The importance of taking into account geometric imperfections for cylindrical and conical thin-walled structures in buckling had been already recognized a long time ago. Nowadays, the designers still use empirically based lower-bound methods such as the NASA SP-8007 guideline to calculate the required knock-down factors (KDFs). New design approaches that allow taking full advantage of using composite materials are required. The single perturbation load approach (SPLA), a new deterministic approach developed by Hühne for cylindrical shells, will be investigated with unstiffened composite conical structures. The SPLA's capability for predicting KDF is compared with the NASA approach. The SPLA was applied to perfect conical shells with different semi-vertex angles, and three different positions of the perturbation load were considered. The study contributes to the European Union (EU) project DESICOS, whose aim is to develop less conservative design guidelines for imperfection sensitive thin-walled composite structures.@en

Thin-walled cylindrical composite shell structures can be applied in space applications, looking for lighter and cheaper launcher transport system. These structures are prone to buckling under axial compression and may exhibit sensitivity to geometrical imperfections. Today the design of such structures is based on NASA guidelines from the 1960’s using a conservative lower bound curve generated from a database of experimental results. In this guideline the structural behavior of composite materials may not be appropriately considered since the imperfection sensitivity and the buckling load of shells made of such materials depend on the lay-up design. It is clear that with the evolution of the composite materials and fabrication processes this guideline must be updated and / or new design guidelines investigated. This need becomes even more relevant when cutouts are introduced to the structure, which are commonly necessary to account for access points and to provide clearance and attachment points for hydraulic and electric systems. Therefore, it is necessary to understand how a cutout with different dimensions affects the buckling load of a thin-walled cylindrical shell structure in combination with other initial geometric imperfections. In this context, this paper present some observations regarding the buckling load behavior vs. cutout size and radius over thickness ratio, of laminated composite curved panels and cylindrical shells, that could be applied in further recommendations, to allow identifying when the buckling of the structure is dominated by the presence of the cutout or by other initial imperfections.@en

The important role of geometric imperfections on the decrease of the buckling load for thin-walled cylinders had been recognized already by the first authors investigating the theoretical approaches on this topic. However, there are currently no closed-form solutions to take imperfections into account already during the early design phases, forcing the analysts to use lower-bound methods to calculate the required knock-down factors (KDF). Lower-bound methods such as the empirical NASA SP-8007 guideline are commonly used in the aerospace and space industries, while the approaches based on the Reduced Stiffness Method (RSM) have been used mostly in the civil engineering field. Since 1970s a considerable number of experimental and numerical investigations have been conducted to develop new stochastic and deterministic methods for calculating less conservative KDFs. Among the deterministic approaches, the single perturbation load approach (SPLA), proposed by Hühne, will be further investigated for axially compressed fiber composite cylindrical shells and compared with four other methods commonly used to create geometric imperfections: linear buckling mode-shaped, geometric dimples, axisymmetric imperfections and measured geometric imperfections from test articles. The finite element method using static analysis with artificial damping is used to simulate the displacement controlled compression tests up to the post-buckled range of loading. The implementation of each method is explained in details and the different KDFs obtained are compared. The study is part of the European Union (EU) project DESICOS, whose aim is to combine stochastic and deterministic approaches to develop less conservative guidelines for the design of imperfection sensitive structures.@en

Some of the knock-down factors applied in design of rocket launcher structures are based on design recommendations which rely on lower-bound curves from experimental data. The best known example is the NASA guideline SP 8007, published in 1965 and revised in 1968, which is applied for cylindrical structures in the space industry. This guideline is based on test data, computational methods and resources from the 1930-1960's. At that time the application of less empirical methods for the design of actual cylindrical shells could not count with the current computational power, and the available methods led to quite large discrepancies between experiments and test observations. Significant improvement on the available analyses approaches and manufacturing techniques since 1960's have not been taken into account in design processes using the NASA SP-8007, and many authors have recognized that for the current standards this guideline is leading to conservative structures. Another aspect for attention regarding application of the NASA SP-8007 for composite shells is that it does not consider the laminate stacking sequence. Moreover, physical observations regarding how does the imperfection sensitivity of unstiffened cylindrical shells change with the presence of an induced geometric imperfection have also suggested that the current applied design rules are too conservative. This conservativeness is confirmed by many tests carried out recently. This study presents an overview of the problem and a detailed description of the physical observations regarding the buckling mechanism of the thin shells under consideration. It is discussed how these observations can be used for less conservative, laminate dependent, knock-down factors accounting for geometric imperfections. The single perturbation load approach is studied in detail and a physically based definition for the minimum perturbation load (P1) is given, paving the way for the development of semi-analytical methods to calculate this minimum perturbation load.@en

Currently, imperfection sensitive shell structures prone to buckling are designed according to the NASA SP-8007 guideline, from 1968, using its conservative lower bound curve. In this guideline the structural behavior of composite materials is not appropriately considered, since the imperfection sensitivity and the buckling load of shells made of such materials depend on the lay-up design. In this context a numerical investigation about the different methodologies to characterize the behavior of imperfection sensitive composite structures subjected to compressive loads up to buckling is presented in this paper. A comparative study is addressed between a new methodology, called "Single Perturbation Load Approach", adopted by the European project DESICOS, and some classical approaches such as non-linear analyses considering geometric and thickness imperfection obtained from real measurements. An extension of the Single Perturbation Load Approach called "Multiple Perturbation Load Approach" is also introduced in this paper to investigate if one perturbation load is enough to create the worst geometrical imperfection case.The aim of this work is to validate these numerical methodologies with experimental results and point out their limitation, advantage and disadvantage, to calculate less conservative knock-down factors than the obtained with the NASA SP-8007 guideline for unstiffened composite cylinders.@en

The importance of taking into account geometric imperfections for cylindrical and conical thin-walled structures prone to buckling had been already recognized by the first authors dealing with new formulations. Nowadays, the analysts still use empirically based lower-bound methods such as the NASA SP-8007 guideline to calculate the required knock-down factors (KDFs), which does include important mechanical properties of laminated composite materials, such as the stacking sequence. New design approaches that allow taking full advantage of composite materials are required. The single perturbation load approach (SPLA), a new deterministic approach first proposed by Hühne, will be investigated with unstiffened composite conical structures varying the geometry, lamina and layup. The SPLA's capability for predicting KDF is compared with the NASA approach. The SPLA was applied to the geometrically perfect structures and to the structure with geometric imperfections of two types, mid-surface imperfections and thickness imperfections. The study contributes to the European Union (EU) project DESICOS, whose aim is to develop less conservative design guidelines for imperfection sensitive thin-walled structures.@en