Modular multilevel series-parallel converters (MM-SPC) have become a suitable solution to provide higher operating voltages, fault tolerance operation, and reliability at a reduced cost, due to their ability to achieve a simpler internal voltage balance. Therefore, MMSPC is a promising solution for applications where the nominal operating conditions are high voltage levels on the DC side and high current ratings on the AC side of the system. To allow this operation, it is necessary to design the system with parallelization in each phase. Therefore, this article proposes a design that incorporates parallelization in each phases and analyzes the internal cross-circulating current generated due to parallelization. This current creates an unbalance and internal losses in the converter. In order to compensate for the cross-circulating current, two cases are compared: the first one with decoupled inductors in their phases, and the second one with coupled inductors. This way, a comparison is made to determine which case provides greater compensation of the circulating current, allowing for the delivery of a high current at the converter's output with the least possible imbalance and internal losses.@en

This article proposes a novel bipolar-type dc system suitable for both distribution and transmission systems based on modular multilevel series/parallel converters (MMSPCs). The system features decoupled operations of each pole of the bipolar system, being able to operate in both asymmetrical and regenerative modes. This enables two independent dc systems by using a single grid-tied converter. The MMSPC is based on a three-switch cell configuration and enables a simple balancing mechanism in combination with a wide range of output voltage frequencies. The simple balancing mechanism is the key to enable the dc operation and lead to simpler scalability for different voltage levels. Theoretical studies and experimental results are provided to verify and characterize the proposed system. @en

This article proposes a novel bipolar-type dc system suitable for both distribution and transmission systems based on modular multilevel series/parallel converters (MMSPCs). The system features decoupled operations of each pole of the bipolar system, being able to operate in both asymmetrical and regenerative modes. This enables two independent dc systems by using a single grid-tied converter. The MMSPC is based on a three-switch cell configuration and enables a simple balancing mechanism in combination with a wide range of output voltage frequencies. The simple balancing mechanism is the key to enable the dc operation and lead to simpler scalability for different voltage levels. Theoretical studies and experimental results are provided to verify and characterize the proposed system. @en

This article proposes a novel bipolar-type dc system suitable for both distribution and transmission systems based on modular multilevel series/parallel converters (MMSPCs). The system features decoupled operations of each pole of the bipolar system, being able to operate in both asymmetrical and regenerative modes. This enables two independent dc systems by using a single grid-tied converter. The MMSPC is based on a three-switch cell configuration and enables a simple balancing mechanism in combination with a wide range of output voltage frequencies. The simple balancing mechanism is the key to enable the dc operation and lead to simpler scalability for different voltage levels. Theoretical studies and experimental results are provided to verify and characterize the proposed system. @en

This article proposes a novel bipolar-type dc system suitable for both distribution and transmission systems based on modular multilevel series/parallel converters (MMSPCs). The system features decoupled operations of each pole of the bipolar system, being able to operate in both asymmetrical and regenerative modes. This enables two independent dc systems by using a single grid-tied converter. The MMSPC is based on a three-switch cell configuration and enables a simple balancing mechanism in combination with a wide range of output voltage frequencies. The simple balancing mechanism is the key to enable the dc operation and lead to simpler scalability for different voltage levels. Theoretical studies and experimental results are provided to verify and characterize the proposed system. @en

This article proposes a novel bipolar-type dc system suitable for both distribution and transmission systems based on modular multilevel series/parallel converters (MMSPCs). The system features decoupled operations of each pole of the bipolar system, being able to operate in both asymmetrical and regenerative modes. This enables two independent dc systems by using a single grid-tied converter. The MMSPC is based on a three-switch cell configuration and enables a simple balancing mechanism in combination with a wide range of output voltage frequencies. The simple balancing mechanism is the key to enable the dc operation and lead to simpler scalability for different voltage levels. Theoretical studies and experimental results are provided to verify and characterize the proposed system. @en

The use of conventional half-bridge submodules in the Modular Multilevel Converters brings important benefits such as the reduction in the power losses and semiconductor devices. However, the system with half-bridge submodule lacks the capability of blocking DC-faults currents. In this paper, a 5-level submodule with DC-fault blocking capability is presented. The proposed submodule allows to operate with different internal capacitances in order to reduce the cost of the system. Furthermore, a control and balance strategy for the novel 5-level submodule is proposed.@en