Oil palm empty fruit bunch (OPEFB) is an abundant organic waste in Malaysia that is often disposed of through field burning. A previous study has shown that solar-driven steam gasification of OPEFB can produce hydrogen-rich syngas with an energy upgrade factor of 1.2 and a carbon conversion efficiency of 95.1 %. Beyond its potential as a biofuel, OPEFB can also act as a carbon sink, capturing photosynthetically stored carbon. This study explores the potential of amplifying OPEFB's negative carbon emissions through solar-driven gasification, using CO₂ as the gasifying agent. In this work, a Central Composite Design (CCD) approach was employed to assess the influence of temperature (1100–1300 °C) and CO₂/OPEFB molar ratio (1.6–3.0) on H₂/CO molar ratio and energy upgrade factor, with a constant OPEFB flow rate of 1.8 g/min. The results demonstrated that at an energy upgrade factor of 1.4, 94.9 % of the total carbon was converted into syngas with a H₂/CO molar ratio of 0.3. The maximum observed net carbon capture yield of 0.4 g C/g OPEFB was achieved at 1300 °C and a CO₂/OPEFB molar ratio of 3.0. The remaining carbon (94.4–95.7 wt %) was converted into biochar with low heavy metal content, which has potential as a soil enhancer.

Oil palm empty fruit bunch (OPEFB) is an abundant waste that is commonly incinerated, causing environmental pollution. In this study, an alternative waste management approach was investigated to produce value-added syngas from OPEFB using solar steam gasification. The three operating variables were temperature (1100–1300 °C), H₂O/OPEFB molar ratio (1.7–2.9), and OPEFB flowrate (0.8–1.8 g/min). Central composite design (CCD) was conducted to investigate and optimise the effects of these operating variables on H₂/CO molar ratio and solar to fuel energy conversion efficiency (η_{solar to fuel}). The findings revealed that all investigated operating variables were significant. Experimentally, the highest H₂/CO molar ratio (1.6) was obtained at 1300 °C, H₂O/OPEFB molar ratio of 2.9, and OPEFB flowrate of 1.8 g/min, with a high carbon conversion reaching 95.1%. Results from CCD analysis showed that a higher H₂/CO molar ratio (above 1.8) could be reached at 1200 °C, H₂O/OPEFB molar ratio of ≥3.0, and OPEFB flowrate of ≥2.0 g/min. The maximum η_{solar to fuel} of 19.6% was achieved at 1200 °C, H₂O/OPEFB molar ratio of 1.3, and OPEFB flowrate of 1.3 g/min, whereby a favourable energy upgrade factor (1.2) was achieved. The statistical model showed adequacy to predict H₂/CO molar ratio.