NR

Nunzio Russo

info

Please Note

3 records found

Journal article (2019) - M. A. Farkhondehfal, S. Hernández, M. Rattalino, M. Makkee, A. Lamberti, A. Chiodoni, K. Bejtka, A. Sacco, F. C. Pirri, N. Russo
Huge efforts have been done in the last years on electrochemical and photoelectrochemical reduction of CO 2 to offer a sustainable route to recycle CO 2 . A promising route is to electrochemically reduce CO 2 into CO which, by combination with hydrogen, can be used as a feedstock to different added-value products or fuels. Herein, perpendicular oriented TiO 2 nanotubes (NTs) on the electrode plate were grown by anodic oxidation of titanium substrate and then decorated by a low loading of silver nanoparticles deposited by sputtering (i.e. Ag/TiO 2 NTs). Due to their quasi one-dimensional arrangement, TiO 2 NTs are able to provide higher surface area for Ag adhesion and superior electron transport properties than other Ti substrates (e.g. Ti foil and TiO 2 nanoparticles), as confirmed by electrochemical (CV, EIS, electrochemical active surface area) and chemical/morphological analysis (FESEM, TEM, EDS). These characteristics together with the role of the TiO 2 NTs to enhance the stability of CO 2 ·- intermediate formed due to titania redox couple (Ti IV /Ti III ) lead to an improvement of the CO production in the Ag/TiO 2 NTs electrodes. Particular attention has been devoted to reduce the loading of noble metal in the electrode(14.5 %w/%w) and to increase the catalysts active surface area in order to decrease the required overpotential. ...
Journal article (2017) - S. Hernández, M. Amin Farkhondehfal, Francesc Sastre, Michiel Makkee, G. Saracco, Nunzio Russo
The CO2 that comes from the use of fossil fuels accounts for about 65% of the global greenhouse gases emissions, and it plays a critical role in global climate changes. Among the different strategies that have been considered to address the storage and reutilization of CO2, the transformation of CO2 into chemicals or fuels with a high added-value has been considered a winning approach. This transformation is able to reduce the carbon emissions and induce a “fuel switching” that exploits renewable energy sources. The aim of this brief review is to gather and critically analyse the main efforts that have been made and achievements that have been reached in the electrochemical reduction of CO2 for the production of CO. The main focus is on the prospective of exploiting the intrinsic nature of the electrolysis process, in which CO2 reduction and H2 evolution reactions can be combined, into a competitive approach, to produce syngas. Several well-stablished processes already exist for the generation of fuels and fine-chemicals from H2/CO mixtures of different ratios. Hence, the different kinds of electrocatalysts and electrochemical reactors that have been used for the CO and H2 evolution reactions have been analysed, as well as the main factors that influence the performance of the system from the thermodynamic, kinetic and mass transport points of view. ...

Study on the soot oxidation over ceria-based catalysts

Journal article (2016) - Marco Piumetti, Bart van der Linden, Michiel Makkee, Paolo Miceli, Debora Fino, Nunzio Russo, Samir Bensaid
Ceria-based catalysts with different topological and textural properties have been prepared to study the role of the soot-catalyst contact on the soot oxidation reaction. The physico-chemical features of the catalysts have been investigated by means of complementary techniques, such as powder XRD, N2 physisorption at -196 °C, optical microscopy at variable temperature, FESEM, TEM, and thermogravimetric analysis.As a whole, the best catalytic activity has been obtained with the CeO2-nanocubes (denoted to as "Ce-NC") because of their higher intrinsic reactivity. On the other hand, high-surface area materials prepared by the cerium nitrate decomposition (denoted to as "Ce-ND") or hydrothermal route (CeO2-stars, referred to as "Ce-SAS") resulted less effective toward the soot combustion, confirming the surface-sensitivity for this reaction.Moreover, it has been proven a higher dependence of the oxidation activity on the catalyst-to-soot ratio (wt./wt.) for the nanostructured catalyst (Ce-NC) exhibiting the lowest BET specific surface area (SBET = 4 m2 g-1). On the other hand, the accessible (real) surface area, at variance of the BET surface area, seems to play a relevant role for this solid-solid reaction mediated by gas-phase oxygen. ...