Austenitic stainless steels similar to type AISI 316L are widely used structural materials in current and future nuclear reactors. Careful development and characterization of these materials and their welds is needed to verify the structural integrity of large-scale multicomponent structures. Understanding the local deformation behavior in heterogeneous materials and the mechanisms involved is key to further improve the performance and reliability of the materials at the global scale and can help in developing more accurate models and design rules. The full-field 3D digital image correlation (3D-DIC) technique was used to characterize two 316L multi-pass welds, based on cylindrical uniaxial tensile tests at room temperature, 350 °C, and 450 °C. The results were compared to solution annealed 316L material. The inhomogeneous character and dynamic behavior of the 316L base and weld materials were successfully characterized using 3D-DIC data, yielding high-quality and accurate local strain calculations for geometrically challenging conditions. The difference in character of the dynamic strain aging (DSA) effect present in base and weld materials was identified, where local inhomogeneous straining in weld material resulted in discontinuous type A Portevin–Le Châtelier (PLC) bands. This technique characterized the difference between local and global material behavior, whereas standard mechanical tests could not.@en

MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) is an accelerator driven system, currently under development at SCK CEN in Mol, Belgium. This nuclear system will use liquid Lead-Bismuth eutectic alloy as a spallation target for fast neutron production and as coolant. The ideal structural material for a liquid metal cooled reactor should be unsusceptible to both liquid metal embrittlement and liquid metal corrosion, while possessing high toughness. Nuclear grade austenitic stainless steels similar to AISI 316L have therefore been chosen as the main candidate structural materials for MYRRHA. In the framework of the qualification of those candidates, a specific batch of this material has shown unexpectedly poor mechanical properties, which triggered the need of in-depth microstructural analysis. The behaviour was attributed to the unexpected and undesired presence of intermetallic σ-phase. The σ-phase was identified with a high confidence by combining the data for chemical composition from energy-dispersive X-ray spectroscopy and crystallographic information from electron backscatter diffraction by comparing simulated Kikuchi diffraction patterns with experimentally recorded ones. At first sight the optical appearance of σ-phase resembles δ-ferrite islands, which results in the risk of overlooking this when only classical material qualification methods are used. When left undetected, testing this material including the brittle σ-phase in a liquid metal environment, in combination with miniature mechanical test specimens, could lead to misinterpretation of embrittlement of the austenitic matrix.@en