Submerged and external anaerobic dynamic membrane bioreactors (AnDMBRs) have been compared in terms of removal efficiency, filtration characteristics and microbial community structure. High COD removal efficiencies were obtained with both submerged and external AnDMBRs. To obtain an effective dynamic membrane (DM) layer enabling high quality permeate, longer time was required in the external AnDMBR configuration compared to the submerged one. A difference in microbial community structure was identified using pyrosequencing analyses between the submerged and external AnDMBRs. The number of archaeal types decreased in the bulk sludge of the external AnDMBR. External sludge recirculation might have had a negative effect on the archaeal community in the bulk sludge of the external AnDMBR. However, the sludge recirculation in the external AnDMBR configuration led to a filtration at lower total filtration resistance and TMP in comparison to the submerged one at the same gas sparging rate. Results showed that the submerged AnDMBR system can provide a shorter start-up period, slightly better permeate quality in terms of COD concentration, and higher biogas production in comparison to the external one in gas-lift mode.

A laboratory scale external anaerobic dynamic membrane bioreactor (AnDMBR) treating high strength wastewater (influent COD ≈ 20 g/L) was operated to assess the effect of biogas sparging velocity (GSV) and hydraulic retention time (HRT) on removal efficiency and dynamic membrane (DM) filtration characteristics. An increase in GSV resulted in a decrease in DM filtration resistance. DM or cake layer was identified as the main contributor to the total filtration resistance. The external AnDMBR achieved over 99% COD removal efficiency irrespective of the GSV. The results showed that the DM formation process proceeded until a stable cake layer was reached. Reducing of HRT resulted in an increase in protein/carbohydrate ratio in soluble microbial products (SMP) and an increase in biomass concentration in the bioreactor. Therefore, HRT affected TMP and total filtration resistance in the AnDMBR. A high permeate quality was obtained by an effective DM layer at organic loading rates (OLRs) between 2 and 3.6 kg COD/m³ d. Based on the fluxes observed in this research, the filter cloth costs would be in the range of 0.17 €/m³ of treated wastewater. The investment and operational costs of the AnDMBRs are expected to be substantially lower than that of conventional membrane filtration.