Aromatic micropollutants found in wastewater pose threats to human health, and it is necessary to remove them from wastewater. Cyclodextrin hydrogel is one of the most promising environmentally friendly materials for removing aromatic micropollutants from wastewater by means of adsorption. In this study, we have synthesized a cyclodextrin hydrogel designed to simultaneously adsorb a cationic dye (methylene blue, MB) and an endocrine-disrupting compound, EDC (bisphenol A, BPA) and provide insights into the design of adsorbents for multicomponent wastewater purification. Polymeric dextran-poly(acrylic acid)-β-cyclodextrin (Dex-PAA-CD) was prepared by the copolymerization of glycidyl methacrylate (GMA), methacrylate-substituted dextran (Dex-MA), acrylic acid, and vinyl-derivatized β-cyclodextrin (β-CD-MA). The adsorption of MB and BPA by the Dex-PAA-CD hydrogel presented short equilibrium time. The adsorption of MB and BPA was independent of each other, and their adsorption mechanisms were proved to be electronic interaction and cyclodextrin host-guest interaction, respectively. The maximum adsorption capacities of MB and BPA onto Dex-PAA-CD are determined to be 5.60 and 0.144 mmol/g by the Sips isotherm. The Dex-PAA-CD hydrogel retains a high adsorption capacity even after five adsorption/desorption cycles and demonstrates the feasibility of designing reusable adsorbents to remove multiple pollutants from wastewater.@en

In the research of cancer cell invasion and metastasis, recreation of physiologically relevant and faithful three-dimensional (3D) tumor models that recapitulate spatial architecture, spatiotemporal control of cell communication and signaling pathways, and integration of extracellular cues remains an open challenge. Here, a programmable multifunctional 3D cancer cell invasion microbuckets-hydrogel (Mb-H) platform is developed by integrating various function-variable microbuckets and extracellular matrix (ECM)-like hydrogels. Based on this Mb-H micro platform, the aggregation of multi-cancer cells is well controlled to form cancer cell spheroids, and the guiding relationship of single-cell migration and collective cell migration during the epithelial-mesenchymal transition (EMT) of cancer cell invasion are demonstrated. By programming and precisely assembling multiple functions in one system, the Mb-H platform with spatial-temporal controlled release of cytokine transforming growth factor beta (TGF-β) and various functionalized Mb-H platforms with intelligent adjustment of cell-matrix interactions are engineered to coordinate the 3D invasive migration of cancer cell spheroids. This programmable and adaptable 3D cancer cell invasion micro platform takes a new step toward mimicking the dynamically changing (localized) tumor microenvironment and exhibits wide potential applications in cancer research, bio-fabrication, cell signaling, and drug screening.@en

In cancer therapy, the selective targeting of cancer cells while avoiding side effects to normal cells is still full of challenges. Here, we developed dual-functionalized crescent microgels, which selectively captured and killed lung cancer cells in situ without killing other cells. Crescent microgels with the inner surface of the cavity functionalized with antibody and containing glucose oxidase (GOX) in the gel matrix have been produced in a microfluidic device. These microgels presented high affinity and good selectivity to lung cancer cells and retained them inside the cavities for extended periods of time. Exposing the crescent hydrogels to physiological concentrations of glucose leads to the production of a locally high concentration of H2O2 inside the microgels’ cavities, due to the catalytic action by GOX inside the gel matrix, which selectively killed 90 % cancer cells entrapped in the microgel cavities without killing the cells outside. Our strategy to create synergy between different functions by incorporating them in a single microgel presents a novel approach to therapeutic systems, with potentially broad applications in smart materials, bioengineering and biomedical fields.@en

Hydrogel microparticles are important in materials engineering, but their applications remain limited owing to the difficulties associated with their manipulation. Herein, we report the self-orientation of crescent-shaped hydrogel microparticles and elucidate its mechanism. Additionally, the microparticles were used, for the first time, as micro-buckets to carry living cells. In aqueous solution, the microparticles spontaneously rotated to a preferred orientation with the cavity facing up. We developed a geometric model that explains the self-orienting behavior of crescent-shaped particles by minimizing the potential energy of this specific morphology. Finally, we selectively modified the particles’ cavities with RGD peptide and exploited their preferred orientation to load them with living cells. Cells could adhere, proliferate, and be transported and released in vitro. These micro-buckets hold a great potential for applications in smart materials, cell therapy, and biological engineering.@en

Reported here is a 2D, interfacial microcompartmentalization strategy governed by 3D phase separation. In aqueous polyethylene glycol (PEG) solutions doped with biotinylated polymers, the polymers spontaneously accumulate in the interfacial layer between the oil-surfactant-water interface and the adjacent polymer phase. In aqueous two-phase systems, these polymers first accumulated in the interfacial layer separating two polymer solutions and then selectively migrated to the oil-PEG interfacial layer. By using polymers with varying photopolymerizable groups and crosslinking rates, kinetic control and capture of spatial organisation in a variety of compartmentalized macroscopic structures, without the need of creating barrier layers, was achieved. This selective interfacial accumulation provides an extension of 3D phase separation towards synthetic compartmentalization, and is also relevant for understanding intracellular organisation.@en

Introduction of dynamic thiol-alkynone double addition cross-links in a polymer network enable the formation of a self-healing injectable polymer hydrogel. A four-arm polyethylene glycol (PEG) tetra-thiol star polymer is cross-linked by a small molecule alkynone via the thiol-alkynone double adduct to generate a hydrogel network under ambient aqueous conditions (buffer pH = 7.4 or 8.2, room temperature). The mechanical properties of these hydrogels can be easily tuned by varying the concentration of polymer precursors. Through the dynamic thiol-alkynone double addition cross-link, these hydrogels are self-healing and shear thinning, as demonstrated by rheological measurements, macroscopic self-healing, and injection tests. These hydrogels can be injected through a 20G syringe needle and recover after extrusion. In addition, good cytocompatibility of these hydrogels is confirmed by cytotoxicity test. This work shows the application of the thiol-alkynone double addition dynamic covalent chemistry in the straightforward preparation of self-healing injectable hydrogels, which may find future biomedical applications such as tissue engineering and drug delivery.@en

The surface topography of engineered extracellular matrices is one of the most important physical cues regulating the phenotypic polarization of macrophages. However, not much is known about the ways through which submicron (i.e., 100-1000 nm) topographies modulate the polarization of macrophages. In the context of bone tissue regeneration, it is well established that this range of topographies stimulates the osteogenic differentiation of stem cells. Since the immune response affects the bone tissue regeneration process, the immunomodulatory consequences of submicron patterns should be studied prior to their clinical application. Here, we 3D printed submicron pillars (using two-photon polymerization technique) with different heights and interspacings to perform the first ever systematic study of such effects. Among the studied patterns, the highest degree of elongation was observed for the cells cultured on those with the tallest and densest pillars. After 3 days of culture with inflammatory stimuli (LPS/IFN-γ), sparsely decorated surfaces inhibited the expression of the pro-inflammatory cellular marker CCR7 as compared to day 1 and to the other patterns. Furthermore, sufficiently tall pillars polarized the M1 macrophages towards a pro-healing (M2) phenotype, as suggested by the expression of CD206 within the first 3 days. As some of the studied patterns are known to be osteogenic, the osteoimmunomodulatory capacity of the patterns should be further studied to optimize their bone tissue regeneration performance.@en

A biocompatible Dex-MA/PAA hydrogel was prepared through copolymerization of glycidyl methacrylate substituted dextran (Dex-MA) with acrylic acid (AA), which was applied as the adsorbent to remove cationic dyes from aqueous solutions. Dex-MA/PAA hydrogel presented a fast adsorption rate and the removal efficiency of Methylene Blue (MB) and Crystal Violet (CV) reached 93.9% and 86.4%, respectively within one minute at an initial concentration of 50 mg L-1. The adsorption equilibrium data fitted the Sips isotherm model well with high adsorption capacities of 1994 mg g-1 for MB and 2390 mg g-1 for CV. Besides, dye adsorption occurred efficiently over the pH range 3-10 and the temperature range 20-60 °C. Moreover, the removal efficiencies for MB and CV were still >95% even after five adsorption/desorption cycles which indicates the robust nature of the Dex-MA/PAA hydrogel and its potential as an eco-friendly adsorbent for water treatment.@en

The commercial uptake of lithium-sulfur (Li-S) batteries is undermined by their rapid performance decay and short cycle life. These problems originate from the dissolution of lithium polysulfide in liquid electrolytes, causing charge and active material to shuttle between electrodes. The dynamics of intractable polysulfide migration at different length scales often tend to escape the probing ability of many analytical techniques. Spatial and temporal visualization of Li in Li-S electrodes and direct mechanistic understanding of how polysulfides are regulated across Li-S batteries starting from current collector and active layer coating to electrode-electrolyte interface are still lacking. To address this we employ neutron depth profiling across Li-S electrodes using the naturally occurring isotope, 6Li, which yields direct spatial information on Li-S electrochemistry. Using three types of Li-S electrodes, namely, carbon-sulfur, carbon-sulfur with 10% lithium titanium oxide (LTO), and carbon-sulfur with LTO membrane, we provide direct evidence for the migration, adsorption, and confinement of polysulfides in Li-S cells at work. Our findings further provide insights into the dynamics of polysulfide dissolution and re-utilization in relation to Li-S battery capacity and longevity to aid rational electrode designs toward high-energy, safe, and low-cost batteries.@en