In previous work, the importance of taking the time-domain into account when studying corrosion inhibitor-containing electrochemical systems was highlighted. In this work, odd random phase electrochemical impedance spectroscopy (ORP-EIS) is applied as the electrochemical tool to study the time-effect by the evaluation of the non-stationarities per frequency decade over time for the screening of different silica- and phosphate- based corrosion inhibitors for hot-dip galvanized steel and possible corrosion inhibitor synergism. This serves as the basis for the interpretation of the results obtained from different macroscopic electrochemical techniques such as potentiodynamic polarization (PP), open circuit potential (OCP) with superimposed linear polarization resistance (LPR), electrochemical impedance spectroscopy (EIS) and electrochemical noise (EN) measurements. The analysis of the time-domain shows that all systems have a system-specific ‘stabilization’ time which affects the interpretation of the results obtained from the macroscopic electrochemical techniques. Furthermore, these results indicate that all corrosion inhibitors tested exhibit corrosion protective action and that the combination of both silica-based corrosion inhibitors show synergistic action on hot-dip galvanized steel.@en

In this paper, different macroscopic electrochemical techniques are applied to study the corrosion inhibitor efficiency, protection mechanism and stability of a calcium aluminum polyphosphate silicate hydrate inhibitor on hot-dip galvanized steel in the time-domain. Potentiodynamic polarization (PP) measurements are applied to study the anodic and cathodic mechanistic behavior as well as inhibitor efficiencies at discrete and single times of exposure. Open circuit potential (OCP) with superimposed linear polarization resistance (LPR) measurements are applied as a faster, non-invasive alternative to PP, characterizing the overall performance of the system in terms of the polarization resistance. Electrochemical impedance spectroscopy (EIS) measurements are applied to detail both the overall performance of the system as well as the corrosion inhibition mechanism related to the electrochemical system’s physicochemical representation over time. Electrochemical noise (EN) measurement are used to evaluate the inhibition efficiency as a function of exposure time, represented by the electrochemical noise resistance. Odd random phase electrochemical impedance spectroscopy (ORP-EIS) is selected as the electrochemical tool to study the system’s instability, by evaluation of the non-linearities and non-stationarities over time. The non-stationarities present in the inhibitor-containing electrochemical system are shown to cause the overall instability of the system and should be taken into account when interpreting results from the different techniques over time.@en