Geomagnetically induced currents (GICs) are referred to the quasi-DC current flows in power networks, driven by complex space weather-related phenomena. Such currents are a potential threat to the power delivery capability of electrical grids. To mitigate the detrimental impacts of GICs on critical infrastructures, the GICs should be monitored in power systems. Being inherently DC from the power frequency point of view, the components of GICs are, however, challenging and costly to monitor in AC power grids. This paper puts forward a novel methodology for the real-time estimation of GICs in power transformers. Such aim is attained by means of an extended Kalman filter (EKF)-based approach, mounted on the nonlinear state-space model of the transformer, whose parameters can be derived from standard tests. The proposed EKF-based algorithm employs the available measurements for the transformer differential protection. The proposed approach, relying on the differential current, can properly deal with the external sources of interference like harmonic excitation and loading. The EKF-based estimator presented is validated by simulation and experimental data. The results verify the ability of the proposed approach to robustly estimate the GIC level during various operating conditions.@en

Photovoltaic (PV) as one of the most promising energy alternatives brings a set of serious challenges in the operation of the power systems including PV system protection. Accordingly, it has become even more vital to provide reliable protection for the PV generations. To this end, this paper proposes two-stage data-driven methods. In the first stage, a feature selection method, namely t-distributed stochastic neighbor embedding (t-SNE) is implemented to select the optimal features. Then, the output of t-SNE is directly fed into the strong data-driven classification algorithm, namely robust soft learning vector quantization (RSLVQ) to detect PV array fault and identify the fault types in the second stage. The proposed method is able to detect the two different line-to-line faults (in strings and out of strings) and open circuit fault and fault type considering partial shedding effects. The results have been discussed based on simulation results and have been demonstrated the high accuracy and reliability of the proposed two-stage method in detection and fault type identification based on confusion matrix values.@en

Photovoltaic (PV) as one of the most promising energy alternatives brings a set of serious challenges in the operation of the power systems including PV system protection. Accordingly, it has become even more vital to provide reliable protection for the PV generations. To this end, this paper proposes two-stage data-driven methods. In the first stage, a feature selection method, namely t-distributed stochastic neighbor embedding (t-SNE) is implemented to select the optimal features. Then, the output of t-SNE is directly fed into the strong data-driven classification algorithm, namely robust soft learning vector quantization (RSLVQ) to detect PV array fault and identify the fault types in the second stage. The proposed method is able to detect the two different line-to-line faults (in strings and out of strings) and open circuit fault and fault type considering partial shedding effects. The results have been discussed based on simulation results and have been demonstrated the high accuracy and reliability of the proposed two-stage method in detection and fault type identification based on confusion matrix values.@en

The conflicting issues of growing demand for electrical energy versus the environmental concerns have left the energy industries practically with one choice: to turn into renewable energies. This duality has also highlighted the role of power transmission systems as energy delivery links in two ways, considering the increased demand of load centers, and the integration of large-scale renewable generation units connected to the transmission system such as wind power generation. Accordingly, it has become even more vital to provide reliable protection for the power transmission links. The present protection methods are associated with deficiencies e.g., acting based on a predefined threshold, low speed, and the requirement of costly devices. A two-stage data-driven-based methodology has been introduced in this paper to deal with such defects, considering wind power generation. The proposed approach utilizes a powerful feature extraction technique, namely the t-distributed stochastic neighbor embedding (t-SNE) in the first stage. In the second stage, the extracted features are fed to a robust soft learning vector quantization (RSLVQ) classifier to detect and locate transmission line faults. The WSCC 9-bus system is used to evaluate the performance of the proposed data-driven method during various system operating conditions. The obtained results verify the promising capability of the proposed approach in detecting and locating transmission line faults.@en

The conflicting issues of growing demand for electrical energy versus the environmental concerns have left the energy industries practically with one choice: to turn into renewable energies. This duality has also highlighted the role of power transmission systems as energy delivery links in two ways, considering the increased demand of load centers, and the integration of large-scale renewable generation units connected to the transmission system such as wind power generation. Accordingly, it has become even more vital to provide reliable protection for the power transmission links. The present protection methods are associated with deficiencies e.g., acting based on a predefined threshold, low speed, and the requirement of costly devices. A two-stage data-driven-based methodology has been introduced in this paper to deal with such defects, considering wind power generation. The proposed approach utilizes a powerful feature extraction technique, namely the t-distributed stochastic neighbor embedding (t-SNE) in the first stage. In the second stage, the extracted features are fed to a robust soft learning vector quantization (RSLVQ) classifier to detect and locate transmission line faults. The WSCC 9-bus system is used to evaluate the performance of the proposed data-driven method during various system operating conditions. The obtained results verify the promising capability of the proposed approach in detecting and locating transmission line faults.@en

The conflicting issues of growing demand for electrical energy versus the environmental concerns have left the energy industries practically with one choice: to turn into renewable energies. This duality has also highlighted the role of power transmission systems as energy delivery links in two ways, considering the increased demand of load centers, and the integration of large-scale renewable generation units connected to the transmission system such as wind power generation. Accordingly, it has become even more vital to provide reliable protection for the power transmission links. The present protection methods are associated with deficiencies e.g., acting based on a predefined threshold, low speed, and the requirement of costly devices. A two-stage data-driven-based methodology has been introduced in this paper to deal with such defects, considering wind power generation. The proposed approach utilizes a powerful feature extraction technique, namely the t-distributed stochastic neighbor embedding (t-SNE) in the first stage. In the second stage, the extracted features are fed to a robust soft learning vector quantization (RSLVQ) classifier to detect and locate transmission line faults. The WSCC 9-bus system is used to evaluate the performance of the proposed data-driven method during various system operating conditions. The obtained results verify the promising capability of the proposed approach in detecting and locating transmission line faults.@en

The conflicting issues of growing demand for electrical energy versus the environmental concerns have left the energy industries practically with one choice: to turn into renewable energies. This duality has also highlighted the role of power transmission systems as energy delivery links in two ways, considering the increased demand of load centers, and the integration of large-scale renewable generation units connected to the transmission system such as wind power generation. Accordingly, it has become even more vital to provide reliable protection for the power transmission links. The present protection methods are associated with deficiencies e.g., acting based on a predefined threshold, low speed, and the requirement of costly devices. A two-stage data-driven-based methodology has been introduced in this paper to deal with such defects, considering wind power generation. The proposed approach utilizes a powerful feature extraction technique, namely the t-distributed stochastic neighbor embedding (t-SNE) in the first stage. In the second stage, the extracted features are fed to a robust soft learning vector quantization (RSLVQ) classifier to detect and locate transmission line faults. The WSCC 9-bus system is used to evaluate the performance of the proposed data-driven method during various system operating conditions. The obtained results verify the promising capability of the proposed approach in detecting and locating transmission line faults.@en

The conflicting issues of growing demand for electrical energy versus the environmental concerns have left the energy industries practically with one choice: to turn into renewable energies. This duality has also highlighted the role of power transmission systems as energy delivery links in two ways, considering the increased demand of load centers, and the integration of large-scale renewable generation units connected to the transmission system such as wind power generation. Accordingly, it has become even more vital to provide reliable protection for the power transmission links. The present protection methods are associated with deficiencies e.g., acting based on a predefined threshold, low speed, and the requirement of costly devices. A two-stage data-driven-based methodology has been introduced in this paper to deal with such defects, considering wind power generation. The proposed approach utilizes a powerful feature extraction technique, namely the t-distributed stochastic neighbor embedding (t-SNE) in the first stage. In the second stage, the extracted features are fed to a robust soft learning vector quantization (RSLVQ) classifier to detect and locate transmission line faults. The WSCC 9-bus system is used to evaluate the performance of the proposed data-driven method during various system operating conditions. The obtained results verify the promising capability of the proposed approach in detecting and locating transmission line faults.@en

The conflicting issues of growing demand for electrical energy versus the environmental concerns have left the energy industries practically with one choice: to turn into renewable energies. This duality has also highlighted the role of power transmission systems as energy delivery links in two ways, considering the increased demand of load centers, and the integration of large-scale renewable generation units connected to the transmission system such as wind power generation. Accordingly, it has become even more vital to provide reliable protection for the power transmission links. The present protection methods are associated with deficiencies e.g., acting based on a predefined threshold, low speed, and the requirement of costly devices. A two-stage data-driven-based methodology has been introduced in this paper to deal with such defects, considering wind power generation. The proposed approach utilizes a powerful feature extraction technique, namely the t-distributed stochastic neighbor embedding (t-SNE) in the first stage. In the second stage, the extracted features are fed to a robust soft learning vector quantization (RSLVQ) classifier to detect and locate transmission line faults. The WSCC 9-bus system is used to evaluate the performance of the proposed data-driven method during various system operating conditions. The obtained results verify the promising capability of the proposed approach in detecting and locating transmission line faults.@en

The conflicting issues of growing demand for electrical energy versus the environmental concerns have left the energy industries practically with one choice: to turn into renewable energies. This duality has also highlighted the role of power transmission systems as energy delivery links in two ways, considering the increased demand of load centers, and the integration of large-scale renewable generation units connected to the transmission system such as wind power generation. Accordingly, it has become even more vital to provide reliable protection for the power transmission links. The present protection methods are associated with deficiencies e.g., acting based on a predefined threshold, low speed, and the requirement of costly devices. A two-stage data-driven-based methodology has been introduced in this paper to deal with such defects, considering wind power generation. The proposed approach utilizes a powerful feature extraction technique, namely the t-distributed stochastic neighbor embedding (t-SNE) in the first stage. In the second stage, the extracted features are fed to a robust soft learning vector quantization (RSLVQ) classifier to detect and locate transmission line faults. The WSCC 9-bus system is used to evaluate the performance of the proposed data-driven method during various system operating conditions. The obtained results verify the promising capability of the proposed approach in detecting and locating transmission line faults.@en