Cryogenic electron microscopy (cryoEM) has become an indispensable technique for determining the structures of isolated biological macromolecules and imaging biomolecular structures within cells. While thin films of frozen-hydrated macromolecule suspensions can be directly prepared and imaged, these molecules must be extracted from their cellular context using existing sample preparation methods. On the other hand, cellular specimens preserve the native context, but the region of interest must be sectioned or subjected to focused ion-beam milling at cryogenic temperatures to achieve the necessary thickness for transmission electron imaging. Currently, no method exists for targeted cytoplasmic extraction of a subcellular volume from individual cells for direct vitrification and cryoEM imaging. In this study, a method is presented that addresses this gap. A system has developed that utilizes a force-sensitive microfluidic cantilever pipette to aspirate and dispense sample volumes as small as 204 fL onto conventional cryoEM sample supports, maintained at the dew point. This is followed by automatic vitrification for cryoEM imaging. Coupled with a fluorescence microscope, this setup allows for the extraction of a targeted subcellular volume from an individual cell and subsequent dispensing of the aspirated content onto an electron microscopy grid. A proof-of-concept is demonstrated by dispensing femtolitre volumes of the standard cryoEM single-particle sample, tobacco mosaic virus, and performing a subcellular biopsy from a single HeLa cell. Additionally, the challenges of manipulating such small volumes for cryoEM sample preparation are discussed, highlighting the current limitations of this approach and potential solutions for overcoming them.

We detail the analysis of centrifugal homogenization process by a hydrodynamic model and the model-guided design of a low-cost centrifugal homogenizer. During operation, centrifugal force pushes a multiphase solution to be homogenized through a thin nozzle, consequently homogenizing its contents. We demonstrate and assess the homogenization of coarse emulsions into relatively monodisperse emulsions, as well as the application of centrifugal homogenization in the mechanical lysis of mpkCCD mouse kidney cells. To gain insight into the homogenization mechanism, we investigate the dependence of emulsion droplet size on geometrical parameters, centrifugal acceleration, and dispersed phase viscosity. Our experimental results are in qualitative agreement with models predicting the droplet size. Furthermore, they indicate that high shear rates kept constant throughout operation produce more monodisperse droplets. We show this ideal homogenization condition can be realized through hydrodynamic model-guided design minimizing transient effects inherent to centrifugal homogenization. Moreover, we achieved power densities comparable to commercial homogenizers by model guided optimization of homogenizer design and experimental conditions. Centrifugal homogenization using the proposed homogenizer design thus offers a low-cost alternative to existing technologies as it is constructed from off-the-shelf parts (Falcon tubes, syringe, needles) and used with a centrifuge, readily available in standard laboratory environment.

The steep increase of atomic scale structures determined by 3D cryo-electron microscopy (EM) deposited in the EMDataBank documents progress of a methodology that was frustratingly slow ten years ago. While sample vitrification on grids has been successfully used in all EM laboratories for decades, beam damage remains a road block. Developments in instrumentation and software to exploit the information carried by elastically scattered electrons made the task to achieve atomic scale resolution easier. This together with the development of fast single electron detecting cameras has resulted in unprecedented possibilities for structure determination by 3D cryo-EM. With such technologies in place, the purification of membrane protein complexes in a functional state is key to collecting atomic scale structural information and insight into the chemistry of physiological processes. Therefore, we focus here on the preparation of membrane proteins for structural analyses by 3D cryo-EM and the data acquisition of such vitrified samples.