A revision of the popular equation of Richardson and Zaki (1954a, Transactions of the Institute of Chemical Engineering, 32, 35–53) for the hindered settling of suspensions of non-cohesive particles in fluids is proposed, based on 548 data sets from a broad range of scientific disciplines. The new hindered settling equation enables predictions of settling velocity for a wide range of particle sizes and densities, and liquid densities and viscosities, but with a focus on sediment particles in water. The analysis of the relationship between hindered settling velocity and particle size presented here shows that the hindered settling effect increases as the particle size decreases, for example, a 50% reduction in settling velocity is reached for 0.025 mm silt and 4 mm pebbles at particle concentrations of 13% and 25% respectively. Moreover, hindered settling starts to influence the settling behaviour of sediment particles at volumetric concentrations of merely a few per cent. For example, the particle settling velocity in flows that carry 5% silt is reduced by at least 22%. These observations suggest that hindered settling greatly increases the efficiency of natural flows to transport sediment particles, but also particulate carbon and pollutants, such as plastics, over large distances.

The sea floor of intraslope minibasins on passive continental margins plays a significant role in controlling turbidity current pathways and the resulting sediment distribution. To address this, laboratory analogue modelling of intraslope minibasin formation is combined with numerical flow simulations of multi-event turbidity currents. This approach permits an improved understanding of evolving flow–bathymetry–deposit interactions and the resulting internal stacking patterns of the infills of such minibasins. The bathymetry includes a shelf to slope channel followed by an upper minibasin, which are separated by a confining ridge from two lower minibasins that compares well with analogous bathymetries reported from natural settings. From a wider range of numerical flow experiments, a series of 100 consecutive flows is reported in detail. The turbidity currents are released into the channel and upon reaching the upper minibasin follow a series of stages from short initial ponding, ‘filling and spilling’ and an extended transition to long retrogradational ponding. Upon reaching the upper minibasin floor, the currents undergo a hydraulic jump and therefore much sediment is deposited in the central part of the minibasin and the counterslope. This modifies the bathymetry such that in the fill and spill stage, flow stripping and grain-size partitioning cause some finer sediment to be transported across the confining ridge into the lower minibasins. Throughout the basin infill process, the sequences retrograde upstream, accompanied by lateral switching into locally formed depressions in the upper minibasin. After the fill and spill stage, significant deposition occurs in the channel where retrograding cyclic steps with wavelengths of 1 to 2 km develop as a function of pulsating flow criticality. These results are at variance with conventional schemes that emphasize sequential downstream minibasin filling through ponding dominated by vertical aggradation. Comparison of these results with published field and experimental examples provides support for the main conclusions.

The morphological evolution of submarine channel systems can be documented using high-resolution three-dimensional seismic data sets. However, these studies provide limited information on the distribution of sedimentary facies within channel fills, channelscale stacking patterns, or the detailed stratigraphic relationship with adjacent levee-overbank deposits. Seismic-scale outcrops of unit C2 in the Permian Fort Brown Formation, Karoo Basin, South Africa, on two subparallel fold limbs comprise thin-bedded successions, interpreted as external levee deposits, which are adjacent to channel complexes, with constituent channels filled with thick-bedded structureless sandstones, thinner-bedded channel margin facies, and internal levee deposits. Research boreholes intersect all these deposits, to link sedimentary facies and channel stacking patterns identified in core and on image logs and detailed outcrop correlation panels. Key characteristics, including depth of erosion, stacking patterns, and cross-cutting relationships, have been constrained, allowing paleogeographic reconstruction of six channel complexes in a 36-km² (14-mi²) area. The system evolved from an early, deeply incised channel complex, through a series of external levee-confined and laterally stepping channel complexes culminating in an aggradational channel complex confined by both internal and external levees. Down-dip divergence of six channel complexes from the same location suggests the presence of a unique example of an exhumed deep-water avulsion node. Down-dip, external levees are supplied by flows that escaped fromchannel complexes of different ages and spatial positions and are partly confined and share affinities with internal levee successions. The absence of frontal lobes suggests that the channels remained in sand bypass mode immediately after avulsion.