Comprehensive understanding of particle motion in microfluidic devices is essential to unlock additional technologies for shape-based separation and sorting of microparticles like microplastics, cells, and crystal polymorphs. Such particles interact hydrodynamically with confining surfaces, thus altering their trajectories. These hydrodynamic interactions are shape dependent and can be tuned to guide a particle along a specific path. We produce strongly confined particles with various shapes in a shallow microfluidic channel via stop flow lithography. Regardless of their exact shape, particles with a single mirror plane have identical modes of motion: in-plane rotation and cross-stream translation along a bell-shaped path. Each mode has a characteristic time, determined by particle geometry. Furthermore, each particle trajectory can be scaled by its respective characteristic times onto two master curves. We propose minimalistic relations linking these timescales to particle shape. Together these master curves yield a trajectory universal to particles with a single mirror plane.@en

We derive general equations of motions for highly-confined particles that perform quasi-two-dimensional motion in Hele-Shaw channels, which we solve analytically, aiming to derive design principles for self-steering particles. Based on symmetry properties of a particle, its equations of motion can be simplified, where we retrieve an earlier-known equation of motion for the orientation of dimer particles consisting of disks (Uspal et al 2013 Nat. Commun. 4), but now in full generality. Subsequently, these solutions are compared with particle trajectories that are obtained numerically. For mirror-symmetric particles, excellent agreement between the analytical and numerical solutions is found. For particles lacking mirror symmetry, the analytic solutions provide means to classify the motion based on particle geometry, while we find that taking the side-wall interactions into account is important to accurately describe the trajectories.@en

We combine theory and numerical calculations to accurately predict the motion of anisotropic particles in shallow microfluidic channels, in which the particles are strongly confined in the vertical direction. We formulate an effective quasi-two-dimensional description of the Stokes flow around the particle via the Brinkman equation, which can be solved in a time that is two orders of magnitude faster than the three-dimensional problem. The computational speedup enables us to calculate the full trajectories of particles in the channel. To validate our scheme, we study the motion of dumbbell-shaped particles that are produced in a microfluidic channel using ‘continuous-flow lithography’. Contrary to what was reported in earlier work (Uspal et al. in Nat Commun 4:2666, 2013), we find that the reorientation time of a dumbbell particle in an external flow exhibits a minimum as a function of its disk size ratio. This finding is in excellent agreement with new experiments, thus confirming the predictive power of our scheme.@en

We present experimental and theoretical results on suspensions of silica rods in DMSO-water, subjected to an applied electric field. The experimental results indicate that, if the electrode used for generating the electric field is in direct contact with the suspension, a fraction of the rods close to the electrode surface does not stand parallel to the field but instead lies flat on the electrode when the field is switched on. To explain these results theoretically, we modify the coupled dipole method to include “image dipoles”, and find that a rod close to the electrode experiences not only the expected global potential energy minimum at an orientation parallel to the electric field, but also a local minimum several times the thermal energy in depth for orientations parallel to the electrode surface. Additionally, we indicate how the magnitude of the potential energy depends on the electric field strength and include results not only for negatively polarizable (which correspond to the aforementioned experimental system), but also for positively polarizable rods.@en

We present experimental and theoretical results on suspensions of silica rods in DMSO-water, subjected to an applied electric field. The experimental results indicate that, if the electrode used for generating the electric field is in direct contact with the suspension, a fraction of the rods close to the electrode surface does not stand parallel to the field but instead lies flat on the electrode when the field is switched on. To explain these results theoretically, we modify the coupled dipole method to include “image dipoles”, and find that a rod close to the electrode experiences not only the expected global potential energy minimum at an orientation parallel to the electric field, but also a local minimum several times the thermal energy in depth for orientations parallel to the electrode surface. Additionally, we indicate how the magnitude of the potential energy depends on the electric field strength and include results not only for negatively polarizable (which correspond to the aforementioned experimental system), but also for positively polarizable rods.@en

We present experimental and theoretical results on suspensions of silica rods in DMSO-water, subjected to an applied electric field. The experimental results indicate that, if the electrode used for generating the electric field is in direct contact with the suspension, a fraction of the rods close to the electrode surface does not stand parallel to the field but instead lies flat on the electrode when the field is switched on. To explain these results theoretically, we modify the coupled dipole method to include “image dipoles”, and find that a rod close to the electrode experiences not only the expected global potential energy minimum at an orientation parallel to the electric field, but also a local minimum several times the thermal energy in depth for orientations parallel to the electrode surface. Additionally, we indicate how the magnitude of the potential energy depends on the electric field strength and include results not only for negatively polarizable (which correspond to the aforementioned experimental system), but also for positively polarizable rods.@en