As new offshore wind development sites move further from shore and existing sites enter their post-subsidy operating period, it is expected that operational expenditure (OpEx) will increase. In order to overcome these challenges, a more flexible and cost-effective maintenance solution is needed. One such solution is opportunistic maintenance (OM). This work provides an overview of the maintenance strategy used within other industries before providing an in-depth review of the work specific to offshore wind. The existing literature fails to agree on the specific definition of the term. This work proposes an all-encompassing definition of the term, reviewing maintenance ‘opportunities’ and their corresponding ‘action/response’. The review found that maintenance opportunities are either internal or weather-based, with each opportunity having a pre-determined trigger/response. This work proposes the introduction of a market-based opportunity, which has not been previously considered. As offshore wind farms now face increasing curtailment and negative pricing threats, this new OM framework, OM+, view these periods as maintenance opportunities. OM+ also provides a new definition for recording and reporting availability — moving from time/energy-based availability to market-based availability.@en

The upscaling of wind turbines results in fewer units per installed MW reducing infrastructure and maintenance costs of offshore wind farms. Multi rotor systems (MRS), comprising many wind turbine rotors on a single support structure, are potentially a means to maximize the upscaling benefit in achieving larger unit capacities than is feasible or economic with the conventional, 3-bladed horizontal axis wind turbine (HAWT). The MRS has an inherent upscaling advantage which, for a system with many rotors compared to a single rotor, reduces the total weight and cost of rotor-nacelle assemblies by a large factor. An innovative MRS design is presented based on vertical axis wind turbine (VAWT) rotors of the 2-bladed, H-type. Many disadvantages of VAWT design compared to HAWT in a single rotor system (reduced power performance and higher drive train torque, for example) are resolved in the MRS configuration. In addition, reduced component number and simpler components is advantageous for reliability and O&M cost. This MRS concept has many synergies arising from the choice of VAWT rotors. Results comprise a high-level evaluation of system characteristics and the first stage of more detailed investigation of aerodynamics of the high aspect ratio VAWT. @en