power estimates due to bottom friction uncertainty remains considerable, and we estimate a relative standard deviation of 30%, increasing to 50% for small channels.@en