Aromatic micropollutants found in wastewater pose threats to human health, and it is necessary to remove them from wastewater. Cyclodextrin hydrogel is one of the most promising environmentally friendly materials for removing aromatic micropollutants from wastewater by means of adsorption. In this study, we have synthesized a cyclodextrin hydrogel designed to simultaneously adsorb a cationic dye (methylene blue, MB) and an endocrine-disrupting compound, EDC (bisphenol A, BPA) and provide insights into the design of adsorbents for multicomponent wastewater purification. Polymeric dextran-poly(acrylic acid)-β-cyclodextrin (Dex-PAA-CD) was prepared by the copolymerization of glycidyl methacrylate (GMA), methacrylate-substituted dextran (Dex-MA), acrylic acid, and vinyl-derivatized β-cyclodextrin (β-CD-MA). The adsorption of MB and BPA by the Dex-PAA-CD hydrogel presented short equilibrium time. The adsorption of MB and BPA was independent of each other, and their adsorption mechanisms were proved to be electronic interaction and cyclodextrin host-guest interaction, respectively. The maximum adsorption capacities of MB and BPA onto Dex-PAA-CD are determined to be 5.60 and 0.144 mmol/g by the Sips isotherm. The Dex-PAA-CD hydrogel retains a high adsorption capacity even after five adsorption/desorption cycles and demonstrates the feasibility of designing reusable adsorbents to remove multiple pollutants from wastewater.

A biocompatible Dex-MA/PAA hydrogel was prepared through copolymerization of glycidyl methacrylate substituted dextran (Dex-MA) with acrylic acid (AA), which was applied as the adsorbent to remove cationic dyes from aqueous solutions. Dex-MA/PAA hydrogel presented a fast adsorption rate and the removal efficiency of Methylene Blue (MB) and Crystal Violet (CV) reached 93.9% and 86.4%, respectively within one minute at an initial concentration of 50 mg L^-1. The adsorption equilibrium data fitted the Sips isotherm model well with high adsorption capacities of 1994 mg g^-1 for MB and 2390 mg g^-1 for CV. Besides, dye adsorption occurred efficiently over the pH range 3-10 and the temperature range 20-60 °C. Moreover, the removal efficiencies for MB and CV were still >95% even after five adsorption/desorption cycles which indicates the robust nature of the Dex-MA/PAA hydrogel and its potential as an eco-friendly adsorbent for water treatment.