Driving simulators aim to replicate real-world vehicle experiences by recreating accelerations acting on occupants using a combination of translational accelerations and tilt-coordination. Due to space constraints, translational accelerations alone are insufficient, and platform tilting generates additional gravitational forces to enhance realism. However, ensuring the tilt motion remains imperceptible is critical to maintaining immersion.
Model Predictive Control-based motion cueing algorithms demonstrate superior specific force tracking and platform workspace utilization. Despite these benefits, MPC algorithms can exhibit pre-positioning, a phenomenon where the platform tilts prematurely in anticipation of future motion, causing perceptible false cues that disrupt immersion. This phenomenon is particularly noticeable in tilt-coordination due to sustained specific forces.
This work proposes a solution to mitigate pre-positioning by introducing a dynamic scaling factor for tilt-coordination. By scaling down the reference signal for tilt coordination, it stays within the simulator’s tilt angle and tilt-rate capabilities, and platform tilt rates are kept below human perception thresholds. The scaling factor is derived from two key parameters: the maximum specific force generated by platform tilt and the tilt rate perception threshold. The reference for specific force is unscaled to optimally use the translational workspace.
This approach enhances driving simulator realism by minimizing the perceptibility of pre-positioning while optimizing specific force recreation. Subjective evaluations also indicate improved immersion, illustrating the effectiveness of the scenario-adaptive Autoscaling MCA.

Model predictive control (MPC) is a promising technique for motion cueing in driving simulators, but its high computation time limits widespread real-time application. This paper proposes a hybrid algorithm that combines filter-based and MPC-based techniques to improve specific force tracking while reducing computation time. The proposed algorithm divides the reference acceleration into low-frequency and high-frequency components. The high-frequency component serves as a reference for translational motion to avoid workspace limit violations, while the low-frequency component is for tilt coordination. The total acceleration serves as a reference for combined specific force with the highest priority to enable compensation of deviations from its reference values. The algorithm uses constraints in the MPC formulation to account for workspace limits and workspace management is applied. The investigated scenarios were a step signal, a multi-sine wave and a recorded real-drive slalom maneuver. Based on the conducted simulations, the algorithm produces approximately 15% smaller root means squared error (RMSE) for the step signal compared to the state-of-the-art. Around 16% improvement is observed when the real-drive scenario is used as the simulation scenario, and for the multi-sine wave, 90% improvement is observed. At higher prediction horizons the algorithm matches the performance of a state-of-the-art MPC-based motion cueing algorithm. Finally, for all prediction horizons, the frequency-splitting algorithm produced faster results. The pre-generated references reduce the required prediction horizon and computational complexity while improving tracking performance. Hence, the proposed frequency-splitting algorithm outperforms state-of-the-art MPC-based algorithm and offers promise for real-time application in driving simulators.

Driving simulators have been used in the automotive industry for many years because of their ability to perform tests in a safe, reproducible and controlled immersive virtual environment. The improved performance of the simulator and its ability to recreate in-vehicle experience for the user is established through motion cueing algorithms (MCA). Such algorithms have constantly been developed with model predictive control (MPC) acting as the main control technique. Currently, available MPC-based methods either compute the optimal controller online or derive an explicit control law offline. These approaches limit the applicability of the MCA for real-time applications due to online computational costs and/or offline memory storage issues. This research presents a solution to deal with issues of offline and online solving through a hybrid approach. For this, an explicit MPC is used to generate a look-up table to provide an initial guess as a warm-start for the implicit MPC-based MCA. From the simulations, it is observed that the presented hybrid approach is able to reduce online computation load by shifting it offline using the explicit controller. Further, the algorithm demonstrates a good tracking performance with a significant reduction of computation time in a complex driving scenario using an emulator environment of a driving simulator.

Modern Advanced Driver Assistance Systems (ADAS) are limited in their ability to consider the driver's intention, resulting in unnatural guidance and low customer acceptance. In this research, we focus on a novel data-driven approach to predict driver steering torque. In particular, driver behavior is modeled by learning the parameters of a Hidden Markov Model (HMM) and estimation is performed with Gaussian Mixture Regression (GMR). An extensive parameter selection framework enables us to objectively select the model hyper-parameters and prevents overfitting. The final model behavior is optimized with a cost function balancing between accuracy and smoothness. Naturalistic driving data covering seven participants is obtained using a static driving simulator at Toyota Motor Europe for the training, evaluation, and testing of the proposed model. The results demonstrate that our approach achieved a 92% steering torque accuracy with a 37% increase in signal smoothness and 90% fewer data compared to a baseline. In addition, our model captures the complex and nonlinear human behavior and inter-driver variability from novice to expert drivers, showing an interesting potential to become a steering performance predictor in future user-oriented ADAS.