Dv
Dirk van der Ploeg
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
2 records found
1
Improving fall from height risk reduction
Creating a safer construction site with the use of BIM technology
Master thesis
(2021)
-
A.C. Ramsey, A.R.M. Wolfert, G.A. van Nederveen, A.C.B. Schuurman, Dirk van der Ploeg
Innovative solutions for safety and risk management on construction sites are required to reduce the amount of accidents that occur globally, as too many occupational accidents still happen in the Architecture, Engineering and Construction industry. A particular problem is the fall from height (FFH) accidents on construction sites, due to failing barriers with the underlying cause of insufficient planning. In previous research it has been suggested to develop dedicated BIM plug-ins to automate and visualise risk identification and evaluation of construction sites as a means to assist the safety management process. To explore the impact of BIM on FFH accident reduction through automation and visualisation, a digital tool prototype is developed. This prototype focusses on fall from height (FFH) identification on construction sites during early project phases of civil engineering projects. It is programmed in Autodesk Dynamo for Revit, based on technical and functional requirements derived from literature and industry professionals. A simulation of the FFH tool prototype has been conducted through a pilot project. The result of this product development is a working fall from height detection prototype that is to be used as a supporting tool during the safety analysis of construction site design in Dutch civil engineering projects. The developed tool is added to the body of products that can be used for digitalisation and innovation within the construction process, where it digitalises part of the safety management process that is otherwise performed manually. The added value of the tool prototype is the addition of automated risk detection, creating support in the design and planning process and providing added information to group discussion on safety matters in risk identification and evaluation meetings. Recommendation for future use of the tool is to implement the FFH tool prototype during the design phase to provide the designer with insights in the safety of the constructability. Additionally, the FFH tool prototype can be implemented by safety managers to use the results during safety meetings for better discussion and evaluation of the construction site. For the implementation, improvement of the level of detail in the 3D models for the projects and including temporary construction site works is essential. For further development it is recommended to focus on improving the import of linked models into the script and developing alternative operations to determine the height differences. More developments and improvements can be made to the script to increase the applicability on more complex projects. Concluding, the FFH tool prototype is considered to bring added value in digitalising an otherwise manual process regarding safety management. It is suggested to incorporate use of the FFH tool prototype in the design and planning process to proactively engage in digitalising and innovating engineering processes.
...
Innovative solutions for safety and risk management on construction sites are required to reduce the amount of accidents that occur globally, as too many occupational accidents still happen in the Architecture, Engineering and Construction industry. A particular problem is the fall from height (FFH) accidents on construction sites, due to failing barriers with the underlying cause of insufficient planning. In previous research it has been suggested to develop dedicated BIM plug-ins to automate and visualise risk identification and evaluation of construction sites as a means to assist the safety management process. To explore the impact of BIM on FFH accident reduction through automation and visualisation, a digital tool prototype is developed. This prototype focusses on fall from height (FFH) identification on construction sites during early project phases of civil engineering projects. It is programmed in Autodesk Dynamo for Revit, based on technical and functional requirements derived from literature and industry professionals. A simulation of the FFH tool prototype has been conducted through a pilot project. The result of this product development is a working fall from height detection prototype that is to be used as a supporting tool during the safety analysis of construction site design in Dutch civil engineering projects. The developed tool is added to the body of products that can be used for digitalisation and innovation within the construction process, where it digitalises part of the safety management process that is otherwise performed manually. The added value of the tool prototype is the addition of automated risk detection, creating support in the design and planning process and providing added information to group discussion on safety matters in risk identification and evaluation meetings. Recommendation for future use of the tool is to implement the FFH tool prototype during the design phase to provide the designer with insights in the safety of the constructability. Additionally, the FFH tool prototype can be implemented by safety managers to use the results during safety meetings for better discussion and evaluation of the construction site. For the implementation, improvement of the level of detail in the 3D models for the projects and including temporary construction site works is essential. For further development it is recommended to focus on improving the import of linked models into the script and developing alternative operations to determine the height differences. More developments and improvements can be made to the script to increase the applicability on more complex projects. Concluding, the FFH tool prototype is considered to bring added value in digitalising an otherwise manual process regarding safety management. It is suggested to incorporate use of the FFH tool prototype in the design and planning process to proactively engage in digitalising and innovating engineering processes.
Master thesis
(2019)
-
Öznur Bozmaz, Hans Bakker, Alexander Koutamanis, Rob Stikkelman, Brigt Rykkje, Dirk van der Ploeg
Many infrastructure projects cope with a cost overrun and time delay due to the lack of effective design change management in case of design changes. To implement these design changes, an effective change process is necessary. This process guides the project team in identifying, documenting, evaluating and managing design change. With this technical tools are needed for implementation of change, namely BIM(Building Information Modelling). By using BIM, assessment is made on whether design changes are feasible and what consequences it may have on planning, costs, re-work, and clashes. However, current knowledge is lacking on how to use BIM when implementing a design change in a project. This research aims to set up a procedure that can be used by the project team for implementing design changes during the execution phase of infrastructural projects. To achieve this objective, the main research question is answered by analysing case studies. Hereby, both qualitative and quantitative analyses are carried out in three cases in the infrastructural field. Both analyses are subdivided into the organisational dimension(for the change process) and technical dimension(use of BIM). For the qualitative part, semi-structured interviews are held with contract managers and BIM managers. For the quantitative part, samples are taken to analyse each project. These samples consisted of all contractual changes in the project that led to a change in the design and which have been implemented after the execution phase has commenced. The results of the literature study and the case studies are used to develop a procedure to be used by the project team in case of design changes during the execution phase of infrastructural projects. By using this procedure, the project team gains a full understanding of how the design change process should proceed and which steps they have to take for effective implementation of design change with using BIM.
...
Many infrastructure projects cope with a cost overrun and time delay due to the lack of effective design change management in case of design changes. To implement these design changes, an effective change process is necessary. This process guides the project team in identifying, documenting, evaluating and managing design change. With this technical tools are needed for implementation of change, namely BIM(Building Information Modelling). By using BIM, assessment is made on whether design changes are feasible and what consequences it may have on planning, costs, re-work, and clashes. However, current knowledge is lacking on how to use BIM when implementing a design change in a project. This research aims to set up a procedure that can be used by the project team for implementing design changes during the execution phase of infrastructural projects. To achieve this objective, the main research question is answered by analysing case studies. Hereby, both qualitative and quantitative analyses are carried out in three cases in the infrastructural field. Both analyses are subdivided into the organisational dimension(for the change process) and technical dimension(use of BIM). For the qualitative part, semi-structured interviews are held with contract managers and BIM managers. For the quantitative part, samples are taken to analyse each project. These samples consisted of all contractual changes in the project that led to a change in the design and which have been implemented after the execution phase has commenced. The results of the literature study and the case studies are used to develop a procedure to be used by the project team in case of design changes during the execution phase of infrastructural projects. By using this procedure, the project team gains a full understanding of how the design change process should proceed and which steps they have to take for effective implementation of design change with using BIM.