As an environmentally responsible alternative to conventional concrete, geopolymer concrete recycles previously used resources to prepare the cementitious component of the product. The challenging issue with employing geopolymer concrete in the building business is the absence of a standard mix design. According to the chemical composition of its components, this work proposes a thorough system or framework for estimating the compressive strength of fly ash-based geopolymer concrete (FAGC). It could be possible to construct a system for predicting the compressive strength of FAGC using soft computing methods, thereby avoiding the requirement for time-consuming and expensive experimental tests. A complete database of 162 compressive strength datasets was gathered from the research papers that were published between the years 2000 and 2020 and prepared to develop proposed models. To address the relationships between inputs and output variables, long short-term memory networks were deployed. Notably, the proposed model was examined using several soft computing methods. The modeling process incorporated 17 variables that affect the CSFAG, such as percentage of SiO2 (SiO2), percentage of Na2O (Na2O), percentage of CaO (CaO), percentage of Al2O3 (Al2O3), percentage of Fe2O3 (Fe2O3), fly ash (FA), coarse aggregate (CAgg), fine aggregate (FAgg), Sodium Hydroxide solution (SH), Sodium Silicate solution (SS), extra water (EW), superplasticizer (SP), SH concentration, percentage of SiO2 in SS, percentage of Na2O in SS, curing time, curing temperature that the proposed model was examined to several soft computing methods such as multi-layer perception neural network (MLPNN), Bayesian regularized neural network (BRNN), generalized feed-forward neural networks (GFNN), support vector regression (SVR), decision tree (DT), random forest (RF), and LSTM. Three main innovations of this study are using the LSTM model for predicting FAGC, optimizing the LSTM model by a new evolutionary algorithm called the marine predators algorithm (MPA), and considering the six new inputs in the modeling process, such as aggregate to total mass ratio, fine aggregate to total aggregate mass ratio, FASiO2:Al2O3 molar ratio, FA SiO2:Fe2O3 molar ratio, AA Na2O:SiO2 molar ratio, and the sum of SiO2, Al2O3, and Fe2O3 percent in FA. The performance capacity of LSTM-MPA was evaluated with other artificial intelligence models. The results indicate that the R2 and RMSE values for the proposed LSTM-MPA model were as follows: MLPNN (R2 = 0.896, RMSE = 3.745), BRNN (R2 = 0.931, RMSE = 2.785), GFFNN (R2 = 0.926, RMSE = 2.926), SVR-L (R2 = 0.921, RMSE = 3.017), SVR-P (R2 = 0.920, RMSE = 3.291), SVR-S (R2 = 0.934, RMSE = 2.823), SVR-RBF (R2 = 0.916, RMSE = 3.114), DT (R2 = 0.934, RMSE = 2.711), RF (R2 = 0.938, RMSE = 2.892), LSTM (R2 = 0.9725, RMSE = 1.7816), LSTM-MPA (R2 = 0.9940, RMSE = 0.8332), and LSTM-PSO (R2 = 0.9804, RMSE = 1.5221). Therefore, the proposed LSTM-MPA model can be employed as a reliable and accurate model for predicting CSFAG. Noteworthy, the results demonstrated the significance and influence of fly ash and sodium silicate solution chemical compositions on the compressive strength of FAGC. These variables could adequately present variations in the best mix designs discovered in earlier investigations. The suggested approach may also save time and money by accurately estimating the compressive strength of FAGC with low calcium content. @en

The design of geopolymer concrete must meet more stringent requirements for the landscape, so understanding and designing geopolymer concrete with a higher compressive strength challenging. In the performance prediction of geopolymer concrete compressive strength, machine learning models have the advantage of being more accurate and faster. However, only a single machine learning model is usually used at present, there are few applications of ensemble learning models, and model optimization processes is lacking. Therefore, this paper proposes to use the Firefly Algorithm (AF) as an optimization tool to perform hyperparameter tuning on Logistic Regression (LR), Multiple Logistic Regression (MLR), decision tree (DT), and Random Forest (RF) models. At the same time, the reliability and efficiency of four integrated learning models were analyzed. The model was used to analyze the influencing factors of geopolymer concrete and determine the strength of their influencing ability. According to the experimental data, the RF-AF model had the lowest RMSE value. The RMSE value of the training set and test set were 4.0364 and 8.7202, respectively. The R value of the training set and test set were 0.9774 and 0.8915, respectively. Therefore, compared with the other three models, RF-AF has a stronger generalization ability and higher prediction accuracy. In addition, the molar concentration of NaOH was the most important influencing factors, and its influence was far greater than the other possible factors including NaOH content. Therefore, it is necessary to pay more attention to NaOH molarity when designing geopolymer concrete.@en