The high speed rail line in the Netherlands, constructed since 2002, is built to create a fast travel connection from Amsterdam to Rotterdam and the Belgium border. The track is designed for trains with a maximum operating train speed of 300 km/h. A great part of the structure is founded on typical Dutch soft soils consisting of Holocene clay and peat layers. To ensure high speeds, mostly settlement free plates with a ballastless track structure are constructed to produce optimum track qualities. At the village Rijpwetering a part of the track, parallel to the highway, has shown lateral deformations since construction. This has resulted in the research question “What are the main factors driving the horizontal deformation mechanism in the high-speed rail settlement free plate structure and what measures can be taken to solve these horizontal deformations?” The research consists of an analysis of the measurement results since 2005. From the measurement results a clear division can be made between the supported and the unsupported sections of the structure. The supported sections have almost stopped displacing in time with an average deformation rate of 0 to 0.5 mm per year. Unsupported sections show an ongoing deformation with a rate of 2.7 to 3.3 mm per year. This deformation will continue and lead to problems concerning structural safety due to bending moments in the top of the foundation pile. To identify the mechanism, a finite element modelling of the track structure embankment is performed from which the deformation behaviour is assessed. Multiple geometrical variants are considered which lead to asymmetrical horizontal deformations. From the simulations an asymmetrical soil layer with a varying stiffness in the subsoil on either side has led to the highest deformation behaviour. In other words, an embankment partly founded on soft soils (peat) and partly on stiff soils (sand). This can be identified as the main factor driving the horizontal deformation mechanism. The combination of different variants leads to results corresponding to the field measurements. To stop horizontal deformations the model is updated with 2 variants to observe the effectivity of the measures. One option is to apply a prestressed sheetpile wall, the other option is to reduce the structures weight with a low weight material (EPS). By applying a prestressed sheetpile in the slope of the embankment the resulting deformations can be stopped when applying a prestressing force of 100 to 150 kN. For the weight reduction, the EPS has to be placed in the slope on the soft soil. Reducing the weight with 144 kN/m or when applying EPS an area of 8.5mm2 stops further deformations. Applying weight reduction on the side of the stiff soil will only increase the problem and deformations will grow. Since weight reduction is usually a cheaper and a lower risk measure in comparison to prestressed sheetpile structures, it’s a very interesting alternative to investigate more accurately. Depending on the surrounding structures and construction possibilities the best option can be chosen to reduce deformations in this structure and prevent deformations in future structures.