The excitation and vibration triggered by the long-term operation of railway vehicles inevitably result in defective states of catenary support devices. With the massive construction of high-speed electrified railways, automatic defect detection of diverse and plentiful fasteners on the catenary support device is of great significance for operation safety and cost reduction. Nowadays, the catenary support devices are periodically captured by the cameras mounted on the inspection vehicles during the night, but the inspection still mostly relies on human visual interpretation. To reduce the human involvement, this paper proposes a novel vision-based method that applies the deep convolutional neural networks (DCNNs) in the defect detection of the fasteners. Our system cascades three DCNN-based detection stages in a coarse-to-fine manner, including two detectors to sequentially localize the cantilever joints and their fasteners and a classifier to diagnose the fasteners' defects. Extensive experiments and comparisons of the defect detection of catenary support devices along the Wuhan-Guangzhou high-speed railway line indicate that the system can achieve a high detection rate with good adaptation and robustness in complex environments.@en

This article proposes an automatic high-precision detection method for structure parameters of catenary cantilever devices (SPCCDs) using 3-D point cloud data. The steps of the proposed detection method are: 1) segmenting and recognizing the components of the catenary cantilever devices, 2) extracting the detection plane and backbone component axis of catenary cantilever devices, and 3) detecting the SPCCD. The effective segmentation of components is critical for structure parameter detection. A point cloud segmentation and recognition method based on three-dimensional convolutional neural networks (3-D CNNs) is introduced to determine the different components of the catenary cantilever devices. Compared with traditional unsupervised clustering procedures for point cloud segmentation, the proposed method can improve the segmentation accuracy, does not require complex tuning procedures of parameters, and improves robustness and stability. Additionally, the segmentation method defines a recognition function, facilitating the analysis of the structural relationship between objects. Furthermore, we proposed an improved projection random sample consensus (RANSAC) method, which can effectively divide the detection plane of catenary cantilever devices to solve the multicantilever device occlusion problem. With RANSAC, it is also possible to precisely extract the backbone component axis and enhance parameter detection accuracy. The experimental results show that the structure angle and steady arm slope's error accuracy can achieve 0.1029° and 1.19%, respectively, which indicates the proposed approach can precisely detect the SPCCD.@en

Brace sleeve (BS) fasteners, i.e., nut and bolt, are small components but play essential roles in fixing BS and cantilever in railway catenary system. They are commonly inspected by onboard cameras using computer vision to ensure the safety of railway operation. However, most BS fasteners cannot be directly localized because they are too small in the inspection images. Instead, the BS is first localized for detecting the BS fastener. This leads to a new problem that the localized BS boxes may not contain the complete BS fasteners due to low localization accuracy, making it infeasible to further diagnose the fastener conditions. To tackle this problem, this article proposes a novel pipeline for BS fastener looseness diagnosis. First, the competitive deep learning model Faster RCNN ResNet101 is used to coarsely localize BSs. Second, an action-driven reinforcement learning agent is adopted to refine the coarse-localized boxes through a dynamic position searching process. Then, BS fasteners are extracted from the refined localized BS image by the deep segmentation model YOLACT++, which is fast and interpretable. Finally, a looseness diagnosis criterion based on segmented information are proposed. We evaluate the performance of submodels independently and the overall performance of the whole model on a real-life catenary image dataset collected from a high-speed line in China. The test results show that the proposed method is effective for BS looseness detection in railway catenary.@en